• Smoke Test On Colors Page

    0h:2m:17s+539ms

    23:23:05 PM
    Smoke Test On Colors Page
    2024-12-19 23:23:05 2024-12-19 23:25:22 0h:2m:17s+539ms
    Status Timestamp Details
    23:23:17 Click on th setting button
    23:23:22 Navigate to the setup wizard
    23:23:23 Click on the 'Colors' tab
    23:23:25 Click on the add button
    23:23:26 Enter Test Color 0673 in the color name field
    23:23:27 Enter #545686 in the Color Code field
    23:23:28 Enter 0 in the color transparency input field
    23:23:29 Select color from hex code
    23:23:29 Click on the save button
    23:23:43 Save the Data in the Setup Wizard
    23:23:47 Click on th setting button
    23:24:13 Navigate to the color page
    23:24:15 Verify that the new color is add to the color table.
    23:24:15 Click on the New material color from the Colors table
    23:24:15 Click on the Back to List button
    23:24:15 Verify that the back-to-list button navigates to the colors page.
    23:24:17 Click on the Download XLSX file button
    23:24:27 Verify that the XLSX file is downloaded
    23:24:28 Click on the Download CSV file button
    23:24:33 Verify that the CSV file is downloaded
    23:24:38 Verify that the CSV file is downloaded
    23:24:39 Again Click on the New material color from the Colors table
    23:24:40 Change the Color Name
    23:24:40 Change the Texture dropdown value on Colors Page.
    23:24:40 Change the BumpMap dropdown value on Colors Page.
    23:24:42 Click on the Save button
    23:24:43 Click on th setting button
    23:24:47 Navigate to the setup wizard
    23:24:48 Click on the 'Colors' tab
    23:24:49 Verify that Color Name has been changing after color name change on the colors page.
    23:24:50 Verify that Color Map has been changing after color Map change on the colors page.
    23:24:50 Verify that Bump Map has been changing after color Map change on the colors page.
    23:24:50 Click on the cancel button
    23:25:02 Delete Test Master 123 data from setup wizard
    23:25:15 Save the Data in the Setup Wizard
    23:25:22 Test Pass
  • Smoke Test On The Customize Page

    0h:6m:54s+283ms

    23:25:37 PM
    Smoke Test On The Customize Page
    2024-12-19 23:25:37 2024-12-19 23:32:31 0h:6m:54s+283ms
    Status Timestamp Details
    23:25:45 Click on th setting button
    23:25:46 Navigate to the customize page
    23:25:46 Check the 'Include checkbox' checkbox
    23:25:46 Check the 'WaterMark checkbox' checkbox
    23:26:20 Verify that all checkboxes are check
    23:26:23 Verify that the Home, About, and Contact fields are editable
    23:26:24 Click on Upload button and upload D:\newCloneTest27-11-24\smartbuildautomatedtesting\Folder\Images\sample.pdf
    23:26:25 Show alert messageFile should be of format .png or .jpg or .jpeg
    23:26:26 Click on the 'okay button'
    23:26:26 Click on Upload button and upload D:\newCloneTest27-11-24\smartbuildautomatedtesting\Folder\Images\file-csv.csv
    23:26:28 Show alert messageFile should be of format .png or .jpg or .jpeg
    23:26:29 Click on the 'okay button'
    23:26:29 Click on Upload button and upload D:\newCloneTest27-11-24\smartbuildautomatedtesting\Folder\Images\5mb.png
    23:26:30 Show alert messageFile size should be 1 mb or less
    23:26:31 Click on the 'okay button'
    23:26:31 Upload image size should be less than 1 mb
    23:26:37 Click on the 'save button'
    23:26:38 Click on th setting button
    23:26:39 Navigate to the customize page
    23:26:41 Click on the 'delete button'
    23:26:42 Click on the 'save button'
    23:26:44 Click on th setting button
    23:26:45 Navigate to the customize page
    23:26:45 Enter Home field https://www.google.com/
    23:26:45 Enter About field https://www.wikipedia.org/
    23:26:45 Enter ContactS field https://www.facebook.com/
    23:26:47 Click on the 'save button'
    23:27:11 Verify that click on the logo icon is redirected to the https://www.google.com/
    23:27:41 Verify that click on the about button is redirected to the https://www.google.com/
    23:28:06 Verify that click on the contact button is redirected to the https://www.google.com/
    23:28:07 Click on th setting button
    23:28:09 Navigate to the customize page
    23:28:09 Clear data from the Home, About, and Contact field
    23:28:11 Click on the 'save button'
    23:28:34 Verify that click on the logo icon is redirected to the https://smartbuildsystems.com/
    23:28:57 Verify that click on the about button is redirected to the https://smartbuildsystems.com/
    23:29:19 Verify that click on the contact button is redirected to the https://smartbuildsystems.com/
    23:29:21 Click on th setting button
    23:29:22 Navigate to the customize page
    23:29:22 Uncheck the Support Checkbox'
    23:29:23 Click on the 'save button'
    23:29:23 In the home Page:
    23:29:23 The support button disappears when the include support checkbox is Unchecked
    23:29:25 Click on the job tab
    23:29:36 open Zombie Parts job
    23:29:42 In the default job:
    23:29:42 The support button disappears when the include support checkbox is Unchecked
    23:29:42 The Help button disappears when the include support checkbox is Unchecked
    23:29:44 Click on the 'Job List' button'
    23:29:45 Click on th setting button
    23:29:46 Navigate to the customize page
    23:29:46 Check the Support Checkbox'
    23:29:48 Click on the 'save button'
    23:29:48 In the home Page:
    23:29:48 The Support button appears when the include support checkbox is check
    23:29:50 Click on the job tab
    23:30:01 open Zombie Parts job
    23:30:09 In the default job:
    23:30:09 The Support button appears when the include support checkbox is check
    23:30:09 The Help button appears when the include support checkbox is check
    23:30:11 Click on the 'Job List' button'
    23:30:13 Click on th setting button
    23:30:19 Navigate to the setup wizard
    23:30:21 Click on the 'Colors' tab
    23:30:22 Click on the add button
    23:30:24 Enter Test Color 0673 in the color name field
    23:30:25 Enter 0 in the color transparency input field
    23:30:25 Enter #545686 in the Color Code field
    23:30:26 Select color from hex code
    23:30:27 Click on the save button
    23:30:41 Save the Data in the Setup Wizard
    23:30:45 Navigate to Gmail account
    23:30:47 Enter username
    23:30:53 Click on the next button
    23:30:58 Enter Password
    23:31:10 Click on the next button
    23:31:13 Verify that the user receive the Gmail
    23:31:14 Click on th setting button
    23:31:19 Navigate to the setup wizard
    23:31:20 Click on the 'Colors' tab
    23:31:32 Delete Test Color 0673 data from setup wizard
    23:31:46 Save the Data in the Setup Wizard
    23:31:47 Click on th setting button
    23:31:48 Navigate to the customize page
    23:32:22 Verify that all checkboxes are check
    23:32:24 Click on the 'save button'
    23:32:31 Test Pass
  • Smoke Test On Packages Page

    0h:4m:12s+613ms

    23:32:41 PM
    Smoke Test On Packages Page
    2024-12-19 23:32:41 2024-12-19 23:36:54 0h:4m:12s+613ms
    Status Timestamp Details
    23:32:41 Main
    23:32:49 Click on th setting button
    23:32:53 Navigate to the job page
    23:32:54 Click on the add new button
    23:32:54 Click on the blank button
    23:32:56 Enter Roofing.Group1 in the group name field
    23:32:58 Enter Test 1 in the package name field
    23:33:02 Select Bundle from the packages type dropdown
    23:33:05 Select On from the default setting dropdown
    23:33:06 Enter data in the Info Text Field
    23:33:07 Click on the add misc button
    23:33:12 Select Accessories from the output category dropdown
    23:33:17 Select yes from Taxable Element dropdown
    23:33:19 Enter Testing data in the usage field
    23:33:22 Click on the Calculation button
    23:33:22 Select ceiling LF from table
    23:33:22 Click on the question button
    23:33:23 Enter data in the question field
    23:33:23 Enter data in the default field
    23:33:23 Click on the ok button
    23:33:23 Click on the test button
    23:33:25 Enter data in the Ceiling LF field
    23:33:25 Enter data in the Test field
    23:33:25 Click on the calculation field
    23:33:30 Verify that the calculation is correct
    23:33:30 Click on the close button
    23:33:31 Click on the save button
    23:33:36 Click on the 'add catalog button' tab
    23:33:37 Enter Testing data in the usage field
    23:33:42 Select Fastener from the catalog category dropdown
    23:33:46 Select ROOFING NAILS 2 1/2 FlatHead from the catalog item dropdown
    23:33:51 Select Cladding from the output category dropdown
    23:33:53 Click on the Calculation button
    23:33:53 Select ceiling LF from table
    23:33:53 Click on the question button
    23:33:54 Enter data in the question field
    23:33:54 Enter data in the default field
    23:33:55 Click on the ok button
    23:33:55 Click on the test button
    23:33:56 Enter data in the Ceiling LF field
    23:33:56 Enter data in the Test field
    23:33:56 Click on the calculation field
    23:34:01 Verify that the calculation is correct
    23:34:01 Click on the close button
    23:34:03 Click on the save button
    23:34:05 Click on the add misc button
    23:34:07 Enter Testing data in the usage field
    23:34:12 Select yes from Taxable Element dropdown
    23:34:15 Click on the Calculation button
    23:34:15 Select ceiling LF from table
    23:34:15 Click on the question button
    23:34:17 Enter data in the question field
    23:34:17 Enter data in the default field
    23:34:17 Click on the ok button
    23:34:17 Click on the test button
    23:34:18 Enter data in the Ceiling LF field
    23:34:18 Enter data in the Test field
    23:34:19 Click on the calculation field
    23:34:24 Verify that the calculation is correct
    23:34:24 Click on the close button
    23:34:25 Click on the save button
    23:34:29 Click on the add new button
    23:34:29 Click on the blank button
    23:34:31 Enter Roofing.Group2 in the group name field
    23:34:32 Enter Test 2 in the package name field
    23:34:36 Select Bundle from the packages type dropdown
    23:34:40 Select On from the default setting dropdown
    23:34:40 Enter data in the Info Text Field
    23:34:42 Click on the add misc button
    23:34:44 Enter Testing data in the usage field
    23:34:48 Enter data in SKu and other field
    23:34:48 Select yes from Taxable Element dropdown
    23:34:51 Click on the Calculation button
    23:34:52 Select ceiling LF from table
    23:34:52 Click on the question button
    23:34:53 Enter data in the question field
    23:34:53 Enter data in the default field
    23:34:53 Click on the ok button
    23:34:53 Click on the test button
    23:34:54 Enter data in the Ceiling LF field
    23:34:55 Enter data in the Test field
    23:34:55 Click on the calculation field
    23:35:00 Verify that the calculation is correct
    23:35:00 Click on the close button
    23:35:01 Click on the save button
    23:35:06 Click on the 'add catalog button' tab
    23:35:07 Enter Testing data in the usage field
    23:35:12 Select Fastener from the catalog category dropdown
    23:35:16 Select ROOFING NAILS 2 1/2 FlatHead from the catalog item dropdown
    23:35:20 Select Cladding from the output category dropdown
    23:35:23 Click on the Calculation button
    23:35:23 Select ceiling LF from table
    23:35:23 Click on the question button
    23:35:24 Enter data in the question field
    23:35:24 Enter data in the default field
    23:35:24 Click on the ok button
    23:35:24 Click on the test button
    23:35:26 Enter data in the Ceiling LF field
    23:35:26 Enter data in the Test field
    23:35:26 Click on the calculation field
    23:35:31 Verify that the calculation is correct
    23:35:31 Click on the close button
    23:35:32 Click on the save button
    23:35:35 Click on the add misc button
    23:35:37 Enter Testing data in the usage field
    23:35:42 Select yes from Taxable Element dropdown
    23:35:45 Click on the Calculation button
    23:35:45 Select ceiling LF from table
    23:35:45 Click on the question button
    23:35:46 Enter data in the question field
    23:35:46 Enter data in the default field
    23:35:47 Click on the ok button
    23:35:47 Click on the test button
    23:35:48 Enter data in the Ceiling LF field
    23:35:48 Enter data in the Test field
    23:35:48 Click on the calculation field
    23:35:53 Verify that the calculation is correct
    23:35:53 Click on the close button
    23:35:55 Click on the save button
    23:36:08 Click on the save button
    23:36:10 Click on th setting button
    23:36:13 Navigate to the job page
    23:36:14 Click on the Roofing.Group1
    23:36:15 Verify that edit button is working
    23:36:19 Click on the Down Arrow button
    23:36:19 Verify that the element is going to the down of the table after clicking the Arrow down button
    23:36:19 Click on the Down Arrow button
    23:36:19 Verify that the element is going to the top of the table after clicking the Arrow up button
    23:36:19 Click on thw Copy button
    23:36:19 Copy Test1 element in the Roofing.Group2 Material
    23:36:21 Click on the Roofing.Group2 package
    23:36:22 Verify that the Test1 data is copy to the Roofing.Group1 Packages.
    23:36:24 Verify that the Test1 data is move to the Roofing.Group2 Packages.
    23:36:27 Click on the Delete button
    23:36:37 Click on the save button
    23:36:54 Test Pass
  • Smoke20x20x10 Job

    0h:2m:4s+069ms

    23:37:14 PM
    Smoke20x20x10 Job
    2024-12-19 23:37:14 2024-12-19 23:39:18 0h:2m:4s+069ms
    Status Timestamp Details
    23:37:14 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    23:37:14 Login to AUTOTEST_PHTEST Distributor for Test Environment
    23:37:44 Click on the 'job review button' tab
    23:37:46 Click on the Summary
    23:37:47 Click on the Framing
    23:37:49 Click on the Sheathing
    23:37:50 Click on the Trim
    23:37:52 Click on the Trusses
    23:37:58 Login to AUTOTEST_PHTEST Distributor for Beta Environment
    23:38:23 Click on the 'job review button' tab
    23:38:25 Click on the Summary
    23:38:26 Click on the Framing
    23:38:28 Click on the Sheathing
    23:38:29 Click on the Trim
    23:38:31 Click on the Trusses
    23:38:36 Login to AUTOTEST_PHTEST Distributor for Production Environment
    23:39:07 Click on the 'job review button' tab
    23:39:08 Click on the Summary
    23:39:10 Click on the Framing
    23:39:11 Click on the Sheathing
    23:39:13 Click on the Trim
    23:39:15 Click on the Trusses
    23:39:16 Summary Data are the same for Beta, Test, and Production
    23:39:17 Framing Data are the same for Beta, Test, and Production
    23:39:17 Sheathing Data are the same for Beta, Test, and Production
    23:39:17 Trim Data are the same for Beta, Test, and Production
    23:39:18 Trusses Data are the same for Beta, Test, and Production
    23:39:18 Test Pass
  • Medium Performance Job

    0h:3m:0s+333ms

    23:39:23 PM
    Medium Performance Job
    2024-12-19 23:39:23 2024-12-19 23:42:23 0h:3m:0s+333ms
    Status Timestamp Details
    23:39:27 Login to AUTOTEST_PHTEST Distributor for Test Environment
    23:40:08 Click on the 'job review button' tab
    23:40:09 Click on the Summary
    23:40:11 Click on the Framing
    23:40:13 Click on the Sheathing
    23:40:14 Click on the Trim
    23:40:16 Click on the Accessories
    23:40:18 Click on the Doors & Windows
    23:40:19 Click on the Trusses
    23:40:43 Login to AUTOTEST_PHTEST Distributor for Beta Environment
    23:41:17 Click on the 'job review button' tab
    23:41:19 Click on the Summary
    23:41:20 Click on the Framing
    23:41:22 Click on the Sheathing
    23:41:24 Click on the Trim
    23:41:25 Click on the Accessories
    23:41:27 Click on the Doors & Windows
    23:41:28 Click on the Trusses
    23:41:34 Login to AUTOTEST_PHTEST Distributor for Production Environment
    23:42:10 Click on the 'job review button' tab
    23:42:12 Click on the Summary
    23:42:13 Click on the Framing
    23:42:15 Click on the Sheathing
    23:42:17 Click on the Trim
    23:42:18 Click on the Accessories
    23:42:20 Click on the Doors & Windows
    23:42:21 Click on the Trusses
    23:42:22 Summary Data are the same for Production, Beta, and Different for Test
    23:42:22 Framing Data are the same for Production, Beta, and Different for Test
    23:42:22 Sheathing Data are the same for Beta, Test, and Production
    23:42:22 Trim Data are the same for Beta, Test, and Production
    23:42:23 Door & Windows Data are the same for Beta, Test, and Production
    23:42:23 Accessories Data are the same for Beta, Test, and Production
    23:42:23 Trusses Data are the same for Beta, Test, and Production
    23:42:23 Test FailMultiple failures or warnings in test: 1) Summary Data are the same for Production, Beta, and Different for Test 2) Framing Data are the same for Production, Beta, and Different for Test
    23:42:23 base64-img
  • Large Performance Test Job

    0h:3m:17s+651ms

    23:42:27 PM
    Large Performance Test Job
    2024-12-19 23:42:27 2024-12-19 23:45:45 0h:3m:17s+651ms
    Status Timestamp Details
    23:42:32 Login to AUTOTEST_PHTEST Distributor for Test Environment
    23:43:22 Click on the 'job review button' tab
    23:43:23 Click on the Summary
    23:43:24 Click on the Framing
    23:43:26 Click on the Sheathing
    23:43:29 Click on the Trim
    23:43:30 Click on the Doors & Windows
    23:43:32 Click on the Trusses
    23:43:37 Login to AUTOTEST_PHTEST Distributor for Beta Environment
    23:44:27 Click on the 'job review button' tab
    23:44:29 Click on the Summary
    23:44:30 Click on the Framing
    23:44:32 Click on the Sheathing
    23:44:34 Click on the Trim
    23:44:36 Click on the Doors & Windows
    23:44:38 Click on the Trusses
    23:44:42 Login to AUTOTEST_PHTEST Distributor for Production Environment
    23:45:33 Click on the 'job review button' tab
    23:45:34 Click on the Summary
    23:45:36 Click on the Framing
    23:45:38 Click on the Sheathing
    23:45:40 Click on the Trim
    23:45:42 Click on the Doors & Windows
    23:45:43 Click on the Trusses
    23:45:43 Summary Data is different on all servers
    23:45:44 Framing Data are the same for Production, Beta, and Different for Test
    23:45:44 Sheathing Data are the same for Beta, Test, and Production
    23:45:44 Trim Data is different on all servers
    23:45:44 Door & Windows Data are the same for Beta, Test, and Production
    23:45:44 Trusses Data are the same for Beta, Test, and Production
    23:45:45 Test FailMultiple failures or warnings in test: 1) Summary Data is different on all servers 2) Framing Data are the same for Production, Beta, and Different for Test 3) Trim Data is different on all servers
    23:45:45 base64-img
  • Large Cross Job

    0h:3m:45s+404ms

    23:45:50 PM
    Large Cross Job
    2024-12-19 23:45:50 2024-12-19 23:49:36 0h:3m:45s+404ms
    Status Timestamp Details
    23:45:50 AUTOTEST_PHTEST
    23:45:55 Login to AUTOTEST_PHTEST Distributor for Test Environment
    23:46:55 Click on the 'job review button' tab
    23:46:56 Click on the Summary
    23:46:58 Click on the Framing
    23:47:00 Click on the Sheathing
    23:47:01 Click on the Trim
    23:47:03 Click on the Doors & Windows
    23:47:05 Click on the Trusses
    23:47:21 Login to AUTOTEST_PHTEST Distributor for Beta Environment
    23:48:10 Click on the 'job review button' tab
    23:48:11 Click on the Summary
    23:48:12 Click on the Framing
    23:48:14 Click on the Sheathing
    23:48:16 Click on the Trim
    23:48:18 Click on the Doors & Windows
    23:48:20 Click on the Trusses
    23:48:25 Login to AUTOTEST_PHTEST Distributor for Production Environment
    23:49:24 Click on the 'job review button' tab
    23:49:25 Click on the Summary
    23:49:27 Click on the Framing
    23:49:29 Click on the Sheathing
    23:49:31 Click on the Trim
    23:49:33 Click on the Doors & Windows
    23:49:34 Click on the Trusses
    23:49:34 Summary Data are the same for Beta, Test, and Production
    23:49:35 Framing Data are the same for Beta, Test, and Production
    23:49:35 Sheathing Data are the same for Beta, Test, and Production
    23:49:35 Trim Data are the same for Production, Beta, and Different for Test
    23:49:35 Door & Windows Data are the same for Beta, Test, and Production
    23:49:35 Trusses Data are the same for Beta, Test, and Production
    23:49:35 Test FailTrim Data are the same for Production, Beta, and Different for Test
    23:49:36 base64-img
  • 30x40x16 Job

    0h:2m:36s+703ms

    23:49:42 PM
    30x40x16 Job
    2024-12-19 23:49:42 2024-12-19 23:52:19 0h:2m:36s+703ms
    Status Timestamp Details
    23:49:46 Login to AUTOTEST_PHTEST Distributor for Test Environment
    23:50:23 Click on the 'job review button' tab
    23:50:24 Click on the Summary
    23:50:26 Click on the Framing
    23:50:27 Click on the Sheathing
    23:50:29 Click on the Trim
    23:50:30 Click on the Doors & Windows
    23:50:32 Click on the Trusses
    23:50:47 Login to AUTOTEST_PHTEST Distributor for Beta Environment
    23:51:17 Click on the 'job review button' tab
    23:51:18 Click on the Summary
    23:51:20 Click on the Framing
    23:51:21 Click on the Sheathing
    23:51:23 Click on the Trim
    23:51:25 Click on the Doors & Windows
    23:51:26 Click on the Trusses
    23:51:32 Login to AUTOTEST_PHTEST Distributor for Production Environment
    23:52:08 Click on the 'job review button' tab
    23:52:10 Click on the Summary
    23:52:11 Click on the Framing
    23:52:13 Click on the Sheathing
    23:52:14 Click on the Trim
    23:52:16 Click on the Doors & Windows
    23:52:18 Click on the Trusses
    23:52:18 Summary Data are the same for Production, Beta, and Different for Test
    23:52:18 Framing Data are the same for Production, Beta, and Different for Test
    23:52:18 Sheathing Data are the same for Beta, Test, and Production
    23:52:18 Trim Data are the same for Production, Beta, and Different for Test
    23:52:19 Door & Windows Data are the same for Beta, Test, and Production
    23:52:19 Trusses Data are the same for Beta, Test, and Production
    23:52:19 Test FailMultiple failures or warnings in test: 1) Summary Data are the same for Production, Beta, and Different for Test 2) Framing Data are the same for Production, Beta, and Different for Test 3) Trim Data are the same for Production, Beta, and Different for Test
    23:52:19 base64-img
  • Gambrel Roof Job

    0h:2m:16s+084ms

    23:52:27 PM
    Gambrel Roof Job
    2024-12-19 23:52:27 2024-12-19 23:54:43 0h:2m:16s+084ms
    Status Timestamp Details
    23:52:31 Login to AUTOTEST_PHTEST Distributor for Test Environment
    23:53:03 Click on the 'job review button' tab
    23:53:04 Click on the Summary
    23:53:05 Click on the Framing
    23:53:07 Click on the Sheathing
    23:53:09 Click on the Trim
    23:53:10 Click on the Trusses
    23:53:24 Login to AUTOTEST_PHTEST Distributor for Beta Environment
    23:53:51 Click on the 'job review button' tab
    23:53:53 Click on the Summary
    23:53:54 Click on the Framing
    23:53:56 Click on the Sheathing
    23:53:57 Click on the Trim
    23:53:59 Click on the Trusses
    23:54:04 Login to AUTOTEST_PHTEST Distributor for Production Environment
    23:54:34 Click on the 'job review button' tab
    23:54:36 Click on the Summary
    23:54:37 Click on the Framing
    23:54:39 Click on the Sheathing
    23:54:40 Click on the Trim
    23:54:42 Click on the Trusses
    23:54:42 Summary Data are the same for Beta, Test, and Production
    23:54:42 Framing Data are the same for Beta, Test, and Production
    23:54:42 Sheathing Data are the same for Beta, Test, and Production
    23:54:43 Trim Data are the same for Production, Beta, and Different for Test
    23:54:43 Trusses Data are the same for Beta, Test, and Production
    23:54:43 Test FailTrim Data are the same for Production, Beta, and Different for Test
    23:54:43 base64-img
  • Template 2 Job

    0h:2m:48s+160ms

    23:54:48 PM
    Template 2 Job
    2024-12-19 23:54:48 2024-12-19 23:57:36 0h:2m:48s+160ms
    Status Timestamp Details
    23:54:48 AUTOTEST_PHTEST
    23:54:52 Login to AUTOTEST_PHTEST Distributor for Test Environment
    23:55:37 Click on the 'job review button' tab
    23:55:39 Click on the Summary
    23:55:40 Click on the Framing
    23:55:42 Click on the Sheathing
    23:55:44 Click on the Trim
    23:55:50 Login to AUTOTEST_PHTEST Distributor for Beta Environment
    23:56:29 Click on the 'job review button' tab
    23:56:30 Click on the Summary
    23:56:32 Click on the Framing
    23:56:34 Click on the Sheathing
    23:56:35 Click on the Trim
    23:56:40 Login to AUTOTEST_PHTEST Distributor for Production Environment
    23:57:28 Click on the 'job review button' tab
    23:57:30 Click on the Summary
    23:57:31 Click on the Framing
    23:57:33 Click on the Sheathing
    23:57:35 Click on the Trim
    23:57:35 Summary Data is different on all servers
    23:57:36 Framing Data is different on all servers
    23:57:36 Sheathing Data are the same for Beta, Test, and Production
    23:57:36 Trim Data is different on all servers
    23:57:36 Test FailMultiple failures or warnings in test: 1) Summary Data is different on all servers 2) Framing Data is different on all servers 3) Trim Data is different on all servers
    23:57:36 base64-img
  • Template 3 Job

    0h:3m:11s+956ms

    23:57:41 PM
    Template 3 Job
    2024-12-19 23:57:41 2024-12-20 00:00:53 0h:3m:11s+956ms
    Status Timestamp Details
    23:57:45 Login to AUTOTEST_PHTEST Distributor for Test Environment
    23:58:31 Click on the 'job review button' tab
    23:58:32 Click on the Summary
    23:58:33 Click on the Framing
    23:58:35 Click on the Sheathing
    23:58:37 Click on the Trim
    23:58:39 Click on the Accessories
    23:58:41 Click on the Doors & Windows
    23:58:42 Click on the Trusses
    23:58:48 Login to AUTOTEST_PHTEST Distributor for Beta Environment
    23:59:39 Click on the 'job review button' tab
    23:59:41 Click on the Summary
    23:59:42 Click on the Framing
    23:59:44 Click on the Sheathing
    23:59:46 Click on the Trim
    23:59:48 Click on the Accessories
    23:59:49 Click on the Doors & Windows
    23:59:51 Click on the Trusses
    23:59:56 Login to AUTOTEST_PHTEST Distributor for Production Environment
    00:00:40 Click on the 'job review button' tab
    00:00:41 Click on the Summary
    00:00:43 Click on the Framing
    00:00:45 Click on the Sheathing
    00:00:47 Click on the Trim
    00:00:48 Click on the Accessories
    00:00:50 Click on the Doors & Windows
    00:00:51 Click on the Trusses
    00:00:52 Summary Data is different on all servers
    00:00:52 Framing Data are the same for Production, Beta, and Different for Test
    00:00:52 Sheathing Data are the same for Beta, Test, and Production
    00:00:52 Trim Data is different on all servers
    00:00:52 Door & Windows Data are the same for Beta, Test, and Production
    00:00:53 Accessories Data are the same for Beta, Test, and Production
    00:00:53 Trusses Data are the same for Beta, Test, and Production
    00:00:53 Test FailMultiple failures or warnings in test: 1) Summary Data is different on all servers 2) Framing Data are the same for Production, Beta, and Different for Test 3) Trim Data is different on all servers
    00:00:53 base64-img
  • Template 4 Job

    0h:2m:53s+273ms

    00:00:58 AM
    Template 4 Job
    2024-12-20 00:00:58 2024-12-20 00:03:52 0h:2m:53s+273ms
    Status Timestamp Details
    00:01:02 Login to AUTOTEST_PHTEST Distributor for Test Environment
    00:01:47 Click on the 'job review button' tab
    00:01:48 Click on the Summary
    00:01:50 Click on the Framing
    00:01:52 Click on the Sheathing
    00:01:53 Click on the Trim
    00:01:55 Click on the Accessories
    00:01:57 Click on the Doors & Windows
    00:01:58 Click on the Trusses
    00:02:03 Login to AUTOTEST_PHTEST Distributor for Beta Environment
    00:02:41 Click on the 'job review button' tab
    00:02:43 Click on the Summary
    00:02:44 Click on the Framing
    00:02:46 Click on the Sheathing
    00:02:48 Click on the Trim
    00:02:49 Click on the Accessories
    00:02:51 Click on the Doors & Windows
    00:02:52 Click on the Trusses
    00:02:57 Login to AUTOTEST_PHTEST Distributor for Production Environment
    00:03:39 Click on the 'job review button' tab
    00:03:40 Click on the Summary
    00:03:42 Click on the Framing
    00:03:43 Click on the Sheathing
    00:03:45 Click on the Trim
    00:03:47 Click on the Accessories
    00:03:49 Click on the Doors & Windows
    00:03:50 Click on the Trusses
    00:03:50 Summary Data is different on all servers
    00:03:50 Framing Data are the same for Production, Beta, and Different for Test
    00:03:51 Sheathing Data are the same for Beta, Test, and Production
    00:03:51 Trim Data is different on all servers
    00:03:51 Door & Windows Data are the same for Beta, Test, and Production
    00:03:51 Accessories Data are the same for Beta, Test, and Production
    00:03:51 Trusses Data are the same for Beta, Test, and Production
    00:03:52 Test FailMultiple failures or warnings in test: 1) Summary Data is different on all servers 2) Framing Data are the same for Production, Beta, and Different for Test 3) Trim Data is different on all servers
    00:03:52 base64-img
  • Wood Flr N Peak Out Job

    0h:2m:31s+894ms

    00:03:57 AM
    Wood Flr N Peak Out Job
    2024-12-20 00:03:57 2024-12-20 00:06:29 0h:2m:31s+894ms
    Status Timestamp Details
    00:04:01 Login to AUTOTEST_PHTEST Distributor for Test Environment
    00:04:39 Click on the 'job review button' tab
    00:04:41 Click on the Summary
    00:04:42 Click on the Framing
    00:04:44 Click on the Sheathing
    00:04:46 Click on the Trim
    00:04:47 Click on the Doors & Windows
    00:04:49 Click on the Trusses
    00:04:55 Login to AUTOTEST_PHTEST Distributor for Beta Environment
    00:05:26 Click on the 'job review button' tab
    00:05:28 Click on the Summary
    00:05:29 Click on the Framing
    00:05:31 Click on the Sheathing
    00:05:33 Click on the Trim
    00:05:35 Click on the Doors & Windows
    00:05:36 Click on the Trusses
    00:05:41 Login to AUTOTEST_PHTEST Distributor for Production Environment
    00:06:17 Click on the 'job review button' tab
    00:06:19 Click on the Summary
    00:06:20 Click on the Framing
    00:06:22 Click on the Sheathing
    00:06:24 Click on the Trim
    00:06:26 Click on the Doors & Windows
    00:06:27 Click on the Trusses
    00:06:27 Summary Data are the same for Test, Production, and Different for Beta
    00:06:28 Framing Data are the same for Beta, Test, and Production
    00:06:28 Sheathing Data are the same for Beta, Test, and Production
    00:06:28 Trim Data is different on all servers
    00:06:28 Door & Windows Data are the same for Beta, Test, and Production
    00:06:28 Trusses Data are the same for Beta, Test, and Production
    00:06:28 Test FailMultiple failures or warnings in test: 1) Summary Data are the same for Test, Production, and Different for Beta 2) Trim Data is different on all servers
    00:06:29 base64-img
  • GrandChild Opening Job

    0h:2m:39s+951ms

    00:06:32 AM
    GrandChild Opening Job
    2024-12-20 00:06:32 2024-12-20 00:09:12 0h:2m:39s+951ms
    Status Timestamp Details
    00:06:38 Login to AUTOTEST_PHTEST Distributor for Test Environment
    00:07:17 Click on the 'job review button' tab
    00:07:19 Click on the Summary
    00:07:20 Click on the Framing
    00:07:22 Click on the Sheathing
    00:07:23 Click on the Trim
    00:07:25 Click on the Doors & Windows
    00:07:27 Click on the Trusses
    00:07:32 Login to AUTOTEST_PHTEST Distributor for Beta Environment
    00:08:07 Click on the 'job review button' tab
    00:08:09 Click on the Summary
    00:08:10 Click on the Framing
    00:08:12 Click on the Sheathing
    00:08:14 Click on the Trim
    00:08:15 Click on the Doors & Windows
    00:08:17 Click on the Trusses
    00:08:22 Login to AUTOTEST_PHTEST Distributor for Production Environment
    00:09:01 Click on the 'job review button' tab
    00:09:02 Click on the Summary
    00:09:04 Click on the Framing
    00:09:06 Click on the Sheathing
    00:09:07 Click on the Trim
    00:09:09 Click on the Doors & Windows
    00:09:10 Click on the Trusses
    00:09:11 Summary Data are the same for Beta, Test, and Production
    00:09:11 Framing Data are the same for Beta, Test, and Production
    00:09:11 Sheathing Data are the same for Beta, Test, and Production
    00:09:11 Trim Data are the same for Beta, Test, and Production
    00:09:11 Door & Windows Data are the same for Beta, Test, and Production
    00:09:12 Trusses Data are the same for Beta, Test, and Production
    00:09:12 Test Pass
  • Inline Building 20x40 Job

    0h:2m:39s+646ms

    00:09:18 AM
    Inline Building 20x40 Job
    2024-12-20 00:09:18 2024-12-20 00:11:57 0h:2m:39s+646ms
    Status Timestamp Details
    00:09:22 Login to AUTOTEST_PHTEST Distributor for Test Environment
    00:10:01 Click on the 'job review button' tab
    00:10:03 Click on the Summary
    00:10:04 Click on the Framing
    00:10:06 Click on the Sheathing
    00:10:08 Click on the Trim
    00:10:09 Click on the Doors & Windows
    00:10:11 Click on the Trusses
    00:10:16 Login to AUTOTEST_PHTEST Distributor for Beta Environment
    00:10:52 Click on the 'job review button' tab
    00:10:53 Click on the Summary
    00:10:55 Click on the Framing
    00:10:56 Click on the Sheathing
    00:10:58 Click on the Trim
    00:11:00 Click on the Doors & Windows
    00:11:01 Click on the Trusses
    00:11:07 Login to AUTOTEST_PHTEST Distributor for Production Environment
    00:11:47 Click on the 'job review button' tab
    00:11:48 Click on the Summary
    00:11:49 Click on the Framing
    00:11:51 Click on the Sheathing
    00:11:53 Click on the Trim
    00:11:54 Click on the Doors & Windows
    00:11:56 Click on the Trusses
    00:11:56 Summary Data is different on all servers
    00:11:56 Framing Data are the same for Beta, Test, and Production
    00:11:57 Sheathing Data are the same for Beta, Test, and Production
    00:11:57 Trim Data is different on all servers
    00:11:57 Door & Windows Data are the same for Beta, Test, and Production
    00:11:57 Trusses Data are the same for Beta, Test, and Production
    00:11:57 Test FailMultiple failures or warnings in test: 1) Summary Data is different on all servers 2) Trim Data is different on all servers
    00:11:57 base64-img
  • Girt Outside Corners Job

    0h:2m:7s+563ms

    00:12:01 AM
    Girt Outside Corners Job
    2024-12-20 00:12:01 2024-12-20 00:14:08 0h:2m:7s+563ms
    Status Timestamp Details
    00:12:06 Login to AUTOTEST_PHTEST Distributor for Test Environment
    00:12:37 Click on the 'job review button' tab
    00:12:38 Click on the Summary
    00:12:40 Click on the Framing
    00:12:41 Click on the Sheathing
    00:12:43 Click on the Trim
    00:12:44 Click on the Trusses
    00:12:51 Login to AUTOTEST_PHTEST Distributor for Beta Environment
    00:13:17 Click on the 'job review button' tab
    00:13:19 Click on the Summary
    00:13:20 Click on the Framing
    00:13:22 Click on the Sheathing
    00:13:23 Click on the Trim
    00:13:25 Click on the Trusses
    00:13:30 Login to AUTOTEST_PHTEST Distributor for Production Environment
    00:13:59 Click on the 'job review button' tab
    00:14:01 Click on the Summary
    00:14:02 Click on the Framing
    00:14:04 Click on the Sheathing
    00:14:05 Click on the Trim
    00:14:07 Click on the Trusses
    00:14:07 Summary Data are the same for Beta, Test, and Production
    00:14:07 Framing Data are the same for Beta, Test, and Production
    00:14:08 Sheathing Data are the same for Beta, Test, and Production
    00:14:08 Trim Data are the same for Beta, Test, and Production
    00:14:08 Trusses Data are the same for Beta, Test, and Production
    00:14:08 Test Pass
  • Girt Outside Post Job

    0h:2m:16s+266ms

    00:14:13 AM
    Girt Outside Post Job
    2024-12-20 00:14:13 2024-12-20 00:16:29 0h:2m:16s+266ms
    Status Timestamp Details
    00:14:17 Login to AUTOTEST_PHTEST Distributor for Test Environment
    00:14:44 Click on the 'job review button' tab
    00:14:46 Click on the Summary
    00:14:47 Click on the Framing
    00:14:49 Click on the Sheathing
    00:14:50 Click on the Trim
    00:14:52 Click on the Trusses
    00:14:58 Login to AUTOTEST_PHTEST Distributor for Beta Environment
    00:15:27 Click on the 'job review button' tab
    00:15:28 Click on the Summary
    00:15:30 Click on the Framing
    00:15:31 Click on the Sheathing
    00:15:33 Click on the Trim
    00:15:35 Click on the Trusses
    00:15:40 Login to AUTOTEST_PHTEST Distributor for Production Environment
    00:16:20 Click on the 'job review button' tab
    00:16:22 Click on the Summary
    00:16:23 Click on the Framing
    00:16:25 Click on the Sheathing
    00:16:26 Click on the Trim
    00:16:28 Click on the Trusses
    00:16:28 Summary Data are the same for Production, Beta, and Different for Test
    00:16:28 Framing Data are the same for Production, Beta, and Different for Test
    00:16:29 Sheathing Data are the same for Beta, Test, and Production
    00:16:29 Trim Data are the same for Beta, Test, and Production
    00:16:29 Trusses Data are the same for Beta, Test, and Production
    00:16:29 Test FailMultiple failures or warnings in test: 1) Summary Data are the same for Production, Beta, and Different for Test 2) Framing Data are the same for Production, Beta, and Different for Test
    00:16:29 base64-img
  • Stud Frame 30x60 Job

    0h:2m:46s+078ms

    00:16:32 AM
    Stud Frame 30x60 Job
    2024-12-20 00:16:32 2024-12-20 00:19:19 0h:2m:46s+078ms
    Status Timestamp Details
    00:16:38 Login to AUTOTEST_PHTEST Distributor for Test Environment
    00:17:14 Click on the 'job review button' tab
    00:17:16 Click on the Summary
    00:17:17 Click on the Framing
    00:17:19 Click on the Sheathing
    00:17:21 Click on the Trim
    00:17:22 Click on the Doors & Windows
    00:17:24 Click on the Trusses
    00:17:40 Login to AUTOTEST_PHTEST Distributor for Beta Environment
    00:18:13 Click on the 'job review button' tab
    00:18:15 Click on the Summary
    00:18:16 Click on the Framing
    00:18:18 Click on the Sheathing
    00:18:20 Click on the Trim
    00:18:21 Click on the Doors & Windows
    00:18:23 Click on the Trusses
    00:18:29 Login to AUTOTEST_PHTEST Distributor for Production Environment
    00:19:08 Click on the 'job review button' tab
    00:19:09 Click on the Summary
    00:19:11 Click on the Framing
    00:19:12 Click on the Sheathing
    00:19:14 Click on the Trim
    00:19:16 Click on the Doors & Windows
    00:19:17 Click on the Trusses
    00:19:17 Summary Data are the same for Beta, Test, and Production
    00:19:18 Framing Data are the same for Beta, Test, and Production
    00:19:18 Sheathing Data are the same for Beta, Test, and Production
    00:19:18 Trim Data are the same for Production, Beta, and Different for Test
    00:19:18 Door & Windows Data are the same for Beta, Test, and Production
    00:19:18 Trusses Data are the same for Beta, Test, and Production
    00:19:18 Test FailTrim Data are the same for Production, Beta, and Different for Test
    00:19:19 base64-img
  • Cant Porch Attached Building Job

    0h:2m:48s+886ms

    00:19:22 AM
    Cant Porch Attached Building Job
    2024-12-20 00:19:22 2024-12-20 00:22:11 0h:2m:48s+886ms
    Status Timestamp Details
    00:19:30 Login to AUTOTEST_PHTEST Distributor for Test Environment
    00:20:26 Click on the 'job review button' tab
    00:20:28 Click on the Summary
    00:20:29 Click on the Framing
    00:20:31 Click on the Sheathing
    00:20:32 Click on the Trim
    00:20:34 Click on the Doors & Windows
    00:20:35 Click on the Trusses
    00:20:40 Login to AUTOTEST_PHTEST Distributor for Beta Environment
    00:21:10 Click on the 'job review button' tab
    00:21:12 Click on the Summary
    00:21:13 Click on the Framing
    00:21:15 Click on the Sheathing
    00:21:16 Click on the Trim
    00:21:18 Click on the Doors & Windows
    00:21:19 Click on the Trusses
    00:21:24 Login to AUTOTEST_PHTEST Distributor for Production Environment
    00:22:01 Click on the 'job review button' tab
    00:22:02 Click on the Summary
    00:22:03 Click on the Framing
    00:22:05 Click on the Sheathing
    00:22:07 Click on the Trim
    00:22:08 Click on the Doors & Windows
    00:22:10 Click on the Trusses
    00:22:10 Summary Data are the same for Beta, Test, and Production
    00:22:10 Framing Data are the same for Beta, Test, and Production
    00:22:10 Sheathing Data are the same for Beta, Test, and Production
    00:22:11 Trim Data are the same for Beta, Test, and Production
    00:22:11 Door & Windows Data are the same for Beta, Test, and Production
    00:22:11 Trusses Data are the same for Beta, Test, and Production
    00:22:11 Test Pass
  • Advanced Edit Job

    0h:3m:7s+120ms

    00:22:16 AM
    Advanced Edit Job
    2024-12-20 00:22:16 2024-12-20 00:25:23 0h:3m:7s+120ms
    Status Timestamp Details
    00:22:20 Login to AUTOTEST_PHTEST Distributor for Test Environment
    00:23:08 Click on the 'job review button' tab
    00:23:09 Click on the Summary
    00:23:10 Click on the Framing
    00:23:12 Click on the Sheathing
    00:23:14 Click on the Trim
    00:23:16 Click on the Doors & Windows
    00:23:18 Click on the Trusses
    00:23:35 Login to AUTOTEST_PHTEST Distributor for Beta Environment
    00:24:15 Click on the 'job review button' tab
    00:24:16 Click on the Summary
    00:24:18 Click on the Framing
    00:24:20 Click on the Sheathing
    00:24:21 Click on the Trim
    00:24:23 Click on the Doors & Windows
    00:24:25 Click on the Trusses
    00:24:29 Login to AUTOTEST_PHTEST Distributor for Production Environment
    00:25:12 Click on the 'job review button' tab
    00:25:13 Click on the Summary
    00:25:15 Click on the Framing
    00:25:17 Click on the Sheathing
    00:25:18 Click on the Trim
    00:25:20 Click on the Doors & Windows
    00:25:22 Click on the Trusses
    00:25:22 Summary Data is different on all servers
    00:25:22 Framing Data are the same for Production, Beta, and Different for Test
    00:25:22 Sheathing Data are the same for Beta, Test, and Production
    00:25:23 Trim Data is different on all servers
    00:25:23 Door & Windows Data are the same for Beta, Test, and Production
    00:25:23 Trusses Data are the same for Beta, Test, and Production
    00:25:23 Test FailMultiple failures or warnings in test: 1) Summary Data is different on all servers 2) Framing Data are the same for Production, Beta, and Different for Test 3) Trim Data is different on all servers
    00:25:23 base64-img
  • Parallel Steel Trusses Job

    0h:2m:18s+882ms

    00:25:29 AM
    Parallel Steel Trusses Job
    2024-12-20 00:25:29 2024-12-20 00:27:47 0h:2m:18s+882ms
    Status Timestamp Details
    00:25:32 Login to AUTOTEST_PHTEST Distributor for Test Environment
    00:26:04 Click on the 'job review button' tab
    00:26:05 Click on the Summary
    00:26:06 Click on the Framing
    00:26:08 Click on the Sheathing
    00:26:09 Click on the Trim
    00:26:11 Click on the Doors & Windows
    00:26:13 Click on the Trusses
    00:26:27 Login to AUTOTEST_PHTEST Distributor for Beta Environment
    00:26:53 Click on the 'job review button' tab
    00:26:54 Click on the Summary
    00:26:55 Click on the Framing
    00:26:57 Click on the Sheathing
    00:26:59 Click on the Trim
    00:27:00 Click on the Doors & Windows
    00:27:02 Click on the Trusses
    00:27:07 Login to AUTOTEST_PHTEST Distributor for Production Environment
    00:27:37 Click on the 'job review button' tab
    00:27:38 Click on the Summary
    00:27:40 Click on the Framing
    00:27:41 Click on the Sheathing
    00:27:43 Click on the Trim
    00:27:44 Click on the Doors & Windows
    00:27:46 Click on the Trusses
    00:27:46 Summary Data are the same for Production, Beta, and Different for Test
    00:27:46 Framing Data are the same for Production, Beta, and Different for Test
    00:27:47 Sheathing Data are the same for Beta, Test, and Production
    00:27:47 Trim Data are the same for Production, Beta, and Different for Test
    00:27:47 Door & Windows Data are the same for Test, Beta, and Different for Production
    00:27:47 Trusses Data are the same for Production, Beta, and Different for Test
    00:27:47 Test FailMultiple failures or warnings in test: 1) Summary Data are the same for Production, Beta, and Different for Test 2) Framing Data are the same for Production, Beta, and Different for Test 3) Trim Data are the same for Production, Beta, and Different for Test 4) Door & Windows Data are the same for Test, Beta, and Different for Production 5) Trusses Data are the same for Production, Beta, and Different for Test
    00:27:47 base64-img
  • Barndominium Job

    0h:3m:0s+881ms

    00:27:53 AM
    Barndominium Job
    2024-12-20 00:27:53 2024-12-20 00:30:54 0h:3m:0s+881ms
    Status Timestamp Details
    00:27:57 Login to AUTOTEST_PHTEST Distributor for Test Environment
    00:28:44 Click on the 'job review button' tab
    00:28:46 Click on the Summary
    00:28:47 Click on the Framing
    00:28:49 Click on the Sheathing
    00:28:51 Click on the Trim
    00:28:53 Click on the Doors & Windows
    00:28:54 Click on the Trusses
    00:29:00 Login to AUTOTEST_PHTEST Distributor for Beta Environment
    00:29:43 Click on the 'job review button' tab
    00:29:44 Click on the Summary
    00:29:46 Click on the Framing
    00:29:47 Click on the Sheathing
    00:29:49 Click on the Trim
    00:29:51 Click on the Doors & Windows
    00:29:52 Click on the Trusses
    00:29:58 Login to AUTOTEST_PHTEST Distributor for Production Environment
    00:30:42 Click on the 'job review button' tab
    00:30:44 Click on the Summary
    00:30:45 Click on the Framing
    00:30:47 Click on the Sheathing
    00:30:49 Click on the Trim
    00:30:50 Click on the Doors & Windows
    00:30:52 Click on the Trusses
    00:30:52 Summary Data is different on all servers
    00:30:52 Framing Data are the same for Production, Beta, and Different for Test
    00:30:52 Sheathing Data are the same for Beta, Test, and Production
    00:30:53 Trim Data are the same for Test, Beta, and Different for Production
    00:30:53 Door & Windows Data are the same for Production, Beta, and Different for Test
    00:30:53 Trusses Data are the same for Beta, Test, and Production
    00:30:54 Test FailMultiple failures or warnings in test: 1) Summary Data is different on all servers 2) Framing Data are the same for Production, Beta, and Different for Test 3) Trim Data are the same for Test, Beta, and Different for Production 4) Door & Windows Data are the same for Production, Beta, and Different for Test
    00:30:54 base64-img
  • Override Default Links

    0h:2m:39s+465ms

    00:31:17 AM
    Override Default Links
    2024-12-20 00:31:17 2024-12-20 00:33:57 0h:2m:39s+465ms
    Status Timestamp Details
    00:31:17 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    00:31:18 Click on th setting button
    00:31:22 Navigate to the customize page
    00:31:22 Enter Home field https://www.google.com/
    00:31:22 Enter About field https://www.wikipedia.org/
    00:31:22 Enter ContactS field https://www.facebook.com/
    00:31:25 Click on the 'save button'
    00:31:51 Verify that click on the logo icon is redirected to the https://www.google.com/
    00:32:16 Verify that click on the about button is redirected to the https://www.google.com/
    00:32:40 Verify that click on the contact button is redirected to the https://www.google.com/
    00:32:41 Click on th setting button
    00:32:44 Navigate to the customize page
    00:32:44 Clear data from the Home, About, and Contact field
    00:32:47 Click on the 'save button'
    00:33:10 Verify that click on the logo icon is redirected to the https://smartbuildsystems.com/
    00:33:33 Verify that click on the about button is redirected to the https://smartbuildsystems.com/
    00:33:57 Verify that click on the contact button is redirected to the https://smartbuildsystems.com/
    00:33:57 Test Pass
  • Provide option to output a document template as a PDF

    0h:3m:8s+390ms

    00:34:19 AM
    Provide option to output a document template as a PDF
    2024-12-20 00:34:19 2024-12-20 00:37:28 0h:3m:8s+390ms
    Status Timestamp Details
    00:34:19 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    00:34:21 Click on th setting button
    00:34:23 Navigate to the materials page
    00:34:27 Click on the 'add button' tab
    00:34:28 Enter TestDocumentTemplate in the description field
    00:34:32 Select Document Template from the type dropdown
    00:34:32 Upload the Document Template.docx
    00:34:40 Select PDF section from the output type dropdown
    00:34:41 Click on the 'Save' button
    00:34:43 Click on the 'Main Save' button
    00:35:01 Click on the start from scratch
    00:35:13 Click on the 'job button' tab
    00:35:14 Enter Document PDF Test in the job name field
    00:35:41 Click on the save button
    00:35:43 Click on the outputs button
    00:35:45 Check the Summary Sheet checkbox
    00:35:46 Check the TestDocumentTemplate checkbox
    00:36:20 Click on the download button
    00:36:27 Verify PDF File is download
    00:36:47 Verify that the new Document template has been merged with the pdf file. Also verify that the data mentioned in the document template file matches that of the pdf file.
    00:36:50 Click on the 'home button'
    00:36:51 Click on th setting button
    00:36:52 Navigate to the materials page
    00:37:04 Delete TestDocumentTemplate from outputs table
    00:37:05 Click on the 'Main Save' button
    00:37:12 Click on the job tab
    00:37:17 open Document PDF Test job
    00:37:19 Click on the Delete button
    00:37:21 Click on the yes button
    00:37:23 Confirm Deletion
    00:37:28 Test Pass
  • Edit Framing Color

    0h:6m:30s+501ms

    00:37:51 AM
    Edit Framing Color
    2024-12-20 00:37:51 2024-12-20 00:44:22 0h:6m:30s+501ms
    Status Timestamp Details
    00:37:51 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    00:37:52 Click on th setting button
    00:38:18 Navigate to the setup wizard
    00:38:20 Click on the 'Framing' tab
    00:38:43 Click on the add button
    00:38:44 Enter DefaultColorData in the sku input field
    00:38:45 Enter DefaultColorData in the description input field
    00:38:45 Enter 3.5 in the width input field
    00:38:46 Enter 13 in the depth input field
    00:38:50 Select (default) element from color dropdown
    00:38:55 Select Cee element from profile dropdown
    00:38:57 Select All element from usage table
    00:38:58 Enter the cost in the pricings table
    00:39:01 Enter the price in the pricings table
    00:39:06 Enter value in the Part Length
    00:39:07 Click on the save button
    00:39:09 Click on the add button
    00:39:10 Enter YellowPineColorData in the sku input field
    00:39:11 Enter YellowPineColorData in the description input field
    00:39:11 Enter 3.5 in the width input field
    00:39:12 Enter 13 in the depth input field
    00:39:16 Select Yellow Pine element from color dropdown
    00:39:21 Select Cee element from profile dropdown
    00:39:23 Select All element from usage table
    00:39:24 Enter the cost in the pricings table
    00:39:27 Enter the price in the pricings table
    00:39:32 Enter value in the Part Length
    00:39:32 Click on the save button
    00:39:34 Click on the add button
    00:39:36 Enter SpruceValueColorData in the sku input field
    00:39:36 Enter SpruceValueColorData in the description input field
    00:39:37 Enter 3.5 in the width input field
    00:39:37 Enter 13 in the depth input field
    00:39:42 Select Spruce element from color dropdown
    00:39:47 Select Cee element from profile dropdown
    00:39:49 Select All element from usage table
    00:39:50 Enter the cost in the pricings table
    00:39:53 Enter the price in the pricings table
    00:39:58 Enter value in the Part Length
    00:39:58 Click on the save button
    00:40:00 Click on the add button
    00:40:01 Enter TreatedLumberColorData in the sku input field
    00:40:02 Enter TreatedLumberColorData in the description input field
    00:40:02 Enter 3.5 in the width input field
    00:40:03 Enter 13 in the depth input field
    00:40:08 Select Engineered Lumber element from color dropdown
    00:40:12 Select Cee element from profile dropdown
    00:40:14 Select All element from usage table
    00:40:16 Enter the cost in the pricings table
    00:40:18 Enter the price in the pricings table
    00:40:23 Enter value in the Part Length
    00:40:24 Click on the save button
    00:40:25 Click on the add button
    00:40:27 Enter RedIronColorData in the sku input field
    00:40:27 Enter RedIronColorData in the description input field
    00:40:28 Enter 3.5 in the width input field
    00:40:28 Enter 13 in the depth input field
    00:40:33 Select Treated Lumber element from color dropdown
    00:40:38 Select Cee element from profile dropdown
    00:40:40 Select All element from usage table
    00:40:41 Enter the cost in the pricings table
    00:40:43 Enter the price in the pricings table
    00:40:49 Enter value in the Part Length
    00:40:49 Click on the save button
    00:40:51 Click on the add button
    00:40:52 Enter GrayIronColorData in the sku input field
    00:40:53 Enter GrayIronColorData in the description input field
    00:40:53 Enter 3.5 in the width input field
    00:40:54 Enter 13 in the depth input field
    00:40:58 Select Red Iron element from color dropdown
    00:41:03 Select Cee element from profile dropdown
    00:41:05 Select All element from usage table
    00:41:06 Enter the cost in the pricings table
    00:41:09 Enter the price in the pricings table
    00:41:14 Enter value in the Part Length
    00:41:15 Click on the save button
    00:41:32 Save the Data in the Setup Wizard
    00:41:33 Click on th setting button
    00:42:02 Navigate to the setup wizard
    00:42:04 Click on the 'Framing' tab
    00:42:14 Click on the download button and download excel file
    00:42:15 Verify that Added Colors are shown in the XLSX file
    00:42:15 Verify that Added Colors are shown in the XLSX file
    00:42:15 Verify that Added Colors are shown in the XLSX file
    00:42:15 Verify that Added Colors are shown in the XLSX file
    00:42:15 Verify that Added Colors are shown in the XLSX file
    00:42:15 Verify that Added Colors are shown in the XLSX file
    00:42:27 Delete DefaultColorData data from setup wizard
    00:42:39 Delete YellowPineColorData data from setup wizard
    00:42:50 Delete SpruceValueColorData data from setup wizard
    00:43:02 Delete TreatedLumberColorData data from setup wizard
    00:43:14 Delete RedIronColorData data from setup wizard
    00:43:25 Delete GrayIronColorData data from setup wizard
    00:43:54 Save the Data in the Setup Wizard
    00:43:55 Click on th setting button
    00:44:20 Navigate to the setup wizard
    00:44:22 Click on the 'Framing' tab
    00:44:22 Test Pass
  • Edit Framing Profile

    0h:6m:10s+307ms

    00:44:46 AM
    Edit Framing Profile
    2024-12-20 00:44:46 2024-12-20 00:50:56 0h:6m:10s+307ms
    Status Timestamp Details
    00:44:46 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    00:44:47 Click on th setting button
    00:45:13 Navigate to the setup wizard
    00:45:14 Click on the 'Framing' tab
    00:45:37 Click on the add button
    00:45:39 Enter DefaultProfileData in the sku input field
    00:45:39 Enter DefaultProfileData in the description input field
    00:45:40 Enter 3.5 in the width input field
    00:45:40 Enter 13 in the depth input field
    00:45:44 Select Spruce element from color dropdown
    00:45:48 Select Dimension Lumber element from profile dropdown
    00:45:50 Select All element from usage table
    00:45:51 Enter the cost in the pricings table
    00:45:53 Enter the price in the pricings table
    00:45:58 Enter value in the Part Length
    00:45:58 Click on the save button
    00:46:00 Click on the add button
    00:46:02 Enter YellowPineProfileData in the sku input field
    00:46:02 Enter YellowPineProfileData in the description input field
    00:46:03 Enter 3.5 in the width input field
    00:46:03 Enter 13 in the depth input field
    00:46:07 Select Spruce element from color dropdown
    00:46:11 Select Cee element from profile dropdown
    00:46:12 Select All element from usage table
    00:46:14 Enter the cost in the pricings table
    00:46:16 Enter the price in the pricings table
    00:46:21 Enter value in the Part Length
    00:46:21 Click on the save button
    00:46:23 Click on the add button
    00:46:24 Enter SpruceValueProfileData in the sku input field
    00:46:25 Enter SpruceValueProfileData in the description input field
    00:46:25 Enter 3.5 in the width input field
    00:46:25 Enter 13 in the depth input field
    00:46:29 Select Spruce element from color dropdown
    00:46:33 Select Zee element from profile dropdown
    00:46:35 Select All element from usage table
    00:46:36 Enter the cost in the pricings table
    00:46:38 Enter the price in the pricings table
    00:46:43 Enter value in the Part Length
    00:46:43 Click on the save button
    00:46:45 Click on the add button
    00:46:47 Enter TreatedLumberProfileData in the sku input field
    00:46:47 Enter TreatedLumberProfileData in the description input field
    00:46:48 Enter 3.5 in the width input field
    00:46:48 Enter 13 in the depth input field
    00:46:52 Select Spruce element from color dropdown
    00:46:56 Select Zee (Rotated) element from profile dropdown
    00:46:58 Select All element from usage table
    00:46:59 Enter the cost in the pricings table
    00:47:01 Enter the price in the pricings table
    00:47:06 Enter value in the Part Length
    00:47:06 Click on the save button
    00:47:08 Click on the add button
    00:47:09 Enter RedIronProfileData in the sku input field
    00:47:10 Enter RedIronProfileData in the description input field
    00:47:10 Enter 3.5 in the width input field
    00:47:11 Enter 13 in the depth input field
    00:47:14 Select Spruce element from color dropdown
    00:47:18 Select I Beam element from profile dropdown
    00:47:20 Select All element from usage table
    00:47:21 Enter the cost in the pricings table
    00:47:24 Enter the price in the pricings table
    00:47:28 Enter value in the Part Length
    00:47:29 Click on the save button
    00:47:31 Click on the add button
    00:47:32 Enter GrayIronProfileData in the sku input field
    00:47:33 Enter GrayIronProfileData in the description input field
    00:47:33 Enter 3.5 in the width input field
    00:47:34 Enter 13 in the depth input field
    00:47:37 Select Spruce element from color dropdown
    00:47:41 Select Back To Back Cee element from profile dropdown
    00:47:43 Select All element from usage table
    00:47:44 Enter the cost in the pricings table
    00:47:47 Enter the price in the pricings table
    00:47:51 Enter value in the Part Length
    00:47:52 Click on the save button
    00:48:18 Save the Data in the Setup Wizard
    00:48:19 Click on th setting button
    00:48:44 Navigate to the setup wizard
    00:48:46 Click on the 'Framing' tab
    00:48:50 Click on the download button and download excel file
    00:48:50 Verify that Added Profile are shown are shown in the XLSX file
    00:48:50 Verify that Added Profile are shown are shown in the XLSX file
    00:48:50 Verify that Added Profile are shown are shown in the XLSX file
    00:48:50 Verify that Added Profile are shown are shown in the XLSX file
    00:48:50 Verify that Added Profile are shown are shown in the XLSX file
    00:48:50 Verify that Added Profile are shown are shown in the XLSX file
    00:49:02 Delete DefaultProfileData data from setup wizard
    00:49:13 Delete YellowPineProfileData data from setup wizard
    00:49:25 Delete SpruceValueProfileData data from setup wizard
    00:49:37 Delete TreatedLumberProfileData data from setup wizard
    00:49:49 Delete RedIronProfileData data from setup wizard
    00:50:00 Delete GrayIronProfileData data from setup wizard
    00:50:29 Save the Data in the Setup Wizard
    00:50:30 Click on th setting button
    00:50:55 Navigate to the setup wizard
    00:50:56 Click on the 'Framing' tab
    00:50:56 Test Pass
  • Auto Roof Margin Roof Panel Extensions

    0h:7m:2s+766ms

    00:51:20 AM
    Auto Roof Margin Roof Panel Extensions
    2024-12-20 00:51:20 2024-12-20 00:58:23 0h:7m:2s+766ms
    Status Timestamp Details
    00:51:20 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    00:51:22 Click on th setting button
    00:51:46 Navigate to the setup wizard
    00:51:48 Click on the 'Sheathing' tab
    00:51:53 Click on the add button
    00:51:54 Enter TestAutoRoofExtension in the sku input field
    00:51:55 Enter RoofExtensionTest in the description input field
    00:51:56 Enter 36 in the coverage width input field
    00:51:58 Enter 37.5 in the full width input field
    00:51:58 Enter 0.25 in the thickness input field
    00:52:00 Enter 36 in the maximum length input field
    00:52:01 Select All element from usage table
    00:52:03 Enter the cost in the pricings table
    00:52:05 Enter the price in the pricings table
    00:52:07 Click on the save button
    00:52:23 Save the Data in the Setup Wizard
    00:52:51 Click on the start from scratch
    00:53:07 Click on the ''details' tab'
    00:53:08 Click on the 'wall sheathing tab'
    00:53:14 Select RoofExtensionTest element from wall material dropdown
    00:53:15 Enter 0' in the Eave wall margin field
    00:53:16 Enter 0' in the round sheathing field
    00:53:26 Click on the 'Drawing' tab
    00:53:27 Click on the 'Sheathing Drawing EXT_1' tab'
    00:53:38 Click on the 'job button' tab
    00:53:38 Enter AutoRoofExtension in the job name field
    00:54:03 Click on the save button
    00:54:26 Navigate to Setup Wizard
    00:54:28 Click on the 'Sheathing' tab
    00:54:33 RoofExtensionTest search in the table and click on the edit button
    00:54:34 Enter 6' in the extension input field
    00:54:34 Click on the save button
    00:55:01 Save the Data in the Setup Wizard
    00:55:04 Click on the job tab
    00:55:14 open AutoRoofExtension job
    00:55:42 Click on the 'Drawing' tab
    00:55:43 Click on the 'Sheathing Drawing EXT_1' tab'
    00:55:43 After setting the Extension to 6, verify that the exterior wall length increases by 6 inches.(13' 8 5/16" and 14' 2 5/16" is 0 feet (6 inches)).
    00:55:45 Click on the ''details' tab'
    00:55:47 Click on the 'wall sheathing tab'
    00:55:50 Enter 3" in the Eave wall margin field
    00:56:02 After setting the Eave Wall Margin to 3”, verify that the exterior wall length increases by 6 inches..(14' 2 5/16" and 14' 5 5/16" is 0 feet (9 inches)).
    00:56:03 Enter 1" in the round sheathing field
    00:56:14 Verify that the ExteriorWall parts are rounded up 14' 6" to the next inch, After setting the Round Sheathing is 1”.
    00:56:21 Click on the job tab
    00:56:26 open AutoRoofExtension job
    00:56:28 Click on the Delete button
    00:56:29 Click on the yes button
    00:56:31 Confirm Deletion
    00:56:38 Click on th setting button
    00:57:03 Navigate to the setup wizard
    00:57:04 Click on the 'Sheathing' tab
    00:57:08 Click on the download button and download excel file
    00:57:13 The 'Extension' column is present in column 9 of Sheathing Material Excel file
    00:57:25 Delete RoofExtensionTest data from setup wizard
    00:57:41 Save the Data in the Setup Wizard
    00:57:42 Click on th setting button
    00:58:12 Navigate to the materials page
    00:58:22 Download the excel file
    00:58:23 Test FailSystem.IO.FileNotFoundException : Could not find document
    00:58:23 base64-img
  • Filter Assemblies

    0h:0m:59s+299ms

    00:58:48 AM
    Filter Assemblies
    2024-12-20 00:58:48 2024-12-20 00:59:47 0h:0m:59s+299ms
    Status Timestamp Details
    00:58:48 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    00:58:49 Click on th setting button
    00:59:14 Navigate to the setup wizard
    00:59:15 Click on the 'Colors' tab
    00:59:16 Click on the filter icon
    00:59:16 Filter Icon is Visible on Color Tab
    00:59:18 Click on 3 tab Shingle from the Filter lists
    00:59:20 Click on First row of Color Table
    00:59:20 Get the product System Table Data
    00:59:20 Selected the filter Icon Data is 3 tab Shingle The Filter icon data is shown in the Product System table 3 tab Shingle
    00:59:21 Click on the cancel button
    00:59:22 Click on the 'Sheathing Assemblies' tab
    00:59:22 Click on the filter icon
    00:59:22 Filter Icon is Visible on Sheathing Assemblies Tab
    00:59:25 Click on 3 tab Shingle from the Filter lists
    00:59:27 Click on The First Row Of Sheathing Assemblies Table
    00:59:27 Click on the cancel button
    00:59:29 Click on the 'Sheathing' tab
    00:59:33 Owens Corning Dimensional Shingle search in the table and click on the edit button
    00:59:34 Get the Product System Table Data
    00:59:34 The product system that was applied in the Sheathing Assembly tab is shown to the user in the primary material
    00:59:34 Click on the cancel button
    00:59:35 Click on the 'Trim Assemblies' tab
    00:59:36 Click on the filter icon
    00:59:36 Filter Icon is Visible on Trim Assemblies Tab
    00:59:38 Click on 3 tab Shingle from the Filter lists
    00:59:40 Click on The First Row Of Sheathing Assemblies Table
    00:59:41 Click on the cancel button
    00:59:42 Click on the 'Trim' tab
    00:59:46 Interior Open Wall Base search in the table and click on the edit button
    00:59:47 Get the Product System Table Data
    00:59:47 The product system that was applied in the Trim Assembly tab is shown to the user in the primary material
    00:59:47 Click on the cancel button
    00:59:47 Test Pass
  • Gable post spacing issue

    0h:2m:43s+246ms

    01:00:12 AM
    Gable post spacing issue
    2024-12-20 01:00:12 2024-12-20 01:02:55 0h:2m:43s+246ms
    Status Timestamp Details
    01:00:12 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    01:00:29 Click on the start from scratch
    01:00:42 Click on the 'Building Size' tab
    01:00:43 Enter 50 in the width field
    01:00:43 Enter 30 in the length field
    01:00:44 Enter 6 in the ceiling height field
    01:00:46 Click on the ''details' tab'
    01:00:48 Click on the 'wall framing tab'
    01:00:52 Select 10' element from the gable post spacing dropdown
    01:00:55 Select Even element from the gable post placement dropdown
    01:01:06 Click on the 'job review button' tab
    01:01:07 Click on the 'Framing tab'
    01:01:07 Get Post quantity before changes 18
    01:01:09 Click on the 'Main Building Tab'
    01:01:11 Click on the 'Building Size' tab
    01:01:12 Enter 3 in the roof pitch field
    01:01:17 Get Post quantity after changes 18
    01:01:17 Verify that Post Quantity is the same as we get earlier: 18 == 18
    01:01:18 Enter 8 in the ceiling height field
    01:01:18 Ceiling Height is 8
    01:01:19 Enter 4 in the roof pitch field
    01:01:24 Get Post Quantity
    01:01:25 Enter 3 in the roof pitch field
    01:01:30 Get Post Quantity
    01:01:30 Verify that Post Quantity are same: 18 == 18
    01:01:31 Enter 10 in the ceiling height field
    01:01:31 Ceiling Height is 10
    01:01:31 Enter 4 in the roof pitch field
    01:01:37 Get Post Quantity
    01:01:37 Enter 3 in the roof pitch field
    01:01:43 Get Post Quantity
    01:01:43 Verify that Post Quantity are same: 18 == 18
    01:01:43 Enter 12 in the ceiling height field
    01:01:43 Ceiling Height is 12
    01:01:44 Enter 4 in the roof pitch field
    01:01:50 Get Post Quantity
    01:01:50 Enter 3 in the roof pitch field
    01:01:55 Get Post Quantity
    01:01:55 Verify that Post Quantity are same: 18 == 18
    01:01:56 Enter 13 in the ceiling height field
    01:01:56 Ceiling Height is 13
    01:01:57 Enter 4 in the roof pitch field
    01:02:01 Get Post Quantity
    01:02:02 Enter 3 in the roof pitch field
    01:02:07 Get Post Quantity
    01:02:07 Verify that Post Quantity are same: 18 == 18
    01:02:08 Enter 14 in the ceiling height field
    01:02:08 Ceiling Height is 14
    01:02:08 Enter 4 in the roof pitch field
    01:02:14 Get Post Quantity
    01:02:15 Enter 3 in the roof pitch field
    01:02:19 Get Post Quantity
    01:02:19 Verify that Post Quantity are same: 18 == 18
    01:02:20 Enter 15 in the ceiling height field
    01:02:20 Ceiling Height is 15
    01:02:21 Enter 4 in the roof pitch field
    01:02:26 Get Post Quantity
    01:02:27 Enter 3 in the roof pitch field
    01:02:31 Get Post Quantity
    01:02:31 Verify that Post Quantity are same: 18 == 18
    01:02:32 Enter 16 in the ceiling height field
    01:02:32 Ceiling Height is 16
    01:02:33 Enter 4 in the roof pitch field
    01:02:38 Get Post Quantity
    01:02:39 Enter 3 in the roof pitch field
    01:02:43 Get Post Quantity
    01:02:43 Verify that Post Quantity are same: 18 == 18
    01:02:44 Enter 18 in the ceiling height field
    01:02:44 Ceiling Height is 18
    01:02:45 Enter 4 in the roof pitch field
    01:02:49 Get Post Quantity
    01:02:50 Enter 3 in the roof pitch field
    01:02:55 Get Post Quantity
    01:02:55 Verify that Post Quantity are same: 18 == 18
    01:02:55 Test Pass
  • HOT PATCH - Wall Sheathing set to None is being reset

    0h:1m:10s+771ms

    01:03:16 AM
    HOT PATCH - Wall Sheathing set to None is being reset
    2024-12-20 01:03:16 2024-12-20 01:04:27 0h:1m:10s+771ms
    Status Timestamp Details
    01:03:27 Click on th setting button
    01:03:31 Navigate to the setup wizard
    01:03:33 Click on the 'Cladding' tab
    01:03:38 Click on the add button
    01:03:39 Enter CladdingMaterialTestData1 in the sku input field
    01:03:40 Enter CladdingMaterialTestData1 in the description input field
    01:03:41 Enter 1 in the coverage width input field
    01:03:43 Enter 1 in the full width input field
    01:03:43 Enter 0.25 in the thickness input field
    01:03:45 Enter 40 in the maximum length input field
    01:03:46 Enter 1 in the underlap length input field
    01:03:48 Select RoofCladdingMaterial element from system table
    01:03:50 Select Roof Cladding element from usage table
    01:03:52 Enter the cost in the pricings table
    01:03:54 Enter the price in the pricings table
    01:03:55 Click on the save button
    01:04:01 Save the Data in the Setup Wizard
    01:04:03 Click on the job tab
    01:04:14 open Job3 job
    01:04:26 Test Fail RoofCladdingMaterial is not shown in the dropdown Expected: False But was: True
    01:04:27 base64-img
  • Delete Setup Wizard Data

    0h:0m:39s+430ms

    01:04:32 AM
    Delete Setup Wizard Data
    2024-12-20 01:04:32 2024-12-20 01:05:11 0h:0m:39s+430ms
    Status Timestamp Details
    01:04:39 Click on th setting button
    01:04:43 Navigate to the setup wizard
    01:04:45 Click on the 'Cladding' tab
    01:04:56 Delete CladdingMaterialTestData1 data from setup wizard
    01:05:04 Save the Data in the Setup Wizard
    01:05:11 Test Pass
  • Smoke Test On Jobs Page

    0h:5m:51s+353ms

    01:05:55 AM
    Smoke Test On Jobs Page
    2024-12-20 01:05:55 2024-12-20 01:11:46 0h:5m:51s+353ms
    Status Timestamp Details
    01:05:55 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    01:06:12 Click on the start from scratch
    01:06:24 Click on the 'job button' tab
    01:06:25 Enter Quote Field Testing in the quoted field field
    01:06:26 Enter Quote Field Testing in the job name field
    01:06:50 Click on the save button
    01:06:53 Click on the 'home button'
    01:06:57 Navigate To Jobs Page
    01:07:14 Verify that the newly created job status is New
    01:07:14 Verify that the newly created job is open successfully.
    01:07:16 Click on the 'Make Quote' tab
    01:07:31 Click on the 'yes' button
    01:07:36 Navigate To Jobs Page
    01:07:54 Verify that the newly created job status is Quoted
    01:07:54 Verify that the newly created job is open successfully.
    01:07:55 Click on the 'Make Contract' tab
    01:08:03 Click on the 'yes' button
    01:08:07 Navigate To Jobs Page
    01:08:26 Verify that the newly created job status is Contracted
    01:08:26 Verify that the newly created job is open successfully.
    01:08:28 Click on the 'Prep for Order' tab
    01:08:34 Click on the 'yes' button
    01:08:39 Navigate To Jobs Page
    01:08:57 Verify that the newly created job status is OrderPrep
    01:08:57 Verify that the newly created job is open successfully.
    01:08:58 Click on the 'Make Order' tab
    01:09:06 Click on the 'yes' button
    01:09:10 Navigate To Jobs Page
    01:09:28 Verify that the newly created job status is Ordered
    01:09:28 Verify that the newly created job is open successfully.
    01:09:31 Navigate to Gmail account
    01:09:55 The user login to Gmail account successfully
    01:10:00 Click on the 'home button'
    01:11:16 Verify that the CSV file is downloaded
    01:11:46 Test Pass
  • Smoke Test On Pricing Page

    0h:2m:16s+327ms

    01:12:22 AM
    Smoke Test On Pricing Page
    2024-12-20 01:12:22 2024-12-20 01:14:38 0h:2m:16s+327ms
    Status Timestamp Details
    01:12:32 Click on th setting button
    01:12:36 Navigate to the setup wizard
    01:12:37 Click on the 'Cladding' tab
    01:12:38 Click on the Add icon
    01:12:38 Enter the Sku value for Test Cladding Material 1
    01:12:38 Enter the description value for Test Cladding Material 1
    01:12:38 Enter the coverage width value for Test Cladding Material 1
    01:12:39 Enter the full width value for Test Cladding Material 1
    01:12:39 Enter the thickness value for Test Cladding Material 1
    01:12:39 Enter the maximum length value for Test Cladding Material 1
    01:12:39 Enter the underlap length value for Test Cladding Material 1
    01:12:39 Choose the color map for Test Cladding Material 1
    01:12:39 Choose the bump map for Test Cladding Material 1
    01:12:41 Add Asphalt Shingle system
    01:12:45 Enter the cost in the pricings table
    01:12:50 Enter the price in the pricings table
    01:12:53 Click the part lengths pricing option
    01:12:53 Click the save button to add the material
    01:12:56 Click on the Add icon
    01:12:57 Enter the Sku value for Test Cladding Material 2
    01:12:57 Enter the description value for Test Cladding Material 2
    01:12:57 Enter the coverage width value for Test Cladding Material 2
    01:12:57 Enter the full width value for Test Cladding Material 2
    01:12:57 Enter the thickness value for Test Cladding Material 2
    01:12:57 Enter the maximum length value for Test Cladding Material 2
    01:12:57 Enter the underlap length value for Test Cladding Material 2
    01:12:57 Choose the color map for Test Cladding Material 2
    01:12:57 Choose the bump map for Test Cladding Material 2
    01:12:59 Add Asphalt Shingle system
    01:13:03 Enter the cost in the pricings table
    01:13:09 Enter the price in the pricings table
    01:13:11 Click the save button to add the material
    01:13:12 Click on the 'Connector' tab
    01:13:12 Click on the Add icon
    01:13:13 Enter the Sku value for connectors material
    01:13:13 Enter the description value for connectors material
    01:13:13 Enter the supplier id value for connectors material
    01:13:13 Enter the supplier sku value for connectors material
    01:13:13 Enter the cost for connectors material
    01:13:13 Enter the price for connectors material
    01:13:14 Click the save button to add the material
    01:13:15 Click on the 'Fasteners' tab
    01:13:15 Click on the Add icon
    01:13:16 Enter the Sku value for fasteners material
    01:13:16 Enter the description value for fasteners material
    01:13:16 Enter the supplier id value for fasteners material
    01:13:16 Enter the supplier sku value for fasteners material
    01:13:18 Enter the cost in the pricings table
    01:13:24 Enter the price in the pricings table
    01:13:24 Click the save button to add the material
    01:13:25 Click on the 'Freight' tab
    01:13:25 Click on the Add icon
    01:13:26 Enter the Sku value for hardware material
    01:13:26 Enter the description value for hardware material
    01:13:26 Enter the supplier id value for hardware material
    01:13:26 Enter the supplier sku value for hardware material
    01:13:26 Enter the supplier sku value for hardware material
    01:13:26 Enter the supplier sku value for hardware material
    01:13:27 Click the save button to add the material
    01:13:28 Click on the 'Labor' tab
    01:13:28 Click on the Add icon
    01:13:29 Enter the Sku value for labor material
    01:13:29 Enter the description value for labor material
    01:13:29 Enter the cost for labor material
    01:13:29 Enter the price for labor material
    01:13:29 Click the save button to add the material
    01:13:30 Click on the 'Freight' tab
    01:13:31 Click on the Add icon
    01:13:31 Enter the Sku value for freight material
    01:13:31 Enter the description value for freight material
    01:13:31 Enter the supplier id value for freight material
    01:13:31 Enter the supplier sku value for freight material
    01:13:32 Enter the packaging code value for freight material
    01:13:32 Enter the cost for freight material
    01:13:32 Enter the price for freight material
    01:13:32 Click the save button to add the material
    01:13:40 Save the Data in the Setup Wizard
    01:13:42 Navigate to the pricings page
    01:13:44 Enter the name of the material in the pricing table search box
    01:13:46 Verify Test Cladding Material 1 is present in the pricing table
    01:13:50 Enter the name of the material in the pricing table search box
    01:13:52 Verify Test Cladding Material 2 is present in the pricing table
    01:13:55 Click on the Hardware pricing page tab option
    01:13:57 Enter the name of the material in the pricing table search box
    01:13:59 Verify Test Hardware Material 1 is present in the pricing table
    01:14:01 Click on the Connector pricing page tab option
    01:14:02 Enter the name of the material in the pricing table search box
    01:14:04 Verify Test Connectors Material 1 is present in the pricing table
    01:14:06 Click on the Fastener pricing page tab option
    01:14:08 Enter the name of the material in the pricing table search box
    01:14:10 Verify Test Fasteners Material 1 is present in the pricing table
    01:14:13 Click on the Labor pricing page tab option
    01:14:15 Enter the name of the material in the pricing table search box
    01:14:17 Verify Test Labor Material 1 is present in the pricing table
    01:14:19 Click on the Freight pricing page tab option
    01:14:20 Enter the name of the material in the pricing table search box
    01:14:22 Verify Test Freight Material 1 is present in the pricing table
    01:14:25 Click the download button from the pricing table
    01:14:25 Select the XLSX option to download the excel file
    01:14:31 Verify that the XLSX file is downloaded
    01:14:31 Verify the new materials added are present in the excel file and verify the cost and price of the materials
    01:14:32 Click the download button from the pricing table
    01:14:33 Select the CSV option to download the excel file
    01:14:38 Verify that the CSV file is downloaded
    01:14:38 Test Cladding Material 1,Test Cladding Material 1,$30.00,$40.00,
    01:14:38 Test Cladding Material 2,Test Cladding Material 2,$10.00,$20.00,
    01:14:38 Test Labor Material 1,Test Labor Material 1,$20.00,$30.00,
    01:14:38 Test Hardware Material 1,Test Hardware Material 1,$30.00,$40.00,
    01:14:38 Test Connectors Material 1,Test Connectors Material 1,$50.00,$60.00,
    01:14:38 Test Fasteners Material 1,Test Fasteners Material 1,$10.00,$20.00,
    01:14:38 Test Freight Material 1,Test Freight Material 1,$20.00,$30.00,
    01:14:38 Verify the new materials added are present in the csv file
    01:14:38 Test Pass
  • Delete the Materials added

    0h:1m:51s+591ms

    01:14:41 AM
    Delete the Materials added
    2024-12-20 01:14:41 2024-12-20 01:16:33 0h:1m:51s+591ms
    Status Timestamp Details
    01:14:51 Click on th setting button
    01:14:55 Navigate to the setup wizard
    01:14:56 Click on the 'Cladding' tab
    01:15:08 Delete Test Cladding Material 1 data from setup wizard
    01:15:20 Delete Test Cladding Material 2 data from setup wizard
    01:15:21 Click on the 'Connector' tab
    01:15:33 Delete Test Connectors Material 1 data from setup wizard
    01:15:34 Click on the 'Fasteners' tab
    01:15:45 Delete Test Fasteners Material 1 data from setup wizard
    01:15:47 Click on the 'Freight' tab
    01:15:58 Delete Test Hardware Material 1 data from setup wizard
    01:16:00 Click on the 'Labor' tab
    01:16:11 Delete Test Labor Material 1 data from setup wizard
    01:16:13 Click on the 'Freight' tab
    01:16:24 Delete Test Freight Material 1 data from setup wizard
    01:16:33 Save the Data in the Setup Wizard
    01:16:33 Test Pass
  • RPS Metal Roofing Systems Contractor database

    0h:0m:34s+334ms

    01:17:08 AM
    RPS Metal Roofing Systems Contractor database
    2024-12-20 01:17:08 2024-12-20 01:17:42 0h:0m:34s+334ms
    Status Timestamp Details
    01:17:16 Click on the job tab
    01:17:29 open Job3 job
    01:17:42 Test Fail Super Pro 5V is not shown in the dropdown Expected: False But was: True
    01:17:42 base64-img
  • SetUp Wizard(Test case = 1)

    0h:2m:17s+352ms

    01:18:40 AM
    SetUp Wizard(Test case = 1)
    2024-12-20 01:18:40 2024-12-20 01:20:58 0h:2m:17s+352ms
    Status Timestamp Details
    01:18:40 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    01:18:42 Click on th setting button
    01:19:06 Navigate to the setup wizard
    01:19:08 Click on the 'Colors' tab
    01:19:13 Click on the 'Connector' tab
    01:19:17 Click on the 'Cupola Hardware' tab
    01:19:22 Click on the 'Cupolas' tab
    01:19:27 Click on the 'Fasteners' tab
    01:19:32 Click on the 'Foundation' tab
    01:19:37 Click on the 'Framing' tab
    01:19:42 Click on the 'Freight' tab
    01:19:47 Click on the 'Freight' tab
    01:19:52 Click on the 'Labor' tab
    01:19:57 Click on the 'Overhead Doors' tab
    01:20:02 Click on the 'Overhead Hardware' tab
    01:20:07 Click on the 'Sheathing' tab
    01:20:12 Click on the 'Slider Hardware' tab
    01:20:17 Click on the 'Slider' tab
    01:20:22 Click on the 'System' tab
    01:20:27 Click on the 'Trim' tab
    01:20:32 Click on the 'WalkDoors' tab
    01:20:37 Click on the 'WalkDoor Hardware' tab
    01:20:42 Click on the 'Window Hardware' tab
    01:20:47 Click on the 'Windows' tab
    01:20:52 Click on the 'Colors' tab
    01:20:53 Click on the add button
    01:20:54 Enter 0 in the color transparency input field
    01:20:56 Enter Colors1 in the color name field
    01:20:57 Select color from hex code
    01:20:57 Enter E06666 in the Color Code field
    01:20:58 Click on the save button
  • SetUp Wizard(Test case = 2)

    0h:0m:9s+982ms

    01:20:58 AM
    SetUp Wizard(Test case = 2)
    2024-12-20 01:20:58 2024-12-20 01:21:08 0h:0m:9s+982ms
    Status Timestamp Details
    01:20:58 Add Connectors
    01:20:59 Click on the 'Connector' tab
    01:21:01 Click on the add button
    01:21:02 Enter ConnectorMaterial in the sku input field
    01:21:03 Enter ConnectorMaterial in the description input field
    01:21:03 Enter 11 in the supplier Id input field
    01:21:04 Enter 1234 in the supplier sku input field
    01:21:04 Enter 12345 in the Packaging Code input field
    01:21:06 Enter 10 in the cost input field
    01:21:07 Enter 10 in the price input field
    01:21:08 Click on the save button
  • SetUp Wizard(Test case = 3)

    0h:0m:10s+042ms

    01:21:08 AM
    SetUp Wizard(Test case = 3)
    2024-12-20 01:21:08 2024-12-20 01:21:18 0h:0m:10s+042ms
    Status Timestamp Details
    01:21:08 Add Cupola Hardware
    01:21:09 Click on the 'Cupola Hardware' tab
    01:21:11 Click on the add button
    01:21:12 Enter CupolaHardwareMaterial in the sku input field
    01:21:13 Enter CupolaHardwareMaterial in the description input field
    01:21:13 Enter 11 in the supplier Id input field
    01:21:14 Enter 1234 in the supplier sku input field
    01:21:14 Enter 12345 in the Packaging Code input field
    01:21:16 Enter 10 in the cost input field
    01:21:17 Enter 10 in the price input field
    01:21:18 Click on the save button
  • SetUp Wizard(Test case = 4)

    0h:0m:13s+436ms

    01:21:18 AM
    SetUp Wizard(Test case = 4)
    2024-12-20 01:21:18 2024-12-20 01:21:31 0h:0m:13s+436ms
    Status Timestamp Details
    01:21:18 Add Cupolas
    01:21:19 Click on the 'Cupolas' tab
    01:21:21 Click on the add button
    01:21:23 Enter CupolasMaterial in the sku input field
    01:21:23 Enter CupolasMaterial in the description input field
    01:21:26 Enter 5 in the width input field
    01:21:26 Enter 5 in the roof pitch input field
    01:21:26 Enter 5 in the width input field
    01:21:27 Enter 11 in the supplier Id input field
    01:21:27 Enter 1234 in the supplier sku input field
    01:21:28 Enter 12345 in the Packaging Code input field
    01:21:29 Enter 10 in the cost input field
    01:21:31 Enter 10 in the price input field
    01:21:31 Click on the save button
  • SetUp Wizard(Test case = 5)

    0h:0m:6s+017ms

    01:21:31 AM
    SetUp Wizard(Test case = 5)
    2024-12-20 01:21:31 2024-12-20 01:21:37 0h:0m:6s+017ms
    Status Timestamp Details
    01:21:31 Add Fasteners
    01:21:33 Click on the 'Fasteners' tab
    01:21:34 Click on the add button
    01:21:35 Enter FastenersMaterial in the sku input field
    01:21:36 Enter FastenersMaterial in the description input field
    01:21:36 Enter 11 in the supplier Id input field
    01:21:37 Enter 1234 in the supplier sku input field
    01:21:37 Click on the save button
  • SetUp Wizard(Test case = 6)

    0h:0m:9s+945ms

    01:21:37 AM
    SetUp Wizard(Test case = 6)
    2024-12-20 01:21:37 2024-12-20 01:21:47 0h:0m:9s+945ms
    Status Timestamp Details
    01:21:37 Add Foundation
    01:21:39 Click on the 'Foundation' tab
    01:21:40 Click on the add button
    01:21:42 Enter FoundationMaterial in the sku input field
    01:21:42 Enter FoundationMaterial in the description input field
    01:21:43 Enter 11 in the supplier Id input field
    01:21:43 Enter 1234 in the supplier sku input field
    01:21:44 Enter 12345 in the Packaging Code input field
    01:21:45 Enter 10 in the cost input field
    01:21:47 Enter 10 in the price input field
    01:21:47 Click on the save button
  • SetUp Wizard(Test case = 7

    0h:0m:8s+129ms

    01:21:47 AM
    SetUp Wizard(Test case = 7
    2024-12-20 01:21:47 2024-12-20 01:21:55 0h:0m:8s+129ms
    Status Timestamp Details
    01:21:47 Add Framing
    01:21:49 Click on the 'Framing' tab
    01:21:50 Click on the add button
    01:21:52 Enter FramingMaterial in the sku input field
    01:21:52 Enter FramingMaterial in the description input field
    01:21:53 Enter 1 in the width input field
    01:21:53 Enter 1 in the depth input field
    01:21:54 Enter 11 in the supplier Id input field
    01:21:54 Enter 1234 in the supplier sku input field
    01:21:55 Enter 12345 in the Packaging Code input field
    01:21:55 Click on the save button
  • SetUp Wizard(Test case = 8)

    0h:0m:9s+469ms

    01:21:55 AM
    SetUp Wizard(Test case = 8)
    2024-12-20 01:21:55 2024-12-20 01:22:05 0h:0m:9s+469ms
    Status Timestamp Details
    01:21:55 Add Freight
    01:21:57 Click on the 'Freight' tab
    01:21:58 Click on the add button
    01:22:00 Enter FreightMaterial in the sku input field
    01:22:00 Enter FreightMaterial in the description input field
    01:22:00 Enter 11 in the supplier Id input field
    01:22:01 Enter 1234 in the supplier sku input field
    01:22:01 Enter 12345 in the Packaging Code input field
    01:22:03 Enter 10 in the cost input field
    01:22:04 Enter 10 in the price input field
    01:22:05 Click on the save button
  • SetUp Wizard(Test case = 9)

    0h:0m:9s+884ms

    01:22:05 AM
    SetUp Wizard(Test case = 9)
    2024-12-20 01:22:05 2024-12-20 01:22:15 0h:0m:9s+884ms
    Status Timestamp Details
    01:22:05 Add Hardware
    01:22:06 Click on the 'Freight' tab
    01:22:08 Click on the add button
    01:22:09 Enter HardwareMaterial in the sku input field
    01:22:10 Enter HardwareMaterial in the description input field
    01:22:10 Enter 11 in the supplier Id input field
    01:22:11 Enter 1234 in the supplier sku input field
    01:22:11 Enter 12345 in the Packaging Code input field
    01:22:13 Enter 10 in the cost input field
    01:22:14 Enter 10 in the price input field
    01:22:15 Click on the save button
  • SetUp Wizard(Test case = 10)

    0h:0m:9s+770ms

    01:22:15 AM
    SetUp Wizard(Test case = 10)
    2024-12-20 01:22:15 2024-12-20 01:22:24 0h:0m:9s+770ms
    Status Timestamp Details
    01:22:15 Add Labor
    01:22:16 Click on the 'Labor' tab
    01:22:18 Click on the add button
    01:22:19 Enter LaborMaterial in the sku input field
    01:22:20 Enter LaborMaterial in the description input field
    01:22:20 Enter 11 in the supplier Id input field
    01:22:21 Enter 1234 in the supplier sku input field
    01:22:21 Enter 12345 in the Packaging Code input field
    01:22:23 Enter 10 in the cost input field
    01:22:24 Enter 10 in the price input field
    01:22:24 Click on the save button
  • SetUp Wizard(Test case = 11)

    0h:0m:10s+855ms

    01:22:24 AM
    SetUp Wizard(Test case = 11)
    2024-12-20 01:22:24 2024-12-20 01:22:35 0h:0m:10s+855ms
    Status Timestamp Details
    01:22:24 Add OverHead Doors
    01:22:26 Click on the 'Overhead Doors' tab
    01:22:28 Click on the add button
    01:22:29 Enter OverHeadDoorMaterial in the sku input field
    01:22:30 Enter OverHeadDoorMaterial in the description input field
    01:22:30 Enter 1 in the width input field
    01:22:30 Enter 1 in the width input field
    01:22:31 Enter 11 in the supplier Id input field
    01:22:31 Enter 1234 in the supplier sku input field
    01:22:32 Enter 12345 in the Packaging Code input field
    01:22:33 Enter 10 in the cost input field
    01:22:35 Enter 10 in the price input field
    01:22:35 Click on the save button
  • SetUp Wizard(Test case = 12)

    0h:0m:9s+412ms

    01:22:35 AM
    SetUp Wizard(Test case = 12)
    2024-12-20 01:22:35 2024-12-20 01:22:45 0h:0m:9s+412ms
    Status Timestamp Details
    01:22:35 Add OverheadMaterial
    01:22:37 Click on the 'Overhead Hardware' tab
    01:22:38 Click on the add button
    01:22:39 Enter OverheadHardwareMaterial in the sku input field
    01:22:40 Enter OverheadHardwareMaterial in the description input field
    01:22:40 Enter 11 in the supplier Id input field
    01:22:41 Enter 1234 in the supplier sku input field
    01:22:41 Enter 12345 in the Packaging Code input field
    01:22:43 Enter 10 in the cost input field
    01:22:44 Enter 10 in the price input field
    01:22:45 Click on the save button
  • SetUp Wizard(Test case = 13)

    0h:0m:9s+999ms

    01:22:45 AM
    SetUp Wizard(Test case = 13)
    2024-12-20 01:22:45 2024-12-20 01:22:55 0h:0m:9s+999ms
    Status Timestamp Details
    01:22:45 Add Sheathing
    01:22:46 Click on the 'Sheathing' tab
    01:22:47 Click on the add button
    01:22:49 Enter SheathingMaterial in the sku input field
    01:22:49 Enter SheathingMaterial in the description input field
    01:22:51 Enter 1 in the coverage width input field
    01:22:52 Enter 1 in the full width input field
    01:22:53 Enter 1 in the thickness input field
    01:22:53 Enter 11 in the supplier Id input field
    01:22:54 Enter 1234 in the supplier sku input field
    01:22:54 Enter 12345 in the Packaging Code input field
    01:22:55 Click on the save button
  • SetUp Wizard(Test case = 14)

    0h:0m:9s+375ms

    01:22:55 AM
    SetUp Wizard(Test case = 14)
    2024-12-20 01:22:55 2024-12-20 01:23:04 0h:0m:9s+375ms
    Status Timestamp Details
    01:22:55 Add Slider Hardware
    01:22:56 Click on the 'Slider Hardware' tab
    01:22:57 Click on the add button
    01:22:59 Enter SliderHardwareMaterial in the sku input field
    01:22:59 Enter SliderHardwareMaterial in the description input field
    01:23:00 Enter 11 in the supplier Id input field
    01:23:00 Enter 1234 in the supplier sku input field
    01:23:01 Enter 12345 in the Packaging Code input field
    01:23:02 Enter 10 in the cost input field
    01:23:04 Enter 10 in the price input field
    01:23:04 Click on the save button
  • SetUp Wizard(Test case = 15)

    0h:0m:9s+927ms

    01:23:04 AM
    SetUp Wizard(Test case = 15)
    2024-12-20 01:23:04 2024-12-20 01:23:14 0h:0m:9s+927ms
    Status Timestamp Details
    01:23:04 Add Sliders
    01:23:05 Click on the 'Slider' tab
    01:23:07 Click on the add button
    01:23:08 Enter SliderMaterial in the sku input field
    01:23:09 Enter SliderMaterial in the description input field
    01:23:09 Enter 10 in the width input field
    01:23:10 Enter 11 in the supplier Id input field
    01:23:10 Enter 1234 in the supplier sku input field
    01:23:11 Enter 12345 in the Packaging Code input field
    01:23:12 Enter 10 in the cost input field
    01:23:13 Enter 10 in the price input field
    01:23:14 Click on the save button
  • SetUp Wizard(Test case = 16)

    0h:0m:4s+453ms

    01:23:14 AM
    SetUp Wizard(Test case = 16)
    2024-12-20 01:23:14 2024-12-20 01:23:18 0h:0m:4s+453ms
    Status Timestamp Details
    01:23:14 Add Systems
    01:23:15 Click on the 'System' tab
    01:23:17 Click on the add button
    01:23:18 Enter SystemsData in the description input field
    01:23:18 Enter SystemsData456 in the keys input field
    01:23:18 Click on the save button
  • SetUp Wizard(Test case = 17)

    0h:0m:8s+292ms

    01:23:18 AM
    SetUp Wizard(Test case = 17)
    2024-12-20 01:23:18 2024-12-20 01:23:27 0h:0m:8s+292ms
    Status Timestamp Details
    01:23:18 Add Trim
    01:23:20 Click on the 'Trim' tab
    01:23:22 Click on the add button
    01:23:23 Enter TrimMaterial in the sku input field
    01:23:24 Enter TrimMaterial in the description input field
    01:23:24 Enter 12 in the width input field
    01:23:25 Enter 12 in the width input field
    01:23:25 Enter 11 in the supplier Id input field
    01:23:26 Enter 1234 in the supplier sku input field
    01:23:26 Enter 12345 in the Packaging Code input field
    01:23:27 Click on the save button
  • SetUp Wizard(Test case = 19)

    0h:0m:10s+084ms

    01:23:27 AM
    SetUp Wizard(Test case = 19)
    2024-12-20 01:23:27 2024-12-20 01:23:37 0h:0m:10s+084ms
    Status Timestamp Details
    01:23:27 Add Walkdoor Hardware
    01:23:28 Click on the 'WalkDoor Hardware' tab
    01:23:30 Click on the add button
    01:23:31 Enter WalkdoorHardwareMaterial in the sku input field
    01:23:32 Enter WalkdoorHardwareMaterial in the description input field
    01:23:32 Enter 11 in the supplier Id input field
    01:23:33 Enter 1234 in the supplier sku input field
    01:23:33 Enter 12345 in the Packaging Code input field
    01:23:35 Enter 45 in the cost input field
    01:23:36 Enter 50 in the price input field
    01:23:37 Click on the save button
  • SetUp Wizard(Test case = 20)

    0h:0m:9s+988ms

    01:23:37 AM
    SetUp Wizard(Test case = 20)
    2024-12-20 01:23:37 2024-12-20 01:23:47 0h:0m:9s+988ms
    Status Timestamp Details
    01:23:37 Add Window Hardware
    01:23:38 Click on the 'Window Hardware' tab
    01:23:40 Click on the add button
    01:23:42 Enter WindowHardwareMaterial in the sku input field
    01:23:42 Enter WindowHardwareMaterial in the description input field
    01:23:43 Enter 11 in the supplier Id input field
    01:23:43 Enter 1234 in the supplier sku input field
    01:23:43 Enter 12345 in the Packaging Code input field
    01:23:45 Enter 45 in the cost input field
    01:23:46 Enter 50 in the price input field
    01:23:47 Click on the save button
  • SetUp Wizard(Test case = 21)

    0h:0m:10s+899ms

    01:23:47 AM
    SetUp Wizard(Test case = 21)
    2024-12-20 01:23:47 2024-12-20 01:23:58 0h:0m:10s+899ms
    Status Timestamp Details
    01:23:47 Add Windows
    01:23:48 Click on the 'Windows' tab
    01:23:50 Click on the add button
    01:23:52 Enter WindowMaterial in the sku input field
    01:23:52 Enter WindowMaterial in the description input field
    01:23:52 Enter 12 in the width input field
    01:23:53 Enter 12 in the width input field
    01:23:53 Enter 11 in the supplier Id input field
    01:23:54 Enter 1234 in the supplier sku input field
    01:23:54 Enter 12345 in the Packaging Code input field
    01:23:56 Enter 45 in the cost input field
    01:23:57 Enter 50 in the price input field
    01:23:58 Click on the save button
  • SetUp Wizard(Test case = 18)

    0h:10m:16s+478ms

    01:23:58 AM
    SetUp Wizard(Test case = 18)
    2024-12-20 01:23:58 2024-12-20 01:34:14 0h:10m:16s+478ms
    Status Timestamp Details
    01:23:58 Add Walkdoor
    01:23:59 Click on the 'WalkDoors' tab
    01:24:00 Click on the add button
    01:24:02 Enter WalkdoorMaterial in the sku input field
    01:24:02 Enter WalkdoorMaterial in the description input field
    01:24:03 Enter 5 in the width input field
    01:24:03 Enter 5 in the width input field
    01:24:04 Enter 11 in the supplier Id input field
    01:24:04 Enter 1234 in the supplier sku input field
    01:24:05 Enter 12345 in the Packaging Code input field
    01:24:05 Click on the save button
    01:34:14 Test FailOpenQA.Selenium.WebDriverTimeoutException : Timed out after 300 seconds
    01:34:14 base64-img
  • Delete Data

    0h:4m:49s+457ms

    01:34:24 AM
    Delete Data
    2024-12-20 01:34:24 2024-12-20 01:39:14 0h:4m:49s+457ms
    Status Timestamp Details
    01:34:24 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    01:34:25 Click on th setting button
    01:34:50 Navigate to the setup wizard
    01:34:52 Click on the 'Colors' tab
    01:35:03 Delete Colors1 data from setup wizard
    01:35:05 Click on the 'Connector' tab
    01:35:16 Delete ConnectorMaterial data from setup wizard
    01:35:18 Click on the 'Cupola Hardware' tab
    01:35:29 Delete CupolaHardwareMaterial data from setup wizard
    01:35:31 Click on the 'Cupolas' tab
    01:35:42 Delete CupolasMaterial data from setup wizard
    01:35:44 Click on the 'Fasteners' tab
    01:35:55 Delete FastenersMaterial data from setup wizard
    01:35:57 Click on the 'Foundation' tab
    01:36:08 Delete FoundationMaterial data from setup wizard
    01:36:10 Click on the 'Framing' tab
    01:36:21 Delete FramingMaterial data from setup wizard
    01:36:23 Click on the 'Freight' tab
    01:36:34 Delete FreightMaterial data from setup wizard
    01:36:36 Click on the 'Freight' tab
    01:36:47 Delete HardwareMaterial data from setup wizard
    01:36:49 Click on the 'Labor' tab
    01:37:00 Delete LaborMaterial data from setup wizard
    01:37:02 Click on the 'Overhead Doors' tab
    01:37:13 Delete OverHeadDoorMaterial data from setup wizard
    01:37:15 Click on the 'Overhead Hardware' tab
    01:37:26 Delete OverheadHardwareMaterial data from setup wizard
    01:37:28 Click on the 'Sheathing' tab
    01:37:39 Delete SheathingMaterial data from setup wizard
    01:37:41 Click on the 'Slider Hardware' tab
    01:37:52 Delete SliderHardwareMaterial data from setup wizard
    01:37:54 Click on the 'Slider' tab
    01:38:06 Delete SliderMaterial data from setup wizard
    01:38:07 Click on the 'System' tab
    01:38:12 Click on the 'Trim' tab
    01:38:24 Delete TrimMaterial data from setup wizard
    01:38:25 Click on the 'WalkDoors' tab
    01:38:30 Click on the 'WalkDoor Hardware' tab
    01:38:42 Delete WalkdoorHardwareMaterial data from setup wizard
    01:38:43 Click on the 'Window Hardware' tab
    01:38:55 Delete WindowHardwareMaterial data from setup wizard
    01:38:56 Click on the 'Windows' tab
    01:39:14 Save the Data in the Setup Wizard
    01:39:14 Test Pass
  • Smoke Test On Material Page

    0h:3m:36s+278ms

    01:40:03 AM
    Smoke Test On Material Page
    2024-12-20 01:40:03 2024-12-20 01:43:39 0h:3m:36s+278ms
    Status Timestamp Details
    01:40:15 Click on th setting button
    01:40:20 Navigate to the setup wizard
    01:40:21 Click on the 'Cladding' tab
    01:40:30 Click on the 'Trim' tab
    01:40:39 Click on the 'Fasteners' tab
    01:40:47 Click on the 'Connector' tab
    01:40:56 Click on the 'Freight' tab
    01:41:01 Click on the 'Labor' tab
    01:41:09 Click on the 'Freight' tab
    01:41:18 Click on the 'Cladding' tab
    01:41:19 Click on the add button
    01:41:21 Enter Test Cladding Material in the sku input field
    01:41:21 Enter Test Cladding Material in the description input field
    01:41:23 Enter 36 in the coverage width input field
    01:41:24 Enter 37.5 in the full width input field
    01:41:25 Enter 0.25 in the thickness input field
    01:41:26 Enter 50 in the maximum length input field
    01:41:28 Enter 5 in the underlap length input field
    01:41:30 Select Asphalt Shingle element from system table
    01:41:32 Select Roof Cladding element from usage table
    01:41:33 Enter the cost in the pricings table
    01:41:36 Enter the price in the pricings table
    01:41:36 Click the part lengths pricing option
    01:41:36 Click on the save button
    01:41:38 Click on the 'Trim' tab
    01:41:40 Click on the add button
    01:41:41 Enter Test Trim Material in the sku input field
    01:41:42 Enter Test Trim Material in the description input field
    01:41:42 Enter 1 in the width input field
    01:41:43 Enter 1 in the width input field
    01:41:45 Select Asphalt Shingle element from system table
    01:41:47 Select Ridge Cap element from usage table
    01:41:48 Enter the cost in the pricings table
    01:41:51 Enter the price in the pricings table
    01:41:51 Click on the save button
    01:41:52 Click on the 'Connector' tab
    01:41:54 Click on the add button
    01:41:55 Enter Test Connectors Material in the sku input field
    01:41:56 Enter Test Connectors Material in the description input field
    01:41:57 Enter 20 in the cost input field
    01:41:59 Enter 30 in the price input field
    01:41:59 Click on the save button
    01:42:00 Click on the 'Fasteners' tab
    01:42:02 Click on the add button
    01:42:03 Enter Test Fastener Material in the sku input field
    01:42:04 Enter Test Fastener Material in the description input field
    01:42:04 Enter 123 in the supplier Id input field
    01:42:06 Enter the cost in the pricings table
    01:42:08 Enter the price in the pricings table
    01:42:08 Click on the save button
    01:42:10 Click on the 'Freight' tab
    01:42:11 Click on the add button
    01:42:13 Enter Test Hardware Material in the sku input field
    01:42:13 Enter Test Hardware Material in the description input field
    01:42:14 Enter 123 in the supplier Id input field
    01:42:14 Enter 1456 in the supplier sku input field
    01:42:14 Click on the save button
    01:42:16 Click on the 'Labor' tab
    01:42:18 Click on the add button
    01:42:19 Enter Test Labor Material in the sku input field
    01:42:20 Enter Test Labor Material in the description input field
    01:42:21 Enter 20 in the cost input field
    01:42:22 Enter 30 in the price input field
    01:42:23 Click on the save button
    01:42:24 Click on the 'Freight' tab
    01:42:26 Click on the add button
    01:42:28 Enter Test Freight Material in the sku input field
    01:42:28 Enter Test Freight Material in the description input field
    01:42:30 Enter 20 in the cost input field
    01:42:31 Enter 30 in the price input field
    01:42:32 Enter 5420 in the supplier Id input field
    01:42:32 Enter 320 in the supplier sku input field
    01:42:32 Enter 8547 in the Packaging Code input field
    01:42:33 Click on the save button
    01:42:46 Save the Data in the Setup Wizard
    01:42:47 Click on th setting button
    01:42:49 Navigate to the materials page
    01:42:52 Click on the edit button to edit the details of the new cladding material added
    01:42:52 Edit the description of the new cladding material
    01:42:52 Edit the dimension 1 of the new cladding material
    01:42:52 Edit the dimension 2 of the new cladding material
    01:42:52 Edit the dimension 3 of the new cladding material
    01:42:52 Edit the maximum length of the new cladding material
    01:42:52 Edit the underlap length of the new cladding material
    01:42:53 Edit the orientation type of the new cladding material
    01:42:53 Edit the color map of the new cladding material
    01:42:53 Edit the color map size of the new cladding material
    01:42:54 Edit the color map offset of the new cladding material
    01:42:54 Edit the color map rotation of the new cladding material
    01:42:54 Edit the bump map of the new cladding material
    01:42:55 Edit the bump map size of the new cladding material
    01:42:55 Edit the bump map offset of the new cladding material
    01:42:56 Edit the bump map rotation of the new cladding material
    01:42:58 Click save button to save the changes made to the cladding material
    01:42:59 Click on the trim material page tab option
    01:43:01 Click on the edit button to edit the details of the new trim material added
    01:43:01 Edit the description of the new trim material
    01:43:01 Edit the dimension 1 of the new trim material
    01:43:01 Edit the dimension 2 of the new trim material
    01:43:02 Edit the maximum length of the new trim material
    01:43:02 Edit the underlap length of the new trim material
    01:43:03 Click save button to save the changes made to the trim material
    01:43:04 Click on the hardware material page tab option
    01:43:06 Click on the edit button to edit the details of the new hardware material added
    01:43:06 Edit the description of the new hardware material
    01:43:06 Edit the dimension 1 of the new hardware material
    01:43:06 Edit the dimension 2 of the new hardware material
    01:43:06 Edit the dimension 3 of the new hardware material
    01:43:06 Edit the maximum length of the new hardware material
    01:43:06 Edit the underlap length of the new hardware material
    01:43:08 Click save button to save the changes made to the hardware material
    01:43:10 Click on the cladding material page tab option
    01:43:10 Click on the edit button to edit the details of the new connector material added
    01:43:10 Edit the description of the new connector material
    01:43:11 Edit the dimension 1 of the new connector material
    01:43:11 Edit the dimension 2 of the new connector material
    01:43:11 Edit the dimension 3 of the new connector material
    01:43:11 Edit the maximum length of the new connector material
    01:43:11 Edit the underlap length of the new connector material
    01:43:13 Click save button to save the changes made to the connector material
    01:43:14 Click on the fastener material page tab option
    01:43:15 Click on the cladding material page tab option
    01:43:15 Click on the edit button to edit the details of the new fastener material added
    01:43:15 Edit the description of the new fastener material
    01:43:15 Edit the dimension 1 of the new fastener material
    01:43:15 Edit the dimension 2 of the new fastener material
    01:43:15 Edit the dimension 3 of the new fastener material
    01:43:16 Edit the maximum length of the new fastener material
    01:43:16 Edit the underlap length of the new fastener material
    01:43:17 Click save button to save the changes made to the fastener material
    01:43:18 Click on the cladding labor page tab option
    01:43:20 Click on the cladding material page tab option
    01:43:20 Click on the edit button to edit the details of the new labor material added
    01:43:20 Edit the description of the new labor material
    01:43:20 Edit the dimension 1 of the new labor material
    01:43:20 Edit the dimension 2 of the new labor material
    01:43:20 Edit the dimension 3 of the new labor material
    01:43:20 Edit the maximum length of the new labor material
    01:43:20 Edit the underlap length of the new labor material
    01:43:22 Click save button to save the changes made to the labor material
    01:43:23 Click on the freight material page tab option
    01:43:24 Click on the cladding material page tab option
    01:43:24 Click on the edit button to edit the details of the new freight material added
    01:43:24 Edit the description of the new freight material
    01:43:24 Edit the dimension 1 of the new freight material
    01:43:25 Edit the dimension 2 of the new freight material
    01:43:25 Edit the dimension 3 of the new freight material
    01:43:25 Edit the maximum length of the new freight material
    01:43:25 Edit the underlap length of the new freight material
    01:43:26 Click save button to save the changes made to the freight material
    01:43:27 Click the download button from the material table
    01:43:28 Select the XLSX option to download the excel file
    01:43:33 Verify that the XLSX file is downloaded
    01:43:33 Verify the new materials added are present in the excel file
    01:43:34 Click the download button from the material table
    01:43:34 Select the CSV option to download the excel file
    01:43:39 Verify that the CSV file is downloaded
    01:43:39 Verify the new materials added are present in the csv file
    01:43:39 Test Pass
  • Delete Data

    0h:2m:19s+294ms

    01:43:44 AM
    Delete Data
    2024-12-20 01:43:44 2024-12-20 01:46:03 0h:2m:19s+294ms
    Status Timestamp Details
    01:43:52 Click on th setting button
    01:43:57 Navigate to the setup wizard
    01:43:58 Click on the 'Cladding' tab
    01:44:10 Delete Test Cladding Material Data data from setup wizard
    01:44:15 Click on the 'Trim' tab
    01:44:26 Delete Test Trim Material Data data from setup wizard
    01:44:31 Click on the 'Fasteners' tab
    01:44:43 Delete Test Fastener Material Data data from setup wizard
    01:44:48 Click on the 'Connector' tab
    01:45:00 Delete Test Connectors Material Data data from setup wizard
    01:45:05 Click on the 'Freight' tab
    01:45:16 Delete Test Freight Material Data data from setup wizard
    01:45:18 Click on the 'Labor' tab
    01:45:29 Delete Test Labor Material Data data from setup wizard
    01:45:34 Click on the 'Freight' tab
    01:45:46 Delete Test Hardware Material Data data from setup wizard
    01:45:56 Save the Data in the Setup Wizard
    01:46:03 Test Pass
  • Smoke Test On Builders Page

    0h:2m:40s+148ms

    01:46:53 AM
    Smoke Test On Builders Page
    2024-12-20 01:46:53 2024-12-20 01:49:34 0h:2m:40s+148ms
    Status Timestamp Details
    01:46:53 Login To AUTOTEST_EAGLEVIEW Distributor
    01:47:03 Click on th setting button
    01:47:05 Navigate to the builder page
    01:47:06 Click on the 'Add New Builder button'
    01:47:07 Enter data in the Name Field
    01:47:07 Check all checkboxes of New create Builder Page
    01:47:11 Click on the Back to list button
    01:47:11 Verify that the page is redirect to the Distributor Page
    01:47:12 Click on th setting button
    01:47:14 Navigate to the builder page
    01:47:15 Click on the 'Add New Builder button'
    01:47:15 Enter data in the Name Field
    01:47:18 Click on the Create button
    01:47:21 Click on th setting button
    01:47:22 Navigate to the builder page
    01:47:23 Click on the 'Add New Builder button'
    01:47:24 Enter data in the Name Field
    01:47:26 Click on the Create button
    01:47:29 Click on th setting button
    01:47:30 Navigate to the builder page
    01:47:32 Click on the 'Add New Builder button'
    01:47:32 Enter data in the Name Field
    01:47:34 Click on the Create button
    01:47:37 Click on th setting button
    01:47:39 Navigate to the builder page
    01:47:43 Click on the Invite User button
    01:47:43 Enter Data in the Username
    01:47:43 Enter Data in the Company Address
    01:47:43 Enter Data in the Phone Number field
    01:47:43 Enter Data in the Phone Number field
    01:47:43 Change Billing Account
    01:47:45 Click on the Invite User button
    01:47:50 Click on the Job Button
    01:48:01 open Job3 job
    01:48:15 Click on the AUTOTEST_EAGLEVIEW BASE
    01:48:19 Click on the Yes button
    01:48:28 Click on the Test Kritika Builder-1 builder
    01:48:31 Click on the Test Kritika Builder-2 builder
    01:48:35 Click on the Yes button
    01:48:46 Click on the Test Kritika Builder-2 builder
    01:48:49 Click on the Test Kritika Builder-2 builder
    01:48:52 Click on the Yes button
    01:48:58 Verify that all builders are working
    01:49:00 Click on the Job list button
    01:49:02 Click on the No button
    01:49:05 Navigate to Gmail account
    01:49:05 Enter username
    01:49:11 Click on the next button
    01:49:13 Enter Password
    01:49:27 Click on the next button
    01:49:34 The user login to GMail account successfully
    01:49:34 Test Pass
  • Delete Builder

    0h:0m:56s+711ms

    01:49:37 AM
    Delete Builder
    2024-12-20 01:49:37 2024-12-20 01:50:34 0h:0m:56s+711ms
    Status Timestamp Details
    01:49:37 Login To AUTOTEST_EAGLEVIEW Distributor
    01:49:48 Click on th setting button
    01:49:49 Navigate to the builder page
    01:49:53 Click on the Delete button
    01:49:57 Click on the Yes button
    01:50:00 Click on th setting button
    01:50:01 Navigate to the builder page
    01:50:05 Click on the Delete button
    01:50:09 Click on the Yes button
    01:50:12 Click on th setting button
    01:50:13 Navigate to the builder page
    01:50:17 Click on the Delete button
    01:50:21 Click on the Yes button
    01:50:24 Click on th setting button
    01:50:25 Navigate to the builder page
    01:50:34 Test Pass
  • Show what's been overridden in Advanced Edit

    0h:2m:9s+997ms

    01:51:34 AM
    Show what's been overridden in Advanced Edit
    2024-12-20 01:51:34 2024-12-20 01:53:44 0h:2m:9s+997ms
    Status Timestamp Details
    01:51:34 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    01:51:52 Click on the start from scratch
    01:52:03 Click on the opening
    01:52:04 Click on the walkdoor
    01:52:06 Click on the Solid
    01:52:08 Click on the 3x7 LIS Solid Steel Door
    01:52:19 Click on the 'advanced edit tab'
    01:52:23 Click on the ''Canvas 3D View'' tab
    01:52:27 Click on the 'advanced edit tab'
    01:52:29 Click on the 'ROOF_2 tab'
    01:52:30 Click on the ''Product System' tab'
    01:52:32 Click on the 'EXT_1 tab'
    01:52:34 Verify that the panel is displayed in the advanced edit.
    01:52:36 Click on the ''details' tab'
    01:52:38 Click on the 'wall framing tab'
    01:52:41 Select Custom... element from the eave post placement dropdown
    01:52:54 Select Custom from the Eave Post Placement dropdown and Enter data in the Bay length field.
    01:52:56 Click on the 'Main Building Tab'
    01:52:57 Click on the 'Colors' tab
    01:52:58 Click on the 'wall color dropdown'
    01:53:01 Set BRIGHT RED on the wall color dropdown
    01:53:13 Click on the Pencil icon of EXT_1
    01:53:22 Verify that Wall color and Custom data shown in the overlay
    01:53:24 Click on the Reset All of overlay
    01:53:27 Click on the yes of Reset Overrides pop up
    01:53:39 Click on the ''Canvas 3D View'' tab
    01:53:44 Verify that all changes to the EXT_1 wall are set to default
    01:53:44 Test Pass
  • Primary Material for an Assembly crashes the system

    0h:6m:13s+384ms

    01:54:40 AM
    Primary Material for an Assembly crashes the system
    2024-12-20 01:54:40 2024-12-20 02:00:54 0h:6m:13s+384ms
    Status Timestamp Details
    01:54:40 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    01:54:42 Click on th setting button
    01:55:12 Navigate to the setup wizard
    01:55:13 Click on the 'Sheathing Assemblies' tab
    01:55:22 Click on the add button
    01:55:22 Enter TestBrick_bmp 2'x5' in the name input field
    01:55:26 Select 2'x5'TestDataMaterial from the primary dropdown
    01:55:28 Select All element from usage table
    01:55:29 Click on the save button
    01:55:29 Verify the system doesn't crash after adding SKU with '''
    01:55:31 Click on the add button
    01:55:32 Enter 2"x5"Wood LightTest in the name input field
    01:55:36 Select 2"x5"TestData from the primary dropdown
    01:55:38 Select All element from usage table
    01:55:39 Click on the save button
    01:55:39 Verify the system doesn't crash after adding SKU with '"'
    01:55:53 Save the Data in the Setup Wizard
    02:00:53 Test FailOpenQA.Selenium.WebDriverTimeoutException : Timed out after 300 seconds ----> OpenQA.Selenium.NoSuchElementException : no such element: Unable to locate element: {"method":"xpath","selector":"//a[normalize-space()='Start from Scratch']"} (Session info: chrome=131.0.6778.140); For documentation on this error, please visit: https://www.selenium.dev/documentation/webdriver/troubleshooting/errors#no-such-element-exception
    02:00:54 base64-img
  • Options from Packages price is incorrect

    0h:0m:12s+177ms

    02:01:50 AM
    Options from Packages price is incorrect
    2024-12-20 02:01:50 2024-12-20 02:02:03 0h:0m:12s+177ms
    Status Timestamp Details
    02:01:50 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    02:01:52 Click on th setting button
    02:01:54 Navigate to the job page
    02:01:55 Click on the add new button
    02:01:55 Click on the blank button
    02:01:57 Enter Group 1 in the group name field
    02:01:59 Enter Test 1 in the package name field
    02:02:02 Test Fail Option is not shown in the dropdown Expected: False But was: True
    02:02:03 base64-img
  • Delete

    0h:0m:14s+551ms

    02:02:11 AM
    Delete
    2024-12-20 02:02:11 2024-12-20 02:02:26 0h:0m:14s+551ms
    Status Timestamp Details
    02:02:11 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    02:02:12 Click on th setting button
    02:02:15 Navigate to the job page
    02:02:26 Click on the save button
    02:02:26 Test Pass
  • Changing Roof Pitch

    0h:1m:23s+870ms

    02:03:21 AM
    Changing Roof Pitch
    2024-12-20 02:03:21 2024-12-20 02:04:45 0h:1m:23s+870ms
    Status Timestamp Details
    02:03:21 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    02:03:23 Click on th setting button
    02:03:26 Navigate to the framing rules
    02:03:28 Click on the AUTOTEST_PHTEST framing rules edit button
    02:03:35 Enter 6 in the Roof pitch of Framing Rules
    02:03:44 Click on the save button
    02:03:45 Click on the AUTOTEST_PHTEST framing rules edit button
    02:03:51 Verified that changes in roof pitch are applied after clicking on the save button in framing rules
    02:03:53 Click on Home Button
    02:04:09 Click on the start from scratch
    02:04:20 Click on the 'Building Size' tab
    02:04:20 Get the Roof Pitch value in the Default Job
    02:04:20 Verified that the roof pitch is also updated in the default job
    02:04:21 Click on the 'home button'
    02:04:24 Click on the 'No button'
    02:04:25 Click on th setting button
    02:04:28 Navigate to the framing rules
    02:04:31 Click on the AUTOTEST_PHTEST framing rules edit button
    02:04:38 Enter 4 in the Roof pitch of Framing Rules
    02:04:45 Click on the save button
    02:04:45 Test Pass
  • Trachte - Header High Bar Joist

    0h:5m:53s+201ms

    02:05:41 AM
    Trachte - Header High Bar Joist
    2024-12-20 02:05:41 2024-12-20 02:11:34 0h:5m:53s+201ms
    Status Timestamp Details
    02:05:41 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    02:05:43 Click on th setting button
    02:06:07 Navigate to the setup wizard
    02:06:08 Click on the 'Framing' tab
    02:06:15 Click on the add button
    02:06:17 Enter Wood ` Trading` 0 ` 2X0-4 Test in the sku input field
    02:06:18 Enter Wood ` material ` Trading` 0 ` 2X0-4 Test in the description input field
    02:06:18 Enter 2 in the width input field
    02:06:19 Enter 6 in the depth input field
    02:06:21 Select Header High Material - Overhead Door Post Framing element from usage table
    02:06:21 Click on the save button
    02:11:34 Test FailOpenQA.Selenium.WebDriverTimeoutException : Timed out after 300 seconds
    02:11:34 base64-img
  • Delete Data

    0h:5m:44s+162ms

    02:11:44 AM
    Delete Data
    2024-12-20 02:11:44 2024-12-20 02:17:28 0h:5m:44s+162ms
    Status Timestamp Details
    02:11:44 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    02:11:45 Click on th setting button
    02:12:11 Navigate to the setup wizard
    02:12:12 Click on the 'Framing' tab
    02:17:28 Test FailOpenQA.Selenium.WebDriverTimeoutException : Timed out after 300 seconds ----> OpenQA.Selenium.NoSuchElementException : no such element: Unable to locate element: {"method":"xpath","selector":"//div[@id='w2ui-popup']//button[@onclick='w2popup.close();']"} (Session info: chrome=131.0.6778.140); For documentation on this error, please visit: https://www.selenium.dev/documentation/webdriver/troubleshooting/errors#no-such-element-exception
    02:17:28 base64-img
  • Invalid HEX Code

    0h:1m:48s+141ms

    02:18:28 AM
    Invalid HEX Code
    2024-12-20 02:18:28 2024-12-20 02:20:16 0h:1m:48s+141ms
    Status Timestamp Details
    02:18:28 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    02:18:29 Click on th setting button
    02:18:55 Navigate to the setup wizard
    02:18:56 Click on the 'Colors' tab
    02:19:08 Delete Colors1 data from setup wizard
    02:19:22 Save the Data in the Setup Wizard
    02:19:24 Click on th setting button
    02:19:48 Navigate to the setup wizard
    02:19:49 Click on the 'Colors' tab
    02:19:51 Click on the add button
    02:19:53 Enter Colors1 in the color name field
    02:19:54 Enter 0 in the color transparency input field
    02:19:55 Enter E06666 in the Color Code field
    02:19:56 Select color from hex code
    02:19:56 Click on the save button
    02:20:01 Verify the new color is added to the Colors list
    02:20:04 Click on the download button and download excel file
    02:20:09 Click on Upload Button and Upload the edited excel file with invalid HEX code
    02:20:09 Verify that the following error message is shown to the user Messages: Errors Found: All Hex Codes must be formatted with a #, for example #000000. Make Appropriate change at line 60 Duplicate ColorCode at line 60
    02:20:10 Click on Ok button
    02:20:13 Click on Upload Button and Upload the edited excel file with valid HEX code
    02:20:16 Test FailVerify that the edited Excel file is not update Messages: Errors Found: Duplicate ColorCode at line 60
    02:20:16 base64-img
  • Trachte-Open Wall Truss Carrier Options

    0h:4m:20s+469ms

    02:21:14 AM
    Trachte-Open Wall Truss Carrier Options
    2024-12-20 02:21:14 2024-12-20 02:25:35 0h:4m:20s+469ms
    Status Timestamp Details
    02:21:14 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    02:21:31 Click on the start from scratch
    02:21:44 Click on the ''Open Wall' tab'
    02:21:54 Click on the 'Drawing' tab
    02:21:56 Click on the ''Assembly Drawing EXT_1''
    02:21:56 Verify that extra girt is not visible in the open wall
    02:21:57 Click on the ''Canvas 3D View'' tab
    02:21:59 Click on the 'Building Size' tab
    02:22:00 Enter 15 in the width field
    02:22:01 Enter 10 in the ceiling height field
    02:22:02 Enter 1 in the roof pitch field
    02:22:04 Click on the ''details' tab'
    02:22:05 Click on the 'wall framing tab'
    02:22:09 Select 4x12 I-Beam element from the open wall post material dropdown
    02:22:11 Click on the 'Truss Carrier tab'
    02:22:18 Select Use Top Girt from the truss carrier style dropdown
    02:22:22 Select None from the top girt material dropdown
    02:22:23 Click on the 'open wall truss carrier tab'
    02:22:30 Select Use Top Girt from the truss carrier style dropdown
    02:22:34 Select BAR JOIST from the Open Wall Top Girt Material material dropdown
    02:22:45 Click on the 'Drawing' tab
    02:22:46 Click on the ''Assembly Drawing EXT_1''
    02:22:48 Click on the ''Canvas 3D View'' tab
    02:22:49 Enter 31 in the Open Wall Top Girt Length Overrides field
    02:22:59 Click on the 'job review button' tab
    02:23:00 Click on the 'Framing tab'
    02:23:01 Verify that the selected Use Top Girt material length is not shown in the Framing data.
    02:23:02 Enter 20 in the Open Wall Top Girt Length Overrides field
    02:23:07 Verify that the selected TopGirt material length is shown in the Framing data.
    02:23:08 Click on the 'Drawing' tab
    02:23:09 Click on the ''Assembly Drawing EXT_1''
    02:23:10 Verify that Use Top Girt material length is update
    02:23:11 Click on the ''Canvas 3D View'' tab
    02:23:18 Select Single from the truss carrier style dropdown
    02:23:22 Select BAR JOIST from the open wall truss carrier material dropdown
    02:23:23 Enter 31' in the open wall carrier length overrides field
    02:23:27 Enter any Invalid value in Open Wall Truss Carrier Material field for material with length 31'
    02:23:35 Click on the 'job review button' tab
    02:23:36 Verify that the selected Single material length is not shown in the Framing data.
    02:23:36 Enter 32' in the open wall carrier length overrides field
    02:23:40 Enter any Valid value in Open Wall Truss Carrier Material field for material with length 32'
    02:23:41 Verify that the selected Single material length is shown in the Framing data.
    02:23:42 Click on the 'Drawing' tab
    02:23:44 Click on the ''Assembly Drawing EXT_1''
    02:23:44 Verify that Single material length is update
    02:23:45 Click on the ''Canvas 3D View'' tab
    02:23:52 Select Double from the truss carrier style dropdown
    02:23:56 Select Zee Steel Shape from the open wall truss carrier material dropdown
    02:23:57 Enter 42' in the open wall carrier length overrides field
    02:24:01 Enter any Invalid value in Open Wall Truss Carrier Material field for material with length 42'
    02:24:09 Click on the 'job review button' tab
    02:24:09 Verify that the selected Double material length is not shown in the Framing data.
    02:24:10 Enter 10' in the open wall carrier length overrides field
    02:24:13 Enter any Valid value in Open Wall Truss Carrier Material field for material with length 10'
    02:24:14 Verify that the selected Single material length is shown in the Framing data.
    02:24:16 Click on the 'Drawing' tab
    02:24:17 Click on the ''Assembly Drawing EXT_1''
    02:24:17 Verify that Double material length is update
    02:24:19 Click on the ''Canvas 3D View'' tab
    02:24:26 Select Triple from the truss carrier style dropdown
    02:24:30 Select I-BEAM 12 X 14# from the open wall truss carrier material dropdown
    02:24:31 Enter 31' in the open wall carrier length overrides field
    02:24:36 Enter any Invalid value in Open Wall Truss Carrier Material field for material with length 31'
    02:24:46 Click on the 'job review button' tab
    02:24:46 Verify that the selected Triple material length is not shown in the Framing data.
    02:24:47 Enter 50' in the open wall carrier length overrides field
    02:24:53 Enter any Valid value in Open Wall Truss Carrier Material field for material with length 50'
    02:24:53 Verify that the selected Triple material length is shown in the Framing data.
    02:24:55 Click on the 'Drawing' tab
    02:24:56 Click on the ''Assembly Drawing EXT_1''
    02:24:57 Verify that Triple material length is update
    02:24:58 Click on the ''Canvas 3D View'' tab
    02:25:05 Select Quadruple from the truss carrier style dropdown
    02:25:09 Select Zee Rotated from the open wall truss carrier material dropdown
    02:25:10 Enter 31' in the open wall carrier length overrides field
    02:25:15 Enter any Invalid value in Open Wall Truss Carrier Material field for material with length 31'
    02:25:23 Click on the 'job review button' tab
    02:25:24 Verify that the selected Quadruple material length is not shown in the Framing data.
    02:25:24 Enter 20' in the open wall carrier length overrides field
    02:25:30 Enter any Valid value in Open Wall Truss Carrier Material field for material with length 20'
    02:25:30 Verify that the selected Quadruple material length is shown in the Framing data.
    02:25:32 Click on the 'Drawing' tab
    02:25:33 Click on the ''Assembly Drawing EXT_1''
    02:25:34 Verify that Quadruple material length is update
    02:25:35 Click on the ''Canvas 3D View'' tab
    02:25:35 Test Pass
  • Exterior metal height

    0h:1m:22s+374ms

    02:26:34 AM
    Exterior metal height
    2024-12-20 02:26:34 2024-12-20 02:27:57 0h:1m:22s+374ms
    Status Timestamp Details
    02:26:34 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    02:26:50 Click on the start from scratch
    02:27:02 Click on the 'Building Size' tab
    02:27:04 Set Top Of Wall Material to the 'Roof Height Style' dropdown
    02:27:05 Enter 12' in the exterior metal height field
    02:27:07 Click on the ''Wainscot' tab'
    02:27:07 Check the 'Has Wainscot' checkbox
    02:27:15 Click on the 'Drawing' tab
    02:27:15 Verify that the Exterior Wall Material length is matched with Exterior metal height
    02:27:17 Click on the ''Canvas 3D View'' tab
    02:27:18 Click on the 'Building Size' tab
    02:27:24 Set 3' to the 'overhang' dropdown
    02:27:25 Click on the change view button
    02:27:26 Click on the Left Elevation
    02:27:34 Click on the 'Drawing' tab
    02:27:34 Verify that the Exterior Wall Material length is still shown as 12' after applying the Overhang is 3'
    02:27:36 Click on the ''Canvas 3D View'' tab
    02:27:40 Click on the 'Building Size' tab
    02:27:46 Set None to the 'overhang' dropdown
    02:27:47 Click on the change view button
    02:27:47 Click on the Left Elevation
    02:27:57 Click on the 'Drawing' tab
    02:27:57 Verify that the Exterior Wall Material length is still shown as 12' after applying Overhang is None'
    02:27:57 Test Pass
  • Assemblies do not save Part Lengths

    0h:2m:25s+656ms

    02:28:55 AM
    Assemblies do not save Part Lengths
    2024-12-20 02:28:55 2024-12-20 02:31:21 0h:2m:25s+656ms
    Status Timestamp Details
    02:28:55 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    02:28:57 Click on th setting button
    02:29:22 Navigate to the setup wizard
    02:29:24 Click on the 'Trim Assemblies' tab
    02:29:28 Click on the 'Sheathing Assemblies' tab
    02:29:34 Click on the 'Trim' tab
    02:29:39 Click on the 'Sheathing' tab
    02:29:42 Check old data are deleted
    02:29:44 Click on the 'Sheathing' tab
    02:29:45 Click on the 'Sheathing' tab
    02:29:46 Click on the add button
    02:29:48 Enter Sheathing Part Length Test in the sku input field
    02:29:49 Enter Part Length of Sheathing in the description input field
    02:29:50 Enter 36 in the coverage width input field
    02:29:52 Enter 37.5 in the full width input field
    02:29:52 Enter 0.25 in the thickness input field
    02:29:54 Select All element from usage table
    02:29:55 Enter the cost in the pricings table
    02:29:58 Enter the price in the pricings table
    02:29:59 Click on the 'Part Length' button
    02:30:05 Enter value in the Part Length
    02:30:07 Click on the save button
    02:30:09 Click on the 'Trim' tab
    02:30:10 Click on the add button
    02:30:12 Enter Trim Part Length Test in the sku input field
    02:30:12 Enter Part Length of Trim in the description input field
    02:30:13 Enter 1 in the width input field
    02:30:13 Enter 1 in the width input field
    02:30:15 Select All element from usage table
    02:30:17 Enter the cost in the pricings table
    02:30:21 Enter the price in the pricings table
    02:30:26 Click on the Add Button
    02:30:28 Enter value in the Part Length
    02:30:30 Click on the save button
    02:30:44 Save the Data in the Setup Wizard
    02:30:45 Click on th setting button
    02:31:12 Navigate to the setup wizard
    02:31:14 Click on the 'Sheathing Assemblies' tab
    02:31:15 Click on the add button
    02:31:16 Enter Test Sheathing Material in the name input field
    02:31:21 Test Fail Part Length of Sheathing is not shown in the dropdown Expected: False But was: True
    02:31:21 base64-img
  • Product System Error

    0h:7m:59s+988ms

    02:32:20 AM
    Product System Error
    2024-12-20 02:32:20 2024-12-20 02:40:20 0h:7m:59s+988ms
    Status Timestamp Details
    02:32:20 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    02:32:21 Click on th setting button
    02:32:48 Navigate to the setup wizard
    02:32:49 Click on the 'Sheathing' tab
    02:32:58 Click on the 'Colors' tab
    02:33:06 Click on the 'System' tab
    02:33:17 Click on the add button
    02:33:24 Remove Main Product System - Product Systems element from usage table
    02:33:26 Select Roof Product System - Product Systems element from usage table
    02:33:27 Enter TestRoof System R-1 in the description input field
    02:33:27 Enter TestRoof System R-1 in the keys input field
    02:33:28 Click on the save button
    02:33:32 Click on the add button
    02:33:38 Remove Main Product System - Product Systems element from usage table
    02:33:41 Select Roof Product System - Product Systems element from usage table
    02:33:41 Enter TestRoof System R-2 in the description input field
    02:33:41 Enter TestRoof System R-2 in the keys input field
    02:33:42 Click on the save button
    02:33:45 Click on the 'Colors' tab
    02:33:47 Click on the add button
    02:33:49 Enter TestRoof Color R-1 in the color name field
    02:33:50 Select color from hex code
    02:33:51 Enter 0 in the color transparency input field
    02:33:52 Enter #254 in the Color Code field
    02:33:55 Select Brick Texture element from color map dropdown
    02:33:59 Select Brick element from bump map dropdown
    02:34:01 Select TestRoof System R-1 element from system table
    02:34:02 Click on the save button
    02:34:04 Click on the add button
    02:34:05 Enter TestRoof Color R-2 in the color name field
    02:34:06 Select color from hex code
    02:34:07 Enter 0 in the color transparency input field
    02:34:08 Enter #126 in the Color Code field
    02:34:12 Select Lap Siding Texture element from color map dropdown
    02:34:15 Select Lap Siding Panel element from bump map dropdown
    02:34:18 Select TestRoof System R-2 element from system table
    02:34:18 Click on the save button
    02:34:19 Click on the 'Sheathing' tab
    02:34:21 Click on the add button
    02:34:22 Enter TestRoof Sheathing R-1 in the sku input field
    02:34:23 Enter TestRoof Sheathing R-1 in the description input field
    02:34:24 Enter 36 in the coverage width input field
    02:34:26 Enter 37 in the full width input field
    02:34:26 Enter 0.25 in the thickness input field
    02:34:30 Select Brick Texture element from color map dropdown
    02:34:34 Select Brick element from bump map dropdown
    02:34:36 Select TestRoof System R-1 element from system table
    02:34:38 Select Roof Material element from usage table
    02:34:40 Enter the cost in the pricings table
    02:34:42 Enter the price in the pricings table
    02:34:42 Click on the save button
    02:34:44 Click on the add button
    02:34:46 Enter TestRoof Sheathing R-2 in the sku input field
    02:34:46 Enter TestRoof Sheathing R-2 in the description input field
    02:34:48 Enter 36 in the coverage width input field
    02:34:49 Enter 37 in the full width input field
    02:34:50 Enter 0.25 in the thickness input field
    02:34:54 Select Lap Siding Texture element from color map dropdown
    02:34:57 Select Lap Siding Panel element from bump map dropdown
    02:34:59 Select TestRoof System R-2 element from system table
    02:35:02 Select Roof Material element from usage table
    02:35:03 Enter the cost in the pricings table
    02:35:05 Enter the price in the pricings table
    02:35:06 Click on the save button
    02:35:19 Save the Data in the Setup Wizard
    02:40:20 Test FailOpenQA.Selenium.WebDriverTimeoutException : Timed out after 300 seconds ----> OpenQA.Selenium.NoSuchElementException : no such element: Unable to locate element: {"method":"xpath","selector":"//a[normalize-space()='Start from Scratch']"} (Session info: chrome=131.0.6778.140); For documentation on this error, please visit: https://www.selenium.dev/documentation/webdriver/troubleshooting/errors#no-such-element-exception
    02:40:20 base64-img
  • Delete Data

    0h:6m:7s+189ms

    02:40:29 AM
    Delete Data
    2024-12-20 02:40:29 2024-12-20 02:46:37 0h:6m:7s+189ms
    Status Timestamp Details
    02:40:29 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    02:40:31 Click on th setting button
    02:40:56 Navigate to the setup wizard
    02:40:58 Click on the 'Sheathing' tab
    02:41:06 Click on the 'Colors' tab
    02:41:15 Click on the 'System' tab
    02:46:36 Test FailOpenQA.Selenium.WebDriverTimeoutException : Timed out after 300 seconds ----> OpenQA.Selenium.NoSuchElementException : no such element: Unable to locate element: {"method":"xpath","selector":"//div[@id='w2ui-popup']//button[@onclick='w2popup.close();']"} (Session info: chrome=131.0.6778.140); For documentation on this error, please visit: https://www.selenium.dev/documentation/webdriver/troubleshooting/errors#no-such-element-exception
    02:46:37 base64-img
  • Verify the Assembly Drawing

    0h:5m:52s+350ms

    02:47:38 AM
    Verify the Assembly Drawing
    2024-12-20 02:47:38 2024-12-20 02:53:30 0h:5m:52s+350ms
    Status Timestamp Details
    02:47:38 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    02:47:39 Click on th setting button
    02:48:04 Navigate to the setup wizard
    02:48:06 Click on the 'Framing' tab
    02:48:11 Click on the add button
    02:48:12 Enter Wood ` Trading` 0 ` 2X0-4 in the sku input field
    02:48:13 Enter Wood ` material ` Trading` 0 ` 2X0-4 in the description input field
    02:48:13 Enter 2 in the width input field
    02:48:14 Enter 6 in the depth input field
    02:48:16 Select All element from usage table
    02:48:16 Click on the save button
    02:48:30 Save the Data in the Setup Wizard
    02:53:30 Test FailOpenQA.Selenium.WebDriverTimeoutException : Timed out after 300 seconds ----> OpenQA.Selenium.NoSuchElementException : no such element: Unable to locate element: {"method":"xpath","selector":"//a[normalize-space()='Start from Scratch']"} (Session info: chrome=131.0.6778.140); For documentation on this error, please visit: https://www.selenium.dev/documentation/webdriver/troubleshooting/errors#no-such-element-exception
    02:53:30 base64-img
  • Set Interior Wall Side as a None

    0h:3m:4s+099ms

    02:54:34 AM
    Set Interior Wall Side as a None
    2024-12-20 02:54:34 2024-12-20 02:57:39 0h:3m:4s+099ms
    Status Timestamp Details
    02:54:34 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    02:54:36 Click on th setting button
    02:54:39 Navigate to the framing rules
    02:54:41 Click on the AUTOTEST_PHTEST framing rules edit button
    02:54:49 Click on the details tab
    02:54:54 Click on the Home button
    02:55:10 Click on the start from scratch
    02:55:22 Click on the ''details' tab'
    02:55:23 Click on the 'Interior Wall tab'
    02:55:23 Verify that both sheathing side options are shown as none
    02:55:25 Click on the 'Divider Wall' tab
    02:55:29 Place a divider wall with both sides none
    02:55:47 Verify that divider wall is place on the canvas building
    02:55:49 Click on the 'job button' tab
    02:55:50 Enter Interior Wall in the job name field
    02:56:20 Click on the save button
    02:56:24 Click on the 'home button'
    02:56:28 Click on the job tab
    02:56:38 open Interior Wall job
    02:57:06 Click on the 'roof button'
    02:57:13 Verify that both sheathing sides A and B are still shown as none
    02:57:16 Click on the 'home button'
    02:57:24 Click on the job tab
    02:57:29 open Interior Wall job
    02:57:30 Click on the Delete button
    02:57:31 Click on the yes button
    02:57:33 Confirm Deletion
    02:57:39 Test Pass
  • Trachte-The catalog based on a range of spacings

    0h:2m:40s+141ms

    02:58:39 AM
    Trachte-The catalog based on a range of spacings
    2024-12-20 02:58:39 2024-12-20 03:01:19 0h:2m:40s+141ms
    Status Timestamp Details
    02:58:39 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    02:58:55 Click on the start from scratch
    02:59:43 Click on the ''details' tab'
    02:59:45 Click on the ''bays' tab'
    02:59:45 Check the 'Use Bays Spacing' checkbox
    02:59:49 Set 12' to the 'Bays Spacing' dropdown
    02:59:58 Click on the 'job review button' tab
    02:59:59 Click on the 'trusses tab'
    03:00:00 Click on the i button of L-1 element
    03:00:01 Enter C30P4HH7SP12L20-10-10GB in the sku field
    03:00:03 Click on the 'add to truss table button tab'
    03:00:07 Click on the i button of T-1 element
    03:00:08 Enter C30P4HH7SP12L20-10-10 in the sku field
    03:00:10 Click on the 'add to truss table button tab'
    03:00:25 Double Click on the C30P4HH7SP12L20-10-10 element
    03:00:25 Verify that the C30P4HH7SP12L20-10-10 is existed in the trusses table
    03:00:25 Enter 8 in the min spacing field
    03:00:25 Change the Minimum Spacing value from Truss Material Data
    03:00:26 Enter 8 in the max spacing field
    03:00:26 Change the Maximum Spacing value from Truss Material Data
    03:00:28 Click on the save button
    03:00:39 Double Click on the C30P4HH7SP12L20-10-10GB element
    03:00:39 Verify that the C30P4HH7SP12L20-10-10GB is existed in the trusses table
    03:00:39 Enter 8 in the min spacing field
    03:00:39 Change the Minimum Spacing value from Truss Material Data
    03:00:40 Enter 8 in the max spacing field
    03:00:40 Change the Maximum Spacing value from Truss Material Data
    03:00:43 Click on the save button
    03:00:50 Verified that if the truss is outside the valid spacing range then the program shows an error of not an exact match.
    03:01:04 Click on the delete button
    03:01:06 Click on the yes button
    03:01:16 Click on the delete button
    03:01:18 Click on the yes button
    03:01:19 Test Pass
  • Verify Cloning for the Color

    0h:6m:1s+592ms

    03:02:21 AM
    Verify Cloning for the Color
    2024-12-20 03:02:21 2024-12-20 03:08:22 0h:6m:1s+592ms
    Status Timestamp Details
    03:02:21 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    03:02:22 Click on th setting button
    03:02:46 Navigate to the setup wizard
    03:02:48 Click on the 'Colors' tab
    03:02:52 Click on the first material of table
    03:02:52 Click on the clone button
    03:02:54 Enter Red Roof Color in the color name field
    03:02:56 Enter 0 in the color transparency input field
    03:02:56 Enter Test Clone Color in the Color Code field
    03:02:57 Select color from hex code
    03:02:58 Click on the save button
    03:03:03 Verify the new Cloned color is applied to the Colors list
    03:03:05 Click on the 'Sheathing' tab
    03:03:05 Click on the First row of Sheathing table
    03:03:08 Verify that the New Cloned Color has been applied automatically to the list of colors
    03:03:22 Save the Data in the Setup Wizard
    03:08:22 Test FailOpenQA.Selenium.WebDriverTimeoutException : Timed out after 300 seconds ----> OpenQA.Selenium.NoSuchElementException : no such element: Unable to locate element: {"method":"xpath","selector":"//a[normalize-space()='Start from Scratch']"} (Session info: chrome=131.0.6778.140); For documentation on this error, please visit: https://www.selenium.dev/documentation/webdriver/troubleshooting/errors#no-such-element-exception
    03:08:22 base64-img
  • Maximum Length for Panel

    0h:7m:44s+283ms

    03:09:25 AM
    Maximum Length for Panel
    2024-12-20 03:09:25 2024-12-20 03:17:09 0h:7m:44s+283ms
    Status Timestamp Details
    03:09:25 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    03:09:26 Click on th setting button
    03:09:52 Navigate to the setup wizard
    03:09:53 Click on the 'Sheathing' tab
    03:10:06 Click on the add button
    03:10:08 Enter Without Part Length Positive in the sku input field
    03:10:08 Enter Without Part Length Positive in the description input field
    03:10:10 Enter 36 in the coverage width input field
    03:10:11 Enter 37.5 in the full width input field
    03:10:12 Enter 0.25 in the thickness input field
    03:10:13 Enter 5 in the underlap length input field
    03:10:15 Select All element from usage table
    03:10:17 Enter 50 in the maximum length input field
    03:10:17 Click on the save button
    03:10:18 Click on the add button
    03:10:20 Enter Without Part Length Negative in the sku input field
    03:10:20 Enter Without Part Length Negative in the description input field
    03:10:22 Enter 36 in the coverage width input field
    03:10:23 Enter 37.5 in the full width input field
    03:10:24 Enter 0.25 in the thickness input field
    03:10:25 Enter 5 in the underlap length input field
    03:10:27 Select All element from usage table
    03:10:29 Enter -50 in the maximum length input field
    03:10:29 Click on the save button
    03:10:31 Click on the add button
    03:10:32 Enter With Part Length Element in the sku input field
    03:10:33 Enter With Part Length Element in the description input field
    03:10:34 Enter 36 in the coverage width input field
    03:10:36 Enter 37.5 in the full width input field
    03:10:36 Enter 0.25 in the thickness input field
    03:10:38 Enter 5 in the underlap length input field
    03:10:40 Select All element from usage table
    03:10:41 Enter 50 in the maximum length input field
    03:10:42 Enter the cost in the pricings table
    03:10:45 Enter the price in the pricings table
    03:10:46 Click on the 'Part Length' button
    03:10:46 Enter Data in the Part Length Field
    03:10:47 Click on the save button
    03:10:54 Click on the download button and download excel file
    03:11:55 Verify that the XLSX file is downloaded
    03:12:09 Save the Data in the Setup Wizard
    03:17:09 Test FailOpenQA.Selenium.WebDriverTimeoutException : Timed out after 300 seconds ----> OpenQA.Selenium.NoSuchElementException : no such element: Unable to locate element: {"method":"xpath","selector":"//a[normalize-space()='Start from Scratch']"} (Session info: chrome=131.0.6778.140); For documentation on this error, please visit: https://www.selenium.dev/documentation/webdriver/troubleshooting/errors#no-such-element-exception
    03:17:09 base64-img
  • switching Product Systems

    0h:7m:42s+322ms

    03:18:13 AM
    switching Product Systems
    2024-12-20 03:18:13 2024-12-20 03:25:55 0h:7m:42s+322ms
    Status Timestamp Details
    03:18:13 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    03:18:14 Click on th setting button
    03:18:43 Navigate to the setup wizard
    03:18:45 Click on the 'Trim' tab
    03:18:56 Delete TrimRidgeCap1 data from setup wizard
    03:19:08 Delete TrimRidgeCap2 data from setup wizard
    03:19:20 Delete TrimRidgeCap3 data from setup wizard
    03:19:21 Click on the 'System' tab
    03:19:39 Save the Data in the Setup Wizard
    03:19:40 Click on th setting button
    03:20:06 Navigate to the setup wizard
    03:20:07 Click on the 'System' tab
    03:20:07 Delete data from setup wizard
    03:20:09 Click on the add button
    03:20:09 Enter RoofTest1 in the description input field
    03:20:09 Enter RoofTest1 in the keys input field
    03:20:14 Remove Main Product System - Product Systems element from usage table
    03:20:16 Select Roof Product System - Product Systems element from usage table
    03:20:17 Click on the save button
    03:20:18 Click on the 'Trim' tab
    03:20:19 Click on the add button
    03:20:20 Enter TrimRidgeCap1 in the description input field
    03:20:20 Enter 1 in the width input field
    03:20:21 Enter 1 in the width input field
    03:20:23 Select RoofTest1 element from system table
    03:20:25 Select Ridge Cap element from usage table
    03:20:26 Click on the save button
    03:20:28 Click on the add button
    03:20:28 Enter TrimRidgeCap2 in the description input field
    03:20:28 Enter 1 in the width input field
    03:20:29 Enter 1 in the width input field
    03:20:31 Select RoofTest1 element from system table
    03:20:33 Select Ridge Cap element from usage table
    03:20:34 Click on the save button
    03:20:35 Click on the add button
    03:20:35 Enter TrimRidgeCap3 in the description input field
    03:20:36 Enter 1 in the width input field
    03:20:36 Enter 1 in the width input field
    03:20:39 Select RoofTest1 element from system table
    03:20:41 Select Ridge Cap element from usage table
    03:20:41 Click on the save button
    03:20:55 Save the Data in the Setup Wizard
    03:25:55 Test FailOpenQA.Selenium.WebDriverTimeoutException : Timed out after 300 seconds ----> OpenQA.Selenium.NoSuchElementException : no such element: Unable to locate element: {"method":"xpath","selector":"//a[normalize-space()='Start from Scratch']"} (Session info: chrome=131.0.6778.140); For documentation on this error, please visit: https://www.selenium.dev/documentation/webdriver/troubleshooting/errors#no-such-element-exception
    03:25:55 base64-img
  • Delete data

    0h:1m:22s+491ms

    03:26:05 AM
    Delete data
    2024-12-20 03:26:05 2024-12-20 03:27:28 0h:1m:22s+491ms
    Status Timestamp Details
    03:26:05 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    03:26:07 Click on th setting button
    03:26:32 Navigate to the setup wizard
    03:26:34 Click on the 'Trim' tab
    03:26:45 Delete TrimRidgeCap1 data from setup wizard
    03:26:57 Delete TrimRidgeCap2 data from setup wizard
    03:27:09 Delete TrimRidgeCap3 data from setup wizard
    03:27:10 Click on the 'System' tab
    03:27:28 Save the Data in the Setup Wizard
    03:27:28 Test Pass
  • Re-orders the Product Systems List

    0h:9m:16s+550ms

    03:28:33 AM
    Re-orders the Product Systems List
    2024-12-20 03:28:33 2024-12-20 03:37:49 0h:9m:16s+550ms
    Status Timestamp Details
    03:28:33 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    03:28:34 Click on th setting button
    03:28:37 Navigate to the framing rules
    03:29:01 Open new tab and navigate to Setup Wizard
    03:29:02 Click on the 'System' tab
    03:29:25 Click on the add button
    03:29:25 Enter Main Product-1 in the description input field
    03:29:26 Enter Main Product-1 in the keys input field
    03:29:26 Click on the save button
    03:29:28 Click on the add button
    03:29:28 Enter Main Product-2 in the description input field
    03:29:29 Enter Main Product-2 in the keys input field
    03:29:29 Click on the save button
    03:29:31 Click on the add button
    03:29:32 Enter Main Product-3 in the description input field
    03:29:32 Enter Main Product-3 in the keys input field
    03:29:32 Click on the save button
    03:29:32 Add Data in Main Product System.
    03:29:34 Click on the add button
    03:29:39 Remove Main Product System - Product Systems element from usage table
    03:29:40 Enter Roof Product System-1 in the description input field
    03:29:40 Enter Roof Product System-1 in the keys input field
    03:29:42 Select Roof Product System - Product Systems element from usage table
    03:29:43 Click on the save button
    03:29:44 Click on the add button
    03:29:49 Remove Main Product System - Product Systems element from usage table
    03:29:49 Enter Roof Product System-2 in the description input field
    03:29:50 Enter Roof Product System-2 in the keys input field
    03:29:52 Select Roof Product System - Product Systems element from usage table
    03:29:52 Click on the save button
    03:29:54 Click on the add button
    03:29:59 Remove Main Product System - Product Systems element from usage table
    03:29:59 Enter Roof Product System-3 in the description input field
    03:30:00 Enter Roof Product System-3 in the keys input field
    03:30:02 Select Roof Product System - Product Systems element from usage table
    03:30:02 Click on the save button
    03:30:02 Add Data in Roof Product System.
    03:30:18 Save the Data in the Setup Wizard
    03:30:18 Open Framing Rule page tab
    03:30:20 Click on the AUTOTEST_PHTEST framing rules edit button
    03:30:28 Click on the cross icon button
    03:30:28 Get the None Ceiling Product System Main Product System T1-11 Sheathing SystemsData TestRoof data before the setup wizard changes
    03:30:31 Click on the cross icon button
    03:30:31 Get the (match main) None 3 tab Shingle Asphalt Shingle Roof Roof Product System TestRoof Test 1 data before the setup wizard changes
    03:30:32 Click on th setting button
    03:31:00 Navigate to the setup wizard
    03:31:01 Click on the 'System' tab
    03:31:01 Click on the first material of table
    03:31:10 Click on the first material of table
    03:31:11 Click on the restore button
    03:31:13 Click on the yes button
    03:31:26 Save the Data in the Setup Wizard
    03:31:36 Navigate to Framing Rules
    03:31:43 Click on the cross icon button
    03:31:43 Get the None Ceiling Product System Main Product System T1-11 Sheathing SystemsData TestRoof data after the setup wizard changes
    03:31:43 Verify that the main product system list doesn’t reorder in the framing rule after applying any change in the setup wizard.
    03:31:45 Click on the cross icon button
    03:31:45 Get the (match main) None 3 tab Shingle Asphalt Shingle Roof Roof Product System TestRoof Test 1 data after the setup wizard changes
    03:31:45 Get the Roof product data after the setup wizard changes
    03:31:45 Verify that the Roof product system list doesn’t reorder in the framing rule after applying any change in the setup wizard.
    03:32:14 Open new tab and navigate to Setup Wizard
    03:32:15 Click on the 'System' tab
    03:37:49 Test FailOpenQA.Selenium.WebDriverTimeoutException : Timed out after 300 seconds ----> OpenQA.Selenium.NoSuchElementException : no such element: Unable to locate element: {"method":"xpath","selector":"//div[@id='w2ui-popup']//button[@onclick='w2popup.close();']"} (Session info: chrome=131.0.6778.140); For documentation on this error, please visit: https://www.selenium.dev/documentation/webdriver/troubleshooting/errors#no-such-element-exception
    03:37:49 base64-img
  • Roof Framing Style

    0h:3m:4s+022ms

    03:38:54 AM
    Roof Framing Style
    2024-12-20 03:38:54 2024-12-20 03:41:58 0h:3m:4s+022ms
    Status Timestamp Details
    03:38:54 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    03:39:11 Click on the start from scratch
    03:39:25 Click on the 'Attached Building' tab
    03:39:31 Set Rafters to the 'roof framing' dropdown
    03:39:32 Check the 'Advanced' checkbox
    03:39:36 Set Shed to the 'roof style' dropdown
    03:39:36 Verify that Roof Style still shows 'Rafters' after selecting 'Shed' from the Roof Style dropdown.
    03:39:40 Set Gable to the 'roof style' dropdown
    03:39:40 Verify that Roof Style still shows 'Rafters' after selecting 'Gable' from the Roof Style dropdown.
    03:39:43 Set Gambrel to the 'roof style' dropdown
    03:39:44 Verify that Roof Style still shows 'Rafters' after selecting 'Gambrel' from the Roof Style dropdown.
    03:39:47 Set Trusses to the 'roof framing' dropdown
    03:39:48 Check the 'Advanced' checkbox
    03:39:51 Set Shed to the 'roof style' dropdown
    03:39:51 Verify that Roof Style still shows 'Trusses' after selecting 'Shed' from the Roof Style dropdown.
    03:39:55 Set Gable to the 'roof style' dropdown
    03:39:55 Verify that Roof Style still shows 'Trusses' after selecting 'Gable' from the Roof Style dropdown.
    03:39:59 Set Gambrel to the 'roof style' dropdown
    03:39:59 Verify that Roof Style still shows 'Trusses' after selecting 'Gambrel' from the Roof Style dropdown.
    03:40:02 Click on the 'Porch' tab
    03:40:04 Click on the 'Front Left'
    03:40:08 Set Trusses to the 'roof framing' dropdown
    03:40:09 Check the 'Advanced' checkbox
    03:40:15 Set Balloon Framed to the 'Gable Walls Style' dropdown
    03:40:15 Verify that the attribute value is still 'Trusses' after the Gable Wall Style change
    03:40:15 Verify that the attribute value is still 'Flat' after the Gable Wall Style change
    03:40:15 Verify that the attribute value is still 'Wood' after the Gable Wall Style change
    03:40:21 Set Gable Truss to the 'Gable Walls Style' dropdown
    03:40:21 Verify that the attribute value is still 'Trusses' after the Gable Wall Style change
    03:40:21 Verify that the attribute value is still 'Flat' after the Gable Wall Style change
    03:40:21 Verify that the attribute value is still 'Wood' after the Gable Wall Style change
    03:40:27 Set Gable Truss(Short Post) to the 'Gable Walls Style' dropdown
    03:40:27 Verify that the attribute value is still 'Trusses' after the Gable Wall Style change
    03:40:27 Verify that the attribute value is still 'Flat' after the Gable Wall Style change
    03:40:27 Verify that the attribute value is still 'Wood' after the Gable Wall Style change
    03:40:33 Set Inset Gable to the 'Gable Walls Style' dropdown
    03:40:33 Verify that the attribute value is still 'Trusses' after the Gable Wall Style change
    03:40:33 Verify that the attribute value is still 'Flat' after the Gable Wall Style change
    03:40:33 Verify that the attribute value is still 'Wood' after the Gable Wall Style change
    03:40:39 Set Inset Gable (Short Post) to the 'Gable Walls Style' dropdown
    03:40:39 Verify that the attribute value is still 'Trusses' after the Gable Wall Style change
    03:40:39 Verify that the attribute value is still 'Flat' after the Gable Wall Style change
    03:40:39 Verify that the attribute value is still 'Wood' after the Gable Wall Style change
    03:40:42 Click on the 'Lean To' tab
    03:40:43 Click on the 'Front Left'
    03:40:47 Set Trusses to the 'roof framing' dropdown
    03:40:47 Check the 'Advanced' checkbox
    03:40:53 Set Balloon Framed to the 'Gable Walls Style' dropdown
    03:40:54 Verify that the attribute value is still 'Trusses' after the Gable Wall Style change
    03:40:54 Verify that the attribute value is still 'Flat' after the Gable Wall Style change
    03:40:54 Verify that the attribute value is still 'Wood' after the Gable Wall Style change
    03:41:00 Set Gable Truss to the 'Gable Walls Style' dropdown
    03:41:00 Verify that the attribute value is still 'Trusses' after the Gable Wall Style change
    03:41:00 Verify that the attribute value is still 'Flat' after the Gable Wall Style change
    03:41:00 Verify that the attribute value is still 'Wood' after the Gable Wall Style change
    03:41:06 Set Gable Truss(Short Post) to the 'Gable Walls Style' dropdown
    03:41:06 Verify that the attribute value is still 'Trusses' after the Gable Wall Style change
    03:41:06 Verify that the attribute value is still 'Flat' after the Gable Wall Style change
    03:41:06 Verify that the attribute value is still 'Wood' after the Gable Wall Style change
    03:41:12 Set Inset Gable to the 'Gable Walls Style' dropdown
    03:41:12 Verify that the attribute value is still 'Trusses' after the Gable Wall Style change
    03:41:12 Verify that the attribute value is still 'Flat' after the Gable Wall Style change
    03:41:12 Verify that the attribute value is still 'Wood' after the Gable Wall Style change
    03:41:18 Set Inset Gable (Short Post) to the 'Gable Walls Style' dropdown
    03:41:18 Verify that the attribute value is still 'Trusses' after the Gable Wall Style change
    03:41:18 Verify that the attribute value is still 'Flat' after the Gable Wall Style change
    03:41:18 Verify that the attribute value is still 'Wood' after the Gable Wall Style change
    03:41:21 Click on the 'Awning' tab
    03:41:22 Click on the 'Front Left'
    03:41:26 Set Trusses to the 'roof framing' dropdown
    03:41:26 Check the 'Advanced' checkbox
    03:41:32 Set Balloon Framed to the 'Gable Walls Style' dropdown
    03:41:32 Verify that the attribute value is still 'Trusses' after the Gable Wall Style change
    03:41:32 Verify that the attribute value is still 'Flat' after the Gable Wall Style change
    03:41:32 Verify that the attribute value is still 'Wood' after the Gable Wall Style change
    03:41:38 Set Gable Truss to the 'Gable Walls Style' dropdown
    03:41:38 Verify that the attribute value is still 'Trusses' after the Gable Wall Style change
    03:41:38 Verify that the attribute value is still 'Flat' after the Gable Wall Style change
    03:41:38 Verify that the attribute value is still 'Wood' after the Gable Wall Style change
    03:41:44 Set Gable Truss(Short Post) to the 'Gable Walls Style' dropdown
    03:41:44 Verify that the attribute value is still 'Trusses' after the Gable Wall Style change
    03:41:44 Verify that the attribute value is still 'Flat' after the Gable Wall Style change
    03:41:44 Verify that the attribute value is still 'Wood' after the Gable Wall Style change
    03:41:50 Set Inset Gable to the 'Gable Walls Style' dropdown
    03:41:50 Verify that the attribute value is still 'Trusses' after the Gable Wall Style change
    03:41:50 Verify that the attribute value is still 'Flat' after the Gable Wall Style change
    03:41:50 Verify that the attribute value is still 'Wood' after the Gable Wall Style change
    03:41:56 Set Inset Gable (Short Post) to the 'Gable Walls Style' dropdown
    03:41:56 Verify that the attribute value is still 'Trusses' after the Gable Wall Style change
    03:41:56 Verify that the attribute value is still 'Flat' after the Gable Wall Style change
    03:41:56 Verify that the attribute value is still 'Wood' after the Gable Wall Style change
    03:41:58 Test Pass
  • Add Category field input

    0h:7m:50s+228ms

    03:43:05 AM
    Add Category field input
    2024-12-20 03:43:05 2024-12-20 03:50:56 0h:7m:50s+228ms
    Status Timestamp Details
    03:43:05 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    03:43:07 Click on th setting button
    03:43:09 Navigate to the job page
    03:43:10 Click on the add new button
    03:43:10 Click on the blank button
    03:43:13 Enter MainPackage in the group name field
    03:43:14 Enter TestMainPackageData in the package name field
    03:43:16 Click on the 'add catalog button' tab
    03:43:17 Category Dropdown is shown to the Main Packages
    03:43:21 Select Accessories from the output category dropdown
    03:43:26 Select WalkDoor Hardware from the catalog category dropdown
    03:43:28 Enter MainPackageUsageMaterial in the usage field
    03:43:30 Click on the add misc button
    03:43:30 Change the WalkDoor Package from the
    03:43:33 Click on the add new button
    03:43:34 Click on the blank button
    03:43:36 Enter WalkDoorPackage in the group name field
    03:43:37 Enter TestWalkDoorPackageData in the package name field
    03:43:39 Click on the 'add catalog button' tab
    03:43:40 Category Dropdown is shown to the WalkDoor Packages
    03:43:44 Select Labor from the output category dropdown
    03:43:49 Select WalkDoor Hardware from the catalog category dropdown
    03:43:51 Enter WalkDoorPackageUsageMaterial in the usage field
    03:43:53 Click on the add misc button
    03:43:53 Change the Overhead Package from the
    03:43:56 Click on the add new button
    03:43:57 Click on the blank button
    03:43:59 Enter OverheadPackage in the group name field
    03:44:00 Enter TestOverheadPackageData in the package name field
    03:44:02 Click on the 'add catalog button' tab
    03:44:03 Category Dropdown is shown to the Overhead Packages
    03:44:08 Select Labor from the output category dropdown
    03:44:12 Select Overhead Hardware from the catalog category dropdown
    03:44:14 Enter OverheadPackageUsageMaterial in the usage field
    03:44:16 Click on the add misc button
    03:44:16 Change the Slider Package from the
    03:44:19 Click on the add new button
    03:44:20 Click on the blank button
    03:44:22 Enter SliderPackage in the group name field
    03:44:23 Enter TestSliderPackageData in the package name field
    03:44:25 Click on the 'add catalog button' tab
    03:44:26 Category Dropdown is shown to the Slider Packages
    03:44:30 Select Freight from the output category dropdown
    03:44:35 Select Slider Hardware from the catalog category dropdown
    03:44:37 Enter SliderPackageUsageMaterial in the usage field
    03:44:39 Click on the add misc button
    03:44:39 Change the Window Package from the
    03:44:42 Click on the add new button
    03:44:43 Click on the blank button
    03:44:45 Enter WindowPackage in the group name field
    03:44:46 Enter TestWindowPackageData in the package name field
    03:44:48 Click on the 'add catalog button' tab
    03:44:49 Category Dropdown is shown to the Window Packages
    03:44:53 Select Trim from the output category dropdown
    03:44:58 Select Window Hardware from the catalog category dropdown
    03:45:00 Enter WindowPackageUsageMaterial in the usage field
    03:45:02 Click on the add misc button
    03:45:13 Click on the save button
    03:45:29 Click on the start from scratch
    03:45:39 Click on the opening
    03:45:40 Click on the walkdoor
    03:45:42 Click on the Solid
    03:45:44 Click on the 3x7 LIS Solid Steel Door
    03:45:51 Click on the 'package' tab
    03:45:55 Click on the Main Package Checkbox
    03:46:04 Verify that Door is place on the canvas building
    03:46:05 Click on the 'job review button' tab
    03:46:07 Click on the 'Accessories tab'
    03:46:07 Verify that the Main Package is applied to the canvas building
    03:46:08 Click on the ''Canvas 3D View'' tab
    03:46:08 Click on the opening
    03:46:09 Click on the walkdoor
    03:46:12 Click on the Solid
    03:46:14 Click on the 3x7 LIS Solid Steel Door
    03:46:21 Apply the WalkDoor on the canvas Building
    03:46:32 Verify that Door is place on the canvas building
    03:46:33 Click on the 'job review button' tab
    03:46:35 Click on the 'Labor tab'
    03:46:35 Verify that the Main Package is applied to the canvas building
    03:46:36 Click on the ''Canvas 3D View'' tab
    03:46:38 Click on the change view button
    03:46:38 Click on the Back Right
    03:46:38 Click on the opening
    03:46:39 Click on the overhead door
    03:46:42 Click on the Raised Panel
    03:46:44 Click on the 10x10 OHD-no windows
    03:46:52 Apply the OverHead on the canvas Building
    03:47:02 Verify that Door is place on the canvas building
    03:47:04 Click on the 'job review button' tab
    03:47:05 Click on the 'Labor tab'
    03:47:05 Verify that the OverHead Package is applied to the canvas building
    03:47:07 Click on the ''Canvas 3D View'' tab
    03:47:07 Click on the opening
    03:47:08 Click on the Slider
    03:47:24 Verify that Door is place on the canvas building
    03:47:26 Click on the 'job review button' tab
    03:47:27 Click on the 'Freight tab'
    03:47:27 Verify that the Slider Package is applied to the canvas building
    03:47:29 Click on the ''Canvas 3D View'' tab
    03:47:30 Click on the change view button
    03:47:30 Click on the Front Right
    03:47:31 Click on the opening
    03:47:32 Click on the windows
    03:47:34 Click on the Slider
    03:47:36 Click on the 30x30 Slider
    03:47:44 Apply the Window on the canvas Building
    03:47:55 Verify that Door is place on the canvas building
    03:47:56 Click on the 'job review button' tab
    03:47:58 Click on the 'Trim tab'
    03:47:58 Verify that the Window Package is applied to the canvas building
    03:47:59 Click on the ''Canvas 3D View'' tab
    03:48:01 Click on the ''Canvas 3D View'' tab
    03:48:03 Click on the 'job button' tab
    03:48:04 Enter Add Category Field in the job name field
    03:48:36 Click on the save button
    03:48:41 Click on the 'home button'
    03:48:42 Click on th setting button
    03:48:46 Navigate to the job page
    03:48:47 Click on the newly added material
    03:48:48 Click on the edit button
    03:48:54 Select Labor from the output category dropdown
    03:48:57 Click on the add misc button
    03:48:57 Change the WalkDoor Package from the
    03:49:00 Click on the newly added material
    03:49:02 Click on the edit button
    03:49:08 Select Sheathing from the output category dropdown
    03:49:10 Click on the add misc button
    03:49:10 Change the Overhead Package from the
    03:49:14 Click on the newly added material
    03:49:15 Click on the edit button
    03:49:21 Select Accessories from the output category dropdown
    03:49:23 Click on the add misc button
    03:49:24 Change the Slider Package from the
    03:49:27 Click on the newly added material
    03:49:28 Click on the edit button
    03:49:35 Select Labor from the output category dropdown
    03:49:37 Click on the add misc button
    03:49:37 Change the Window Package from the
    03:49:40 Click on the newly added material
    03:49:42 Click on the edit button
    03:49:48 Select Accessories from the output category dropdown
    03:49:50 Click on the add misc button
    03:50:03 Click on the save button
    03:50:07 Click on the job tab
    03:50:17 open Add Category Field job
    03:50:46 Click on the 'job review button' tab
    03:50:47 Click on the 'Labor tab'
    03:50:47 Verify that the new category is applied to Main Package elements
    03:50:49 Click on the 'sheathing tab'
    03:50:49 Verify that the new category is applied to WalkDoor Package elements
    03:50:50 Click on the 'Accessories tab'
    03:50:50 Verify that the new category is applied to OverHead Package elements
    03:50:52 Click on the 'Labor tab'
    03:50:52 Verify that the new category is applied to Slider Package elements
    03:50:53 Click on the 'Accessories tab'
    03:50:53 Verify that the new category is applied to Window Package elements
    03:50:54 Click on the ''Canvas 3D View'' tab
    03:50:56 Click on the 'home button'
    03:50:56 Test Pass
  • Delete Data

    0h:1m:0s+364ms

    03:51:05 AM
    Delete Data
    2024-12-20 03:51:05 2024-12-20 03:52:06 0h:1m:0s+364ms
    Status Timestamp Details
    03:51:05 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    03:51:07 Click on th setting button
    03:51:09 Navigate to the job page
    03:51:13 Change the WalkDoor Package from the
    03:51:18 Change the Overhead Package from the
    03:51:24 Change the Slider Package from the
    03:51:29 Change the Window Package from the
    03:51:46 Click on the save button
    03:51:50 Click on the job tab
    03:51:55 open Add Category Field job
    03:51:57 Click on the Delete button
    03:51:58 Click on the yes button
    03:52:00 Confirm Deletion
    03:52:06 Test Pass
  • Items missing Pick List with Group add-ons checked

    0h:7m:41s+933ms

    03:53:11 AM
    Items missing Pick List with Group add-ons checked
    2024-12-20 03:53:11 2024-12-20 04:00:53 0h:7m:41s+933ms
    Status Timestamp Details
    03:53:11 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    03:53:12 Click on th setting button
    03:53:14 Navigate to the materials page
    03:53:18 Click on the 'add button' tab
    03:53:19 Enter Pick no add group ons(PDF) in the description field
    03:53:23 Select Job Data PDF from the type dropdown
    03:53:23 Check the 'Ignore Usage' checkbox
    03:53:23 Check the 'Group Addons' checkbox
    03:53:25 Click on the 'Save' button
    03:53:26 Click on the 'add button' tab
    03:53:27 Enter Pick no add group ons(CSV) in the description field
    03:53:31 Select Job Data CSV from the type dropdown
    03:53:31 Check the 'Ignore Usage' checkbox
    03:53:31 Check the 'Group Addons' checkbox
    03:53:32 Click on the 'Save' button
    03:53:34 Click on the 'add button' tab
    03:53:35 Enter Pick add group ons(PDF) in the description field
    03:53:38 Select Job Data PDF from the type dropdown
    03:53:38 Check the 'Ignore Usage' checkbox
    03:53:40 Click on the 'Save' button
    03:53:41 Click on the 'add button' tab
    03:53:42 Enter Pick add group ons(CSV) in the description field
    03:53:46 Select Job Data CSV from the type dropdown
    03:53:46 Check the 'Ignore Usage' checkbox
    03:53:47 Click on the 'Save' button
    03:53:49 Click on the 'Main Save' button
    03:54:10 Click on the start from scratch
    03:54:20 Click on the opening
    03:54:21 Click on the walkdoor
    03:54:23 Click on the Solid
    03:54:25 Click on the 3x7 LIS Solid Steel Door
    03:54:36 Verify that Door is placed on the canvas building
    03:54:37 Click on the opening
    03:54:38 Click on the walkdoor
    03:54:40 Click on the Solid
    03:54:42 Click on the 3x7 LIS Solid Steel Door
    03:54:43 Click on the Add ons
    03:54:43 Click on the plus(+) icon of default job
    03:54:45 Click on the #8 x 1 1/4 Flathead Phillips
    03:54:47 Click on the plus(+) icon of default job
    03:54:50 Click on the plus(+) icon of default job
    03:54:52 Click on the 12 X 3 WOOD SCREW FLAT PHILLIPS
    03:54:54 Click on the plus(+) icon of default job
    03:54:56 Click on the plus(+) icon of default job
    03:54:59 Click on the 12-24 X 2 MACHINE SCREW FLAT
    03:55:01 Click on the plus(+) icon of default job
    03:55:04 Click on the change view button
    03:55:05 Click on the Back Right
    03:55:17 Verify that Door is placed on the canvas building
    03:55:20 Click on the 'job button' tab
    03:55:20 Enter Pick List in the job name field
    03:55:50 Click on the save button
    03:55:52 Click on the outputs button
    04:00:53 Test FailOpenQA.Selenium.WebDriverTimeoutException : Timed out after 300 seconds ----> OpenQA.Selenium.NoSuchElementException : no such element: Unable to locate element: {"method":"xpath","selector":"//div[@id='optionList']//div[@class='w2ui-page page-0']//span[text()='Pick add group ons(PDF)']//preceding::input[1]"} (Session info: chrome=131.0.6778.140); For documentation on this error, please visit: https://www.selenium.dev/documentation/webdriver/troubleshooting/errors#no-such-element-exception
    04:00:53 base64-img
  • Delete Data

    0h:0m:9s+554ms

    04:01:03 AM
    Delete Data
    2024-12-20 04:01:03 2024-12-20 04:01:12 0h:0m:9s+554ms
    Status Timestamp Details
    04:01:03 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    04:01:04 Click on th setting button
    04:01:06 Navigate to the materials page
    04:01:12 Test Fail Pick add group ons(PDF) is not shown in the dropdown Expected: False But was: True
    04:01:12 base64-img
  • Add Category field input

    0h:3m:33s+342ms

    04:02:19 AM
    Add Category field input
    2024-12-20 04:02:19 2024-12-20 04:05:53 0h:3m:33s+342ms
    Status Timestamp Details
    04:02:31 Click on the job tab
    04:02:33 Navigate to the 'Jobs' page
    04:02:33 Click on the (---) button
    04:02:34 Click on the Copy button
    04:02:38 Click on the yes button
    04:02:49 open Zombie Parts copy 1 job
    04:03:00 Create the new copy of job
    04:03:00 Click on the edit button of the newly created job
    04:03:04 Click on the 'job button' tab
    04:03:04 Enter Testing Job Report in the job name field
    04:03:13 Click on the 'Yes button'
    04:03:34 Click on the save button
    04:03:35 Click on the 'Prep for Order' tab
    04:03:42 Click on the 'yes' button
    04:03:50 Click on the 'Job List' button'
    04:04:00 open Testing Job Report job
    04:04:06 Verified that the job status is not changed from New to
    04:04:06 Click on the 'Prep' button of the newly created job
    04:04:06 Roof system dropdown are disable because the job status is 'Order'
    04:04:09 Click on the Unlock button
    04:04:16 Click on the Yes pop of button
    04:04:23 Roof system dropdown are not disable because the job status is 'New'
    04:04:25 Click on the Prep for Order button
    04:04:35 Click on the Yes pop of button
    04:04:44 Click on the Make Order button
    04:04:49 Click on the Yes pop of button
    04:04:58 Click on the 'Job List' button'
    04:05:09 open Testing Job Report job
    04:05:15 Verified that the job status is not changed from to
    04:05:15 Click on the 'View' button of the newly created job
    04:05:17 Click on the 'Job List' button'
    04:05:29 Verify that the CSV file is downloaded
    04:05:43 Column 1: Values do not match Name Testing Job Report
    04:05:43 Column 2: Values do not match Address
    04:05:43 Column 3: Values do not match City
    04:05:43 Column 4: Values do not match State
    04:05:43 Column 5: Values do not match Zip
    04:05:43 Column 6: Values do not match User Kritika Dhillon
    04:05:43 Column 7: Values do not match Distributor AUTOTEST_EAGLEVIEW BASE
    04:05:43 Column 8: Values do not match Status
    04:05:43 Column 9: Values do not match CreatedDate Ordered
    04:05:43 Column 10: Values do not match ModifiedDate 12/20/2024 4:02:35 AM
    04:05:43 Column 11: Values do not match QuotedDate 12/20/2024 4:04:47 AM
    04:05:53 Test Pass
  • Apply a min length for Panels

    0h:1m:40s+193ms

    04:07:06 AM
    Apply a min length for Panels
    2024-12-20 04:07:06 2024-12-20 04:08:46 0h:1m:40s+193ms
    Status Timestamp Details
    04:07:06 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    04:07:07 Click on th setting button
    04:07:33 Navigate to the setup wizard
    04:07:34 Click on the 'Sheathing' tab
    04:07:35 Click on the add button
    04:07:37 Enter Test Minimum Cut Length in the sku input field
    04:07:38 Enter Test Minimum Cut Length in the description input field
    04:07:39 Enter 36 in the coverage width input field
    04:07:40 Enter 37.5 in the full width input field
    04:07:41 Enter 0.25 in the thickness input field
    04:07:42 Enter 36 in the maximum length input field
    04:07:43 Click on the save button
    04:07:47 Click on the download button and download excel file
    04:07:48 Verify that that the 'MinimumCut Length' column in the XLSX file is showing and the Minimum Cut Length matches a value of '36'.
    04:07:52 Click on the download button and download csv file
    04:07:55 Verify that the 'Minimum Cut Length' column is shown in the CSV file and the cut length data is matched with '36'.
    04:08:14 Click on the start from scratch
    04:08:26 Click on the 'Porch' tab
    04:08:28 Click on the 'Front Left'
    04:08:29 Click on the apply button
    04:08:41 Click on the 'Drawing' tab
    04:08:43 Click on the ''Sheathing Drawing ROOF_3' tab'
    04:08:43 Verify that the S13 is shorter than the minimum cut length input of 3'
    04:08:44 Click on the 'job review button' tab
    04:08:46 Click on the 'sheathing tab'
    04:08:46 Verify that the Pick length '3' is greater than the Cut Length '1.9947916666666665'
    04:08:46 Test Pass
  • Truss Carrier inputs locked and mixed up

    0h:1m:13s+500ms

    04:09:59 AM
    Truss Carrier inputs locked and mixed up
    2024-12-20 04:09:59 2024-12-20 04:11:12 0h:1m:13s+500ms
    Status Timestamp Details
    04:09:59 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    04:10:15 Click on the start from scratch
    04:10:29 Click on the ''details' tab'
    04:10:30 Click on the 'Truss Carrier tab'
    04:10:38 Select Double from the truss carrier style dropdown
    04:10:43 Select (Auto) from the truss carrier material dropdown
    04:10:53 For Double Element:
    04:10:53 Verify that the truss carrier style field is not grayed out.
    04:11:00 Select Use Top Girt from the truss carrier style dropdown
    04:11:04 Select None from the top girt material dropdown
    04:11:12 For Use Top Girt Element:
    04:11:12 Verify that the truss carrier style field is not grayed out.
    04:11:12 Test Pass
  • Never auto turn on Advanced Post Hole Settings in Advanced Edit

    0h:1m:5s+779ms

    04:12:24 AM
    Never auto turn on Advanced Post Hole Settings in Advanced Edit
    2024-12-20 04:12:24 2024-12-20 04:13:30 0h:1m:5s+779ms
    Status Timestamp Details
    04:12:24 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    04:12:40 Click on the start from scratch
    04:12:52 Click on the opening
    04:12:53 Click on the overhead door
    04:12:55 Click on the Raised Panel
    04:12:58 Click on the 10x10 OHD-no windows
    04:13:00 Apply the Overhead Door on the canvas Building
    04:13:12 Click on the ''details' tab'
    04:13:13 Click on the ''foundation' tab'
    04:13:13 Check the 'Advanced Post Hole Settings Checkbox' checkbox
    04:13:22 Click on the Advanced Post Hole Setting checkbox in the Main Building Page
    04:13:24 Click on the 'advanced edit tab'
    04:13:26 Click on the 'EXT_1 tab'
    04:13:29 Click on the ''details' tab'
    04:13:30 Click on the ''foundation' tab'
    04:13:30 Verify that the Advanced Post Hole Setting checkbox is checked in the Advanced Edit Page
    04:13:30 Test Pass
  • Newly Quoted jobs are shifting the opening up

    0h:2m:22s+583ms

    04:14:41 AM
    Newly Quoted jobs are shifting the opening up
    2024-12-20 04:14:41 2024-12-20 04:17:03 0h:2m:22s+583ms
    Status Timestamp Details
    04:14:41 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    04:14:57 Click on the start from scratch
    04:15:09 Click on the opening
    04:15:10 Click on the walkdoor
    04:15:13 Click on the Solid
    04:15:15 Click on the 3x7 LIS Solid Steel Door
    04:15:16 Click on the change view button
    04:15:16 Click on the Front Left
    04:15:29 Verify that Door is place on the canvas building
    04:15:32 Click on the 'job button' tab
    04:15:32 Enter New Quote Job in the job name field
    04:16:01 Click on the save button
    04:16:02 Click on the 'Make Quote' tab
    04:16:21 Click on the 'yes' button
    04:16:25 Click on the job tab
    04:16:37 open New Quote Job job
    04:16:55 Click on New Quote Job Job View button
    04:16:57 Click on the change view button
    04:17:03 Test FailOpenQA.Selenium.NoSuchElementException : no such element: Unable to locate element: {"method":"xpath","selector":"//div[@id='settingsTab']//label[text()='Sill Height']//following::input[@name='SillHeightStr']"} (Session info: chrome=131.0.6778.140); For documentation on this error, please visit: https://www.selenium.dev/documentation/webdriver/troubleshooting/errors#no-such-element-exception
    04:17:03 base64-img
  • eModeler - Auto Response

    0h:2m:30s+991ms

    04:18:37 AM
    eModeler - Auto Response
    2024-12-20 04:18:37 2024-12-20 04:21:08 0h:2m:30s+991ms
    Status Timestamp Details
    04:18:37 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    04:18:38 Click on th setting button
    04:18:40 Navigate to the distributor page
    04:18:48 Uncheck the Using RTO National checkbox
    04:18:53 Click on the save button
    04:18:54 Click on th setting button
    04:18:56 Navigate to the framing rules
    04:18:58 Click on the AUTOTEST_PHTEST framing rules edit button
    04:19:06 Click on the job tab
    04:19:08 Navigate to Framing Rules Page
    04:19:08 The Email check box is already check
    04:19:09 Click on th setting button
    04:19:13 Navigate to the EModeler page
    04:19:13 Upload the doc file
    04:19:15 The Email check box is already check
    04:19:18 Click on the save button
    04:19:35 Open a new tab with the job link copied from eModeler
    04:19:42 Click on the Submit For Quote
    04:19:47 Enter data in name field
    04:19:48 Enter data in email field
    04:19:51 Click on the Submit For Quote
    04:20:27 Click on the Ok button
    04:20:36 Open new tab and login Gmail account
    04:20:39 Enter username
    04:20:46 Click on the next button
    04:20:51 Enter Password
    04:21:05 Click on the next button
    04:21:08 Verify that the user received the eModeler Building Design email.
    04:21:08 Test Pass
  • Framing materials are not creating from Setting > materials

    0h:6m:26s+016ms

    04:22:36 AM
    Framing materials are not creating from Setting > materials
    2024-12-20 04:22:36 2024-12-20 04:29:02 0h:6m:26s+016ms
    Status Timestamp Details
    04:22:36 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    04:22:38 Click on th setting button
    04:22:41 Navigate to the materials page
    04:22:46 Click on the 'Add' button
    04:22:47 Enter TestFramingField in the SKU field
    04:22:48 Enter 4 in the Supplier Id field
    04:22:48 Enter 5 in the Supplier SKU field
    04:22:49 Enter TestingMaterialPage in the Description field
    04:22:50 Enter 2 in the Dimension 1 field
    04:22:51 Enter 24 in the Dimension 2 field
    04:22:51 Select RedIron from the framing color dropdown
    04:22:51 Select Cee from the framing profile dropdown
    04:22:52 Select DimensionLumber from the framing profile dropdown
    04:22:53 Select Zee from the framing profile dropdown
    04:22:53 Select ZeeRotated from the framing profile dropdown
    04:22:54 Select IBeam from the framing profile dropdown
    04:22:55 Select BackToBackCee from the framing profile dropdown
    04:22:56 Select AngleBracket from the framing profile dropdown
    04:22:56 Select AngleBracketRotated from the framing profile dropdown
    04:22:57 Select ReceiverChannel from the framing profile dropdown
    04:22:58 Select BarJoist from the framing profile dropdown
    04:23:01 Click on the 'Save' button
    04:23:04 Newly create framing material is shown in the Material Page table
    04:23:31 Navigate to Setup Wizard Page
    04:23:32 Click on the 'Framing' tab
    04:23:37 Click on the home icon button
    04:23:43 Click on the shown and hide button
    04:23:44 Uncheck on the all checkbox
    04:23:44 Check on the TrussCarrierMaterial checkbox
    04:23:48 Click on the the Truss Carrier checkbox
    04:24:02 Save the Data in the Setup Wizard
    04:29:02 Test FailOpenQA.Selenium.WebDriverTimeoutException : Timed out after 300 seconds ----> OpenQA.Selenium.NoSuchElementException : no such element: Unable to locate element: {"method":"xpath","selector":"//a[normalize-space()='Start from Scratch']"} (Session info: chrome=131.0.6778.140); For documentation on this error, please visit: https://www.selenium.dev/documentation/webdriver/troubleshooting/errors#no-such-element-exception
    04:29:02 base64-img
  • Mono roof girts missing on face

    0h:1m:14s+409ms

    04:30:32 AM
    Mono roof girts missing on face
    2024-12-20 04:30:32 2024-12-20 04:31:47 0h:1m:14s+409ms
    Status Timestamp Details
    04:30:32 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    04:30:48 Click on the start from scratch
    04:31:01 Click on the 'Building Size' tab
    04:31:03 Set Shed to the 'Roof Style' dropdown
    04:31:05 Click on the ''details' tab'
    04:31:07 Click on the 'Wall Girt Framing tab'
    04:31:11 Select Bypass from the girt style dropdown
    04:31:20 Click on the 'Drawing' tab
    04:31:22 Click on the ''Assembly Drawing EXT_3''
    04:31:23 Click on the 'Truss Carrier tab'
    04:31:30 Select Use Top Girt from the truss carrier style dropdown
    04:31:35 Verify that the Top Girts is applied to the top of the Eave wall
    04:31:35 Verify that the Top Girts is applied to the top of the Eave wall
    04:31:42 Select Double from the truss carrier style dropdown
    04:31:47 Verified that the length of the trusses is not changed after applied the Double Truss Carrier Material
    04:31:47 Test Pass
  • Allow user to define separators in the Job Questions

    0h:1m:33s+590ms

    04:33:15 AM
    Allow user to define separators in the Job Questions
    2024-12-20 04:33:15 2024-12-20 04:34:49 0h:1m:33s+590ms
    Status Timestamp Details
    04:33:15 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    04:33:17 Click on th setting button
    04:33:19 Navigate to the framing rules
    04:33:21 Click on the AUTOTEST_PHTEST framing rules edit button
    04:33:28 Click on the job tab
    04:33:29 Click on the add button
    04:33:33 Select Separator option from the type dropdown
    04:33:35 Enter the Header Line Test in the prompt field
    04:33:36 Click on the save button
    04:33:37 Verify that the new Separator is created
    04:33:41 Click on the preview tab
    04:33:44 Click on the job button from preview frame
    04:33:44 Verify that the new Separator is shown in the Preview iFrame
    04:33:53 Click on the save button
    04:34:12 Click on the start from scratch
    04:34:28 Click on the 'job button' tab
    04:34:28 Verify that the new Separator is shown in the Default Job
    04:34:29 Click on the 'home button'
    04:34:34 Click on the 'No button'
    04:34:36 Click on th setting button
    04:34:38 Navigate to the framing rules
    04:34:40 Click on the AUTOTEST_PHTEST framing rules edit button
    04:34:47 Click on the job tab
    04:34:49 Test Pass
  • When switch to Offset Down, default Height to 0

    0h:1m:20s+872ms

    04:36:16 AM
    When switch to Offset Down, default Height to 0
    2024-12-20 04:36:16 2024-12-20 04:37:36 0h:1m:20s+872ms
    Status Timestamp Details
    04:36:16 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    04:36:33 Click on the start from scratch
    04:36:46 Click on the 'Attached Building' tab
    04:36:54 Set Ceiling Height to the 'Height' dropdown
    04:36:55 Verify that the height field changes to 8' when you select the 'Ceiling Height' from the Height dropdown of Attached Building
    04:37:01 Set Offset Down to the 'Height' dropdown
    04:37:02 Verify that the height field changes to 0' when you select the 'Offset Down' from the Height dropdown of Attached Building
    04:37:08 Set Top of Wall Material to the 'Height' dropdown
    04:37:09 Verify that the height field changes to 8' 6" when you select the 'Top of Wall Material' from the Height dropdown of Attached Building
    04:37:11 Click on the 'Porch' tab
    04:37:13 Click on the 'Custom'
    04:37:20 Set Ceiling Height to the 'Height' dropdown
    04:37:21 Verify that the height field changes to 8' when you select the 'Ceiling Height' from the Height dropdown of Porch
    04:37:27 Set Offset Down to the 'Height' dropdown
    04:37:28 Verify that the height field changes to 0' when you select the 'Offset Down' from the Height dropdown of Porch
    04:37:34 Set Top of Wall Material to the 'Height' dropdown
    04:37:35 Verify that the height field changes to 8' 6" when you select the 'Top of Wall Material' from the Height dropdown of Porch
    04:37:36 Test Pass
  • Door in wrapped porches

    0h:1m:38s+750ms

    04:39:06 AM
    Door in wrapped porches
    2024-12-20 04:39:06 2024-12-20 04:40:45 0h:1m:38s+750ms
    Status Timestamp Details
    04:39:06 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    04:39:10 Click on the job tab
    04:39:22 open Wrapped Porches job
    04:39:40 Click on the opening
    04:39:41 Click on the walkdoor
    04:39:44 Click on the Solid
    04:39:46 Click on the 3x7 LIS Solid Steel Door
    04:40:04 Click on the change view button
    04:40:05 Click on the Front Left
    04:40:10 Click on the 3D edit
    04:40:10 Edit the opening
    04:40:10 get the value of distance = 22' 3 3/4"
    04:40:13 Click on the '2D View' tab
    04:40:13 Double click on the Door name of 2D view Page
    04:40:14 The 3D view and 2D view page of doors distance are same:- '22' 3 3/4"' == '22' 3 3/4"'
    04:40:16 Enter 20 in the Distance field
    04:40:18 Click on the 'Update'
    04:40:20 Click on the Return button
    04:40:22 Click on the yes button
    04:40:40 Click on the change view button
    04:40:40 Click on the Front Left
    04:40:45 After updating the distance in the 2D view, the same distance is displayed in the 3D view.'22' 3 3/4"' == '22' 3 3/4"'
    04:40:45 Test Pass
  • Add New Styles and (icons)

    0h:6m:44s+342ms

    04:42:13 AM
    Add New Styles and (icons)
    2024-12-20 04:42:13 2024-12-20 04:48:57 0h:6m:44s+342ms
    Status Timestamp Details
    04:42:13 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    04:42:14 Click on th setting button
    04:42:39 Navigate to the setup wizard
    04:42:40 Click on the 'WalkDoors' tab
    04:42:45 Click on the 'Windows' tab
    04:43:01 Click on the add button
    04:43:02 Enter Single HungTest in the sku input field
    04:43:03 Enter Single HungTest in the description input field
    04:43:03 Enter 5 in the width input field
    04:43:04 Enter 6 in the width input field
    04:43:07 Select Single Hung from the style dropdown
    04:43:08 Click on the save button
    04:43:09 Click on the add button
    04:43:11 Enter Double HungTest in the sku input field
    04:43:11 Enter Double HungTest in the description input field
    04:43:12 Enter 5 in the width input field
    04:43:12 Enter 6 in the width input field
    04:43:16 Select Double Hung from the style dropdown
    04:43:16 Click on the save button
    04:43:18 Click on the add button
    04:43:19 Enter VentTest in the sku input field
    04:43:20 Enter VentTest in the description input field
    04:43:20 Enter 5 in the width input field
    04:43:21 Enter 6 in the width input field
    04:43:24 Select Vent from the style dropdown
    04:43:25 Click on the save button
    04:43:27 Click on the add button
    04:43:28 Enter OtherTest in the sku input field
    04:43:28 Enter OtherTest in the description input field
    04:43:29 Enter 5 in the width input field
    04:43:29 Enter 6 in the width input field
    04:43:33 Select Other from the style dropdown
    04:43:34 Click on the save button
    04:43:35 Click on the 'WalkDoors' tab
    04:43:36 Click on the add button
    04:43:38 Enter OtherTestDoor in the sku input field
    04:43:38 Enter OtherTestDoor in the description input field
    04:43:39 Enter 5 in the width input field
    04:43:39 Enter 6 in the width input field
    04:43:43 Select Other from the style dropdown
    04:43:43 Click on the save button
    04:43:57 Save the Data in the Setup Wizard
    04:48:57 Test FailOpenQA.Selenium.WebDriverTimeoutException : Timed out after 300 seconds ----> OpenQA.Selenium.NoSuchElementException : no such element: Unable to locate element: {"method":"xpath","selector":"//a[normalize-space()='Start from Scratch']"} (Session info: chrome=131.0.6778.140); For documentation on this error, please visit: https://www.selenium.dev/documentation/webdriver/troubleshooting/errors#no-such-element-exception
    04:48:57 base64-img
  • If delete material from assembly then warn user

    0h:1m:36s+037ms

    04:50:28 AM
    If delete material from assembly then warn user
    2024-12-20 04:50:28 2024-12-20 04:52:04 0h:1m:36s+037ms
    Status Timestamp Details
    04:50:28 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    04:50:30 Click on th setting button
    04:50:56 Navigate to the setup wizard
    04:50:58 Click on the 'Fasteners' tab
    04:51:03 Click on the 'Sheathing Assemblies' tab
    04:51:08 Click on the 'Sheathing' tab
    04:51:16 Click on the add button
    04:51:18 Enter KDTest456 in the sku input field
    04:51:18 Enter TestMaterialKD in the description input field
    04:51:20 Enter 36 in the coverage width input field
    04:51:21 Enter 36 in the full width input field
    04:51:22 Enter 0.25 in the thickness input field
    04:51:25 Select Brick Texture element from color map dropdown
    04:51:29 Select Brick element from bump map dropdown
    04:51:31 Select Roof Material element from usage table
    04:51:33 Enter the cost in the pricings table
    04:51:35 Enter the price in the pricings table
    04:51:37 Click on the save button
    04:51:38 Click on the 'Fasteners' tab
    04:51:40 Click on the add button
    04:51:42 Enter KDMaterialFastener in the sku input field
    04:51:42 Enter TestKD in the description input field
    04:51:44 Enter the cost in the pricings table
    04:51:46 Enter the price in the pricings table
    04:51:48 Click on the save button
    04:51:49 Click on the 'Sheathing Assemblies' tab
    04:51:51 Click on the add button
    04:51:51 Enter Test SheathingAssemblies0673 in the name input field
    04:51:56 Select TestMaterialKD from the primary dropdown
    04:51:57 Click on the 'Add New' button
    04:52:01 Select Fastener from the type dropdown
    04:52:04 Test Fail Accessories is not shown in the dropdown Expected: False But was: True
    04:52:04 base64-img
  • Header High boundaries

    0h:1m:23s+260ms

    04:53:37 AM
    Header High boundaries
    2024-12-20 04:53:37 2024-12-20 04:55:00 0h:1m:23s+260ms
    Status Timestamp Details
    04:53:37 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    04:53:54 Click on the start from scratch
    04:54:07 Click on the opening
    04:54:08 Click on the overhead door
    04:54:10 Click on the Raised Panel
    04:54:12 Click on the 10x10 OHD-no windows
    04:54:19 Click on the 'door and window tab'
    04:54:20 Click on the 'overhead door post framing tab'
    04:54:21 Check the 'Header High' checkbox
    04:54:28 Select Inside of Post from the Header High boundaries dropdown
    04:54:37 Click on the 'Drawing' tab
    04:54:39 Click on the ''Assembly Drawing EXT_1''
    04:54:41 Verify that the Inside of post material is apply on the Canvas building
    04:54:45 Select Outside of Post from the Header High boundaries dropdown
    04:54:51 Verify that the Outside of post material is apply on the Canvas building
    04:54:55 Select Next Column from the Header High boundaries dropdown
    04:55:00 Verify that the Next Column material is apply on the Canvas building
    04:55:00 Test Pass
  • Header High Triple and Quadruple not working

    0h:1m:12s+737ms

    04:56:31 AM
    Header High Triple and Quadruple not working
    2024-12-20 04:56:31 2024-12-20 04:57:43 0h:1m:12s+737ms
    Status Timestamp Details
    04:56:31 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    04:56:47 Click on the start from scratch
    04:57:00 Click on the ''Open Wall' tab'
    04:57:10 Open any wall from canvas building
    04:57:12 Click on the ''details' tab'
    04:57:13 Click on the 'Truss Carrier tab'
    04:57:15 Click on the 'Drawing' tab
    04:57:16 Click on the ''Assembly Drawing EXT_3''
    04:57:23 Select Triple from the truss carrier style dropdown
    04:57:33 Verify that the TrussBearer quantity is 3' after selecting Triple from the Truss Carrier Style dropdown
    04:57:40 Select Quadruple from the truss carrier style dropdown
    04:57:43 Verify that the TrussBearer quantity is 4' after selecting Quadruple from the Truss Carrier Style dropdown
    04:57:43 Test Pass
  • Match Post is Broken with Auto

    0h:0m:50s+616ms

    04:59:14 AM
    Match Post is Broken with Auto
    2024-12-20 04:59:14 2024-12-20 05:00:05 0h:0m:50s+616ms
    Status Timestamp Details
    04:59:14 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    04:59:30 Click on the start from scratch
    04:59:40 Click on the opening
    04:59:41 Click on the overhead door
    04:59:44 Click on the All
    04:59:46 Click on the 10x10 OHD-no windows
    04:59:52 Click on the ''details' tab'
    04:59:53 Click on the 'wall framing tab'
    04:59:57 Select (Auto) element from the post material dropdown
    05:00:00 Click on the 'door and window tab'
    05:00:01 Click on the 'overhead door post framing tab'
    05:00:04 Test Fail (Match Post) is not shown in the dropdown Expected: False But was: True
    05:00:05 base64-img
  • HOT PATCH - Reflect Panel Length changes in Drawing Outputs

    0h:2m:14s+560ms

    05:01:51 AM
    HOT PATCH - Reflect Panel Length changes in Drawing Outputs
    2024-12-20 05:01:51 2024-12-20 05:04:06 0h:2m:14s+560ms
    Status Timestamp Details
    05:02:02 Click on the job tab
    05:02:13 open Reflect Panel Length job
    05:02:27 Click on the Prep for Order button
    05:02:36 Click on the Yes pop of button
    05:02:44 Click on the Drawings button
    05:02:46 Click on the ROOF-15 button
    05:02:56 Edit the length from the Drawing
    05:03:16 Click on the save button
    05:03:17 Click on the 'job review button' tab
    05:03:18 Click on the 'Cladding tab'
    05:03:23 Verify that the cladding length(Job Review) is updated after the roof length(Drawing) has been changed.
    05:03:24 Click on the ''Canvas 3D View'' tab
    05:03:27 Click on the Outputs button of default job
    05:03:38 Click on the Roof Layout, Roof Report, and Cladding Drawing checkbox
    05:03:48 Verify that the length data 3' has been updated in the PDF file. Drawing Roof-15 data and Cladding data are matched ExteriorRoof 36"- AG Panel 2 3'
    05:03:50 Click on the Unlock button
    05:03:58 Click on the Yes pop of button
    05:04:06 Test Pass
  • Stop Rounding {LF} in SKU builder

    0h:6m:16s+477ms

    05:06:02 AM
    Stop Rounding {LF} in SKU builder
    2024-12-20 05:06:02 2024-12-20 05:12:18 0h:6m:16s+477ms
    Status Timestamp Details
    05:06:02 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    05:06:03 Click on th setting button
    05:06:32 Navigate to the setup wizard
    05:06:34 Click on the 'Trim' tab
    05:06:39 Click on the add button
    05:06:41 Enter KDRC in the sku input field
    05:06:41 Enter Ridge Cap Test 56 in the description input field
    05:06:42 Enter 5 in the width input field
    05:06:42 Enter 6 in the width input field
    05:06:44 Select Ridge Cap - Roof Trim element from usage table
    05:06:46 Enter the cost in the pricings table
    05:06:48 Enter the price in the pricings table
    05:07:03 Enter the cost in the pricings table
    05:07:03 Click on the save button
    05:07:18 Save the Data in the Setup Wizard
    05:12:18 Test FailOpenQA.Selenium.WebDriverTimeoutException : Timed out after 300 seconds ----> OpenQA.Selenium.NoSuchElementException : no such element: Unable to locate element: {"method":"xpath","selector":"//a[normalize-space()='Start from Scratch']"} (Session info: chrome=131.0.6778.140); For documentation on this error, please visit: https://www.selenium.dev/documentation/webdriver/troubleshooting/errors#no-such-element-exception
    05:12:18 base64-img
  • Add the Soffit and Fascia colors selectors to the Main Building job tab Colors drop down

    0h:1m:49s+540ms

    05:14:13 AM
    Add the Soffit and Fascia colors selectors to the Main Building job tab Colors drop down
    2024-12-20 05:14:13 2024-12-20 05:16:03 0h:1m:49s+540ms
    Status Timestamp Details
    05:14:13 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    05:14:39 Click on the start from scratch
    05:14:51 Click on the 'Building Size' tab
    05:14:57 Set 2' to the 'overhang' dropdown
    05:14:58 Click on the 'Colors' tab
    05:15:00 Click on the 'accent color 3 dropdown'
    05:15:02 Set BRIGHT RED on the accent color 3 dropdown
    05:15:13 Click on the 'accent color 4 dropdown'
    05:15:15 Set BRIGHT WHITE on the accent color 4 dropdown
    05:15:27 Click on the ''details' tab'
    05:15:29 Click on the 'Fascia And Soffit'
    05:15:34 Select Accent Color 3 from the eave fascia color dropdown
    05:15:38 Select J Hagerman Eave Trim from the gable fascia material dropdown
    05:15:42 Select Accent Color 4 from the gable fascia color dropdown
    05:15:46 Select Panels from the soffit style dropdown
    05:15:50 Select 29ga 9/38 Tuff Rib from the eave soffit material dropdown
    05:15:55 Select Accent Color 3 from the eave soffit color dropdown
    05:15:59 Select Single Shingle from the gable soffit material dropdown
    05:16:02 Test Fail Accent Color 4 is not shown in the dropdown Expected: False But was: True
    05:16:03 base64-img
  • Zombie Parts keep returning to the Materials List after they have been deleted

    0h:2m:43s+451ms

    05:17:49 AM
    Zombie Parts keep returning to the Materials List after they have been deleted
    2024-12-20 05:17:49 2024-12-20 05:20:32 0h:2m:43s+451ms
    Status Timestamp Details
    05:17:59 Click on the job tab
    05:18:11 open Zombie Parts job
    05:18:18 Click on the 'job review button' tab
    05:18:19 Click on the 'Trim tab'
    05:18:21 Click on the Add Misc button
    05:18:22 Enter the data in the usage field of Misc pop-up
    05:18:22 Enter the data in the Sku field of Misc pop-up
    05:18:23 Enter the data in the Material field of Misc pop-up
    05:18:23 Enter the data in the Cost field of Misc pop-up
    05:18:24 Enter the data in the price field of Misc pop-up
    05:18:24 Click on the Save button of Catalog pop-up
    05:18:30 Click on the Add Catalog button
    05:18:32 Enter the data in the usage field of Catalog pop-up
    05:18:32 Click on the Save button of Catalog pop-up
    05:18:56 Click on the save button
    05:18:58 Click on the 'job review button' tab
    05:18:59 Click on the 'Trim tab'
    05:19:03 Verify that the new Catalog and Usage material are shown on the Trim table
    05:19:20 Delete the new Testing Catalog Element material from the Trim table
    05:19:37 Delete the new Testing Usage Misc Element material from the Trim table
    05:19:38 Click on the ''Canvas 3D View'' tab
    05:19:57 Click on the save button
    05:19:59 Click on the 'Job List' button'
    05:20:09 open Zombie Parts job
    05:20:23 Click on the 'job review button' tab
    05:20:24 Click on the 'Trim tab'
    05:20:24 Verify that the newly created Catalog item is deleted from the trim table.
    05:20:24 Verify that the newly created Catalog item is deleted from the trim table.
    05:20:32 Test Pass
  • HOT PATCH - Interior wall width is zero on input

    0h:1m:23s+475ms

    05:22:27 AM
    HOT PATCH - Interior wall width is zero on input
    2024-12-20 05:22:27 2024-12-20 05:23:51 0h:1m:23s+475ms
    Status Timestamp Details
    05:22:27 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    05:22:43 Click on the start from scratch
    05:22:57 Click on the 'Wall Liner' tab
    05:22:57 Check the 'Has Liner Panel' checkbox
    05:23:07 Check the 'Has Interior Wainscot' checkbox
    05:23:17 Click on the change view button
    05:23:18 Click on the Front Left
    05:23:20 Click on the '2D View' tab
    05:23:21 Click on the 'Interior Wall'
    05:23:23 Click on the 'Add Room' tab
    05:23:24 Place Room in the 2D view
    05:23:27 Get the data of Side A and Side B element
    05:23:31 Click on the Return button
    05:23:34 Click on the yes button
    05:23:48 Click on the '2D View' tab
    05:23:49 Click on the 'Interior Wall'
    05:23:51 Verify that Side A and Side B elements are not changed after saving data in the 2D view.
    05:23:51 Test Pass
  • Auto on Cross Section when quoted

    0h:6m:40s+200ms

    05:25:41 AM
    Auto on Cross Section when quoted
    2024-12-20 05:25:41 2024-12-20 05:32:21 0h:6m:40s+200ms
    Status Timestamp Details
    05:25:41 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    05:25:57 Click on the start from scratch
    05:26:12 Click on the ''details' tab'
    05:26:15 Click on the 'Truss Carrier tab'
    05:26:23 Select Use Top Girt from the truss carrier style dropdown
    05:26:27 Select None from the top girt material dropdown
    05:26:34 Select Double from the truss carrier style dropdown
    05:26:38 Select (Auto) from the truss carrier material dropdown
    05:26:40 Click on the 'job button' tab
    05:26:41 Enter PFS-4229 in the job name field
    05:27:17 Click on the save button
    05:27:19 Click on the outputs button
    05:27:20 Check the Cross Sections checkbox
    05:27:46 Click on the download button
    05:27:51 Download the Cross Sections' PDF File
    05:27:51 Verify PDF File is download
    05:27:56 The Job Status is New:Verify that the Exterior Carrier and Interior Carrier Materials are not showing as ‘Auto’
    05:27:57 Click on the 'Make Quote' tab
    05:28:18 Click on the 'yes' button
    05:28:23 Click on the job tab
    05:28:33 open PFS-4229 job
    05:28:52 Click on the outputs button
    05:28:54 Check the Cross Sections checkbox
    05:29:02 Click on the download button
    05:29:07 Download the Cross Sections' PDF File
    05:29:08 Verify PDF File is download
    05:29:13 The Job Status is Quoted :Verify that the Exterior Carrier and Interior Carrier Material are not changed.
    05:29:14 Click on the 'Make Contract' tab
    05:29:22 Click on the 'yes' button
    05:29:26 Click on the job tab
    05:29:36 open PFS-4229 job
    05:29:55 Click on the outputs button
    05:29:56 Check the Cross Sections checkbox
    05:30:05 Click on the download button
    05:30:11 Download the Cross Sections' PDF File
    05:30:11 Verify PDF File is download
    05:30:16 The Job Status is Make Contract :Verify that the Exterior Carrier and Interior Carrier Material are not changed.
    05:30:17 Click on the 'Prep for Order' tab
    05:30:27 Click on the 'yes' button
    05:30:31 Click on the job tab
    05:30:42 open PFS-4229 job
    05:31:01 Click on the outputs button
    05:31:03 Check the Cross Sections checkbox
    05:31:09 Click on the download button
    05:31:14 Download the Cross Sections' PDF File
    05:31:14 Verify PDF File is download
    05:31:19 The Job Status is Prep for Order :Verify that the Exterior Carrier and Interior Carrier Material are not changed.
    05:31:21 Click on the 'Make Order' tab
    05:31:29 Click on the 'yes' button
    05:31:33 Click on the job tab
    05:31:44 open PFS-4229 job
    05:32:02 Click on the outputs button
    05:32:03 Check the Cross Sections checkbox
    05:32:11 Click on the download button
    05:32:16 Download the Cross Sections' PDF File
    05:32:16 Verify PDF File is download
    05:32:21 The Job Status is Ordered :Verify that the Exterior Carrier and Interior Carrier Material are not changed.
    05:32:21 Test Pass
  • Overhang of main building is getting removed from one side

    0h:1m:52s+554ms

    05:34:12 AM
    Overhang of main building is getting removed from one side
    2024-12-20 05:34:12 2024-12-20 05:36:04 0h:1m:52s+554ms
    Status Timestamp Details
    05:34:12 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    05:34:36 Click on the start from scratch
    05:34:49 Click on the 'Attached Building' tab
    05:34:50 Enter 0 in the start field
    05:34:51 Enter 40 in the length field
    05:34:52 Enter 30 in the width field
    05:34:58 Set Offset Down to the 'Height' dropdown
    05:35:02 Set Rotated to the 'Roof Orientation' dropdown
    05:35:16 Click on the 'advanced edit tab'
    05:35:18 Click on the 'EXT_2 tab'
    05:35:23 Click on the 'EXT_4 tab'
    05:35:31 Click on the ''Canvas 3D View'' tab
    05:35:34 Click on the 'Main Building Tab'
    05:35:36 Click on the 'Building Size' tab
    05:35:41 Set 2' to the 'overhang' dropdown
    05:35:54 Click on the 'advanced edit tab'
    05:35:56 Click on the 'EXT_2 tab'
    05:36:01 Click on the 'EXT_4 tab'
    05:36:04 Test Pass
  • Sliding door colors when sill height is greater than zero

    0h:1m:22s+214ms

    05:37:55 AM
    Sliding door colors when sill height is greater than zero
    2024-12-20 05:37:55 2024-12-20 05:39:17 0h:1m:22s+214ms
    Status Timestamp Details
    05:37:55 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    05:38:11 Click on the start from scratch
    05:38:21 Click on the opening
    05:38:22 Click on the Slider
    05:38:25 Click on the Select A Style
    05:38:28 Click on the Select Standard Slider
    05:38:44 Enter 1 in the Sill Height field
    05:38:45 Click on the 'Update'
    05:38:53 Click on the change view button
    05:38:53 Click on the Left Elevation
    05:38:58 Click on the 'advanced edit tab'
    05:38:59 Click on the SLD-1 tab
    05:39:00 Click on the 'Colors' tab
    05:39:02 Click on the 'wall color dropdown'
    05:39:04 Set BRIGHT RED on the wall color dropdown
    05:39:13 Click on the ''Canvas 3D View'' tab
    05:39:15 Click on the change view button
    05:39:15 Click on the Left Elevation
    05:39:17 Verify that the Slider color is change
    05:39:17 Test Pass
  • Dev: Change how we track openings (server changes)

    0h:6m:3s+671ms

    05:41:08 AM
    Dev: Change how we track openings (server changes)
    2024-12-20 05:41:08 2024-12-20 05:47:11 0h:6m:3s+671ms
    Status Timestamp Details
    05:41:08 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    05:41:24 Click on the start from scratch
    05:41:35 Click on the opening
    05:41:36 Click on the walkdoor
    05:41:39 Click on the Solid
    05:41:41 Click on the 3x7 LIS Solid Steel Door
    05:41:42 Click on the change view button
    05:41:42 Click on the Front Right
    05:42:06 Click on the change view button
    05:47:11 Test FailOpenQA.Selenium.WebDriverTimeoutException : Timed out after 300 seconds ----> OpenQA.Selenium.NoSuchElementException : no such element: Unable to locate element: {"method":"xpath","selector":"//div[@id='w2ui-popup']//label[text()='Location']//following::input[@name='LocationSel']"} (Session info: chrome=131.0.6778.140); For documentation on this error, please visit: https://www.selenium.dev/documentation/webdriver/troubleshooting/errors#no-such-element-exception
    05:47:11 base64-img
  • 2d Ceiling Product System not working

    0h:1m:38s+043ms

    05:49:02 AM
    2d Ceiling Product System not working
    2024-12-20 05:49:02 2024-12-20 05:50:40 0h:1m:38s+043ms
    Status Timestamp Details
    05:49:02 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    05:49:18 Click on the start from scratch
    05:49:29 Click on the '2D View' tab
    05:49:30 Click on the 'Lofts'
    05:49:31 Click on the 'Add Button' tab
    05:49:35 Select Ceiling Product System from the ceiling product system dropdown
    05:49:41 Select Sheathing Ceiling M1 from the ceiling material dropdown
    05:49:41 Check the 'Has Ceiling' checkbox
    05:49:46 Click on the 'Add Button' tab
    05:49:50 Select Ceiling Product System from the ceiling product system dropdown
    05:49:55 Select Sheathing Ceiling M2 from the ceiling material dropdown
    05:49:55 Check the 'Has Ceiling' checkbox
    05:50:01 Click on the Return button
    05:50:03 Click on the yes button
    05:50:24 Click on the 'roof button'
    05:50:28 Click on the 'advanced edit tab'
    05:50:30 Click on the 'LOFT_1 tab'
    05:50:34 Click on the ''Product System' tab'
    05:50:36 Click on the 'LOFT_1 tab'
    05:50:40 Click on the ''Product System' tab'
    05:50:40 Test Pass
  • Opening Styles are not being copied with Create distributor

    0h:8m:26s+771ms

    05:52:30 AM
    Opening Styles are not being copied with Create distributor
    2024-12-20 05:52:30 2024-12-20 06:00:57 0h:8m:26s+771ms
    Status Timestamp Details
    05:52:30 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    05:52:32 Click on th setting button
    05:52:57 Navigate to the setup wizard
    05:52:58 Click on the 'WalkDoors' tab
    05:53:18 Click on the add button
    05:53:19 Enter SolidDoor in the sku input field
    05:53:20 Enter SolidDoor in the description input field
    05:53:20 Enter 5 in the width input field
    05:53:21 Enter 6 in the width input field
    05:53:26 Select Solid from the style dropdown
    05:53:27 Click on the save button
    05:53:30 Click on the add button
    05:53:31 Enter PanelDoor in the sku input field
    05:53:32 Enter PanelDoor in the description input field
    05:53:32 Enter 5 in the width input field
    05:53:33 Enter 6 in the width input field
    05:53:37 Select Panel from the style dropdown
    05:53:39 Click on the save button
    05:53:42 Click on the add button
    05:53:43 Enter CommercialDoor in the sku input field
    05:53:44 Enter CommercialDoor in the description input field
    05:53:44 Enter 5 in the width input field
    05:53:45 Enter 6 in the width input field
    05:53:50 Select Commercial from the style dropdown
    05:53:51 Click on the save button
    05:53:54 Click on the add button
    05:53:55 Enter PatioDoor in the sku input field
    05:53:56 Enter PatioDoor in the description input field
    05:53:56 Enter 5 in the width input field
    05:53:57 Enter 6 in the width input field
    05:54:01 Select Patio from the style dropdown
    05:54:03 Click on the save button
    05:54:06 Click on the add button
    05:54:07 Enter OtherDoor in the sku input field
    05:54:08 Enter OtherDoor in the description input field
    05:54:08 Enter 5 in the width input field
    05:54:09 Enter 6 in the width input field
    05:54:13 Select Other from the style dropdown
    05:54:15 Click on the save button
    05:54:30 Save the Data in the Setup Wizard
    05:54:31 Click on th setting button
    05:54:56 Navigate to the setup wizard
    05:54:58 Click on the 'WalkDoors' tab
    05:55:02 Click on the download button and download excel file
    05:55:03 Click on th setting button
    05:55:05 Navigate to the distributor page
    05:55:11 Click on the add distributor button
    05:55:12 Click on the add post frame button
    05:55:14 Enter Copy KD Distributor Distributor Name
    05:55:14 Select AUTOTEST_PHTEST distributor from the source distributor dropdown
    05:55:16 Click on the add create button
    05:55:37 Click on the start from scratch
    05:55:46 Click on the opening
    05:55:47 Click on the walkdoor
    06:00:57 Test FailOpenQA.Selenium.WebDriverTimeoutException : Timed out after 300 seconds ----> OpenQA.Selenium.NoSuchElementException : no such element: Unable to locate element: {"method":"xpath","selector":"//div[@id='style-image-Other']"} (Session info: chrome=131.0.6778.140); For documentation on this error, please visit: https://www.selenium.dev/documentation/webdriver/troubleshooting/errors#no-such-element-exception
    06:00:57 base64-img
  • Delete newly create distributor

    0h:5m:9s+461ms

    06:01:07 AM
    Delete newly create distributor
    2024-12-20 06:01:07 2024-12-20 06:06:16 0h:5m:9s+461ms
    Status Timestamp Details
    06:01:07 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    06:01:08 Click on th setting button
    06:01:10 Navigate to the distributor page
    06:06:16 Test FailOpenQA.Selenium.WebDriverTimeoutException : Timed out after 300 seconds ----> OpenQA.Selenium.NoSuchElementException : no such element: Unable to locate element: {"method":"xpath","selector":"//span[@class='w2ui-marker']"} (Session info: chrome=131.0.6778.140); For documentation on this error, please visit: https://www.selenium.dev/documentation/webdriver/troubleshooting/errors#no-such-element-exception
    06:06:16 base64-img
  • Ceiling height shows different on the summary sheet than in the system

    0h:1m:41s+519ms

    06:08:07 AM
    Ceiling height shows different on the summary sheet than in the system
    2024-12-20 06:08:07 2024-12-20 06:09:49 0h:1m:41s+519ms
    Status Timestamp Details
    06:08:07 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    06:08:23 Click on the start from scratch
    06:08:34 Click on the 'Building Size' tab
    06:08:36 Enter 30' 6" in the width field
    06:08:37 Enter 50' 6" in the length field
    06:08:39 Set Top Of Wall Material to the 'Roof Height Style' dropdown
    06:08:40 Enter 16' 6" in the exterior metal height field
    06:08:43 Set Gambrel to the 'Roof Style' dropdown
    06:08:49 Set 1' to the 'overhang' dropdown
    06:08:51 Click on the 'job button' tab
    06:08:52 Enter PFS-4303 in the job name field
    06:09:23 Click on the save button
    06:09:25 Click on the outputs button
    06:09:26 Check the Summary Sheet checkbox
    06:09:47 Click on the download button
    06:09:48 Verify PDF File is download
    06:09:48 In the summary sheet PDF file shows the correct data of Name :PFS-4303
    06:09:48 In the summary sheet PDF file shows the correct data of Width :30' 6"
    06:09:48 In the summary sheet PDF file shows the correct data of Length :50' 6"
    06:09:48 In the summary sheet PDF file shows the correct data of Exterior Metal Height :16' 6"
    06:09:48 Test FailIn the summary sheet PDF file, the data is incorrect of Roof Low Pitch :16/12
    06:09:49 base64-img
  • Test PA-82

    0h:1m:31s+963ms

    06:11:39 AM
    Test PA-82
    2024-12-20 06:11:39 2024-12-20 06:13:11 0h:1m:31s+963ms
    Status Timestamp Details
    06:11:39 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    06:11:40 Click on th setting button
    06:11:43 Navigate to the materials page
    06:11:45 Click on the edit button for the W8X10 in material page table
    06:11:45 Fetch the supplier SKU of W8X10 material
    06:11:45 Fetch the supplier Description of W8X10 material
    06:11:45 Fetch the supplier ID of the W8X10
    06:11:50 Click on the edit button for the T1-11 in material page table
    06:11:50 Fetch the supplier SKU of T1-11 material
    06:11:50 Fetch the supplier Description of T1-11 material
    06:11:50 Fetch the supplier ID of the T1-11
    06:11:54 Click on the edit button for the SupSku3 in material page table
    06:11:54 Fetch the supplier SKU of SupSku3 material
    06:11:54 Fetch the supplier Description of SupSku3 material
    06:11:54 Fetch the supplier ID of the SupSku3
    06:12:00 Click on the job tab
    06:12:11 open 3560 T-1 job
    06:12:31 Click on the outputs button
    06:12:49 Download the PDF file for Job Bid Supplier ID 1, 2, 3
    06:12:57 Verify PDF File is download
    06:12:57 Verified the Framing material data in the PDF file
    06:12:57 Verify PDF File is download
    06:12:57 Verified the Sheathing material data in the PDF file
    06:12:57 Verify PDF File is download
    06:12:57 Verified the Trim material data in the PDF file
    06:13:02 Click on th setting button
    06:13:04 Navigate to the materials page
    06:13:08 Verify the supplied ID of the Job Bid (Supplier ID 1) in the output page
    06:13:09 Verify the supplied ID of the Job Bid (Supplier ID 2) in the output page
    06:13:10 Verify the supplied ID of the Job Bid (Supplier ID 3) in the output page
    06:13:11 Test Pass
  • PFS-3237

    0h:24m:25s+991ms

    06:15:01 AM
    PFS-3237
    2024-12-20 06:15:01 2024-12-20 06:39:27 0h:24m:25s+991ms
    Status Timestamp Details
    06:15:01 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    06:15:03 Click on th setting button
    06:15:06 Navigate to the framing rules
    06:15:08 Click on the AUTOTEST_PHTEST framing rules edit button
    06:15:15 Click on the details tab
    06:15:16 The -- Bays -- Menu lists
    06:15:18 Select Bay Spacing from 2 dropdown
    06:15:19 The -- Bays -- Menu lists
    06:15:21 Select Bay Placement from 2 dropdown
    06:15:31 The -- Foundation -- Menu lists
    06:15:32 Select Type from 2 dropdown
    06:15:34 The -- Foundation -- Menu lists
    06:15:36 Select Fastener from 2 dropdown
    06:15:37 The -- Foundation -- Menu lists
    06:15:39 Select Base from 2 dropdown
    06:15:41 The -- Foundation -- Menu lists
    06:15:42 Select Uplift from 2 dropdown
    06:15:44 The -- Foundation -- Menu lists
    06:15:45 Select Eave Fastener from 2 dropdown
    06:15:47 The -- Foundation -- Menu lists
    06:15:48 Select Eave Base from 2 dropdown
    06:15:50 The -- Foundation -- Menu lists
    06:15:52 Select Eave Uplift from 2 dropdown
    06:15:53 The -- Foundation -- Menu lists
    06:15:55 Select Gable Base from 2 dropdown
    06:15:57 The -- Foundation -- Menu lists
    06:15:58 Select Gable Uplift from 2 dropdown
    06:16:00 The -- Foundation -- Menu lists
    06:16:01 Select Left Corner Fastener from 2 dropdown
    06:16:03 The -- Foundation -- Menu lists
    06:16:04 Select Left Corner Base from 2 dropdown
    06:16:06 The -- Foundation -- Menu lists
    06:16:08 Select Left Corner Uplift from 2 dropdown
    06:16:09 The -- Foundation -- Menu lists
    06:16:11 Select Right Corner Fastener from 2 dropdown
    06:16:13 The -- Foundation -- Menu lists
    06:16:14 Select Right Corner Base from 2 dropdown
    06:16:16 The -- Foundation -- Menu lists
    06:16:17 Select Right Corner Uplift from 2 dropdown
    06:16:19 The -- Foundation -- Menu lists
    06:16:21 Select Jamb Post Fastener from 2 dropdown
    06:16:22 The -- Foundation -- Menu lists
    06:16:24 Select Jamb Post Base from 2 dropdown
    06:16:26 The -- Foundation -- Menu lists
    06:16:27 Select Jamb Post Uplift from 2 dropdown
    06:17:49 The -- Wall Framing -- Menu lists
    06:17:50 Select Wall Framing from 2 dropdown
    06:17:52 The -- Wall Framing -- Menu lists
    06:17:54 Select Interior Wall Framing from 2 dropdown
    06:17:55 The -- Wall Framing -- Menu lists
    06:17:57 Select Gable Wall Style from 2 dropdown
    06:17:58 The -- Wall Framing -- Menu lists
    06:18:00 Select Post Material from 2 dropdown
    06:18:02 The -- Wall Framing -- Menu lists
    06:18:05 Select Gable Post Material from 2 dropdown
    06:18:07 The -- Wall Framing -- Menu lists
    06:18:08 Select Open Wall Post Material from 2 dropdown
    06:18:10 The -- Wall Framing -- Menu lists
    06:18:11 Select Top of Eave Post from 2 dropdown
    06:18:13 The -- Wall Framing -- Menu lists
    06:18:14 Select Eave Post Spacing from 2 dropdown
    06:18:16 The -- Wall Framing -- Menu lists
    06:18:18 Select Eave Post Placement from 2 dropdown
    06:18:19 The -- Wall Framing -- Menu lists
    06:18:21 Select Gable Post Spacing from 2 dropdown
    06:18:23 The -- Wall Framing -- Menu lists
    06:18:24 Select Gable Post Placement from 2 dropdown
    06:18:26 The -- Wall Framing -- Menu lists
    06:18:27 Select Shed Post Spacing from 2 dropdown
    06:18:29 The -- Wall Framing -- Menu lists
    06:18:31 Select Shed Post Placement from 2 dropdown
    06:18:32 The -- Wall Framing -- Menu lists
    06:18:34 Select Corner Post Placement from 2 dropdown
    06:18:36 The -- Wall Framing -- Menu lists
    06:18:37 Select Corner Post Material from 2 dropdown
    06:18:45 The -- Truss Carrier -- Menu lists
    06:18:46 Select Truss Carrier Style from 2 dropdown
    06:18:48 The -- Truss Carrier -- Menu lists
    06:18:50 Select Truss Carrier Material from 2 dropdown
    06:18:51 The -- Truss Carrier -- Menu lists
    06:18:53 Select Top Girt Material from 2 dropdown
    06:19:04 The -- Open Wall Truss Carrier -- Menu lists
    06:19:05 Select Truss Carrier Style from 2 dropdown
    06:19:07 The -- Open Wall Truss Carrier -- Menu lists
    06:19:08 Select Open Wall Truss Carrier Material from 2 dropdown
    06:19:10 The -- Open Wall Truss Carrier -- Menu lists
    06:19:12 Select Open Wall Carrier Bay Span from 2 dropdown
    06:19:13 The -- Open Wall Truss Carrier -- Menu lists
    06:19:15 Select Open Wall Top Girt Material from 2 dropdown
    06:19:24 The -- Wall Girt Framing -- Menu lists
    06:19:25 Select Girt Style from 2 dropdown
    06:19:27 The -- Wall Girt Framing -- Menu lists
    06:19:28 Select Girt Material from 2 dropdown
    06:19:30 The -- Wall Girt Framing -- Menu lists
    06:19:32 Select Girt Spacing from 2 dropdown
    06:19:33 The -- Wall Girt Framing -- Menu lists
    06:19:35 Select Wainscot Girt from 2 dropdown
    06:19:37 The -- Wall Girt Framing -- Menu lists
    06:19:38 Select Wainscot Girt Backer from 2 dropdown
    06:19:40 The -- Wall Girt Framing -- Menu lists
    06:19:41 Select Girt Corner from 2 dropdown
    06:19:53 The -- Skirt Boards -- Menu lists
    06:19:55 Select Skirt Board Material from 2 dropdown
    06:19:57 The -- Skirt Boards -- Menu lists
    06:19:58 Select Skirt Board Alignment from 2 dropdown
    06:20:00 The -- Skirt Boards -- Menu lists
    06:20:01 Select Cut Skirt Board at Walk Doors from 2 dropdown
    06:20:13 The -- Exterior Stud Framing -- Menu lists
    06:20:15 Select Stud Material from 2 dropdown
    06:20:17 The -- Exterior Stud Framing -- Menu lists
    06:20:18 Select Stud Spacing from 2 dropdown
    06:20:20 The -- Exterior Stud Framing -- Menu lists
    06:20:22 Select Top Plate from 2 dropdown
    06:20:23 The -- Exterior Stud Framing -- Menu lists
    06:20:25 Select Very Top Plate from 2 dropdown
    06:20:26 The -- Exterior Stud Framing -- Menu lists
    06:20:28 Select Bottom Plate from 2 dropdown
    06:20:30 The -- Exterior Stud Framing -- Menu lists
    06:20:31 Select Very Bottom Plate from 2 dropdown
    06:20:33 The -- Exterior Stud Framing -- Menu lists
    06:20:34 Select End Stud Placement from 2 dropdown
    06:20:47 The -- Interior Stud Framing -- Menu lists
    06:20:49 Select Interior Stud Material from 2 dropdown
    06:20:50 The -- Interior Stud Framing -- Menu lists
    06:20:52 Select Interior Stud Spacing from 2 dropdown
    06:20:54 The -- Interior Stud Framing -- Menu lists
    06:20:55 Select Interior Top Plate from 2 dropdown
    06:20:57 The -- Interior Stud Framing -- Menu lists
    06:20:58 Select Interior Very Top Plate from 2 dropdown
    06:21:00 The -- Interior Stud Framing -- Menu lists
    06:21:01 Select Interior Bottom Plate from 2 dropdown
    06:21:03 The -- Interior Stud Framing -- Menu lists
    06:21:05 Select Interior Very Bottom Plate from 2 dropdown
    06:21:17 The -- Roof Framing -- Menu lists
    06:21:19 Select Default Material from 2 dropdown
    06:21:20 The -- Roof Framing -- Menu lists
    06:21:22 Select Roof Framing Style from 2 dropdown
    06:21:24 The -- Roof Framing -- Menu lists
    06:21:25 Select Truss Special from 2 dropdown
    06:21:27 The -- Roof Framing -- Menu lists
    06:21:28 Select Truss Material from 2 dropdown
    06:21:30 The -- Roof Framing -- Menu lists
    06:21:32 Select Drop Front Gables w/ Flush Purlins from 2 dropdown
    06:21:33 The -- Roof Framing -- Menu lists
    06:21:35 Select Drop Back Gables w/ Flush Purlins from 2 dropdown
    06:21:37 The -- Roof Framing -- Menu lists
    06:21:38 Select Truss Spacing from 2 dropdown
    06:21:40 The -- Roof Framing -- Menu lists
    06:21:41 Select Truss Placement from 2 dropdown
    06:21:43 The -- Roof Framing -- Menu lists
    06:21:44 Select Overhang Style from 2 dropdown
    06:21:46 The -- Roof Framing -- Menu lists
    06:21:48 Select Truss Block Style from 2 dropdown
    06:21:49 The -- Roof Framing -- Menu lists
    06:21:51 Select Truss Block Material from 2 dropdown
    06:21:53 The -- Roof Framing -- Menu lists
    06:21:54 Select Eave Sub Fascia Material from 2 dropdown
    06:21:56 The -- Roof Framing -- Menu lists
    06:21:57 Select Gable Sub Fascia Material from 2 dropdown
    06:21:59 The -- Roof Framing -- Menu lists
    06:22:01 Select Gable Rake Material from 2 dropdown
    06:22:38 The -- Purlin Framing -- Menu lists
    06:22:39 Select Purlin Material from 2 dropdown
    06:22:41 The -- Purlin Framing -- Menu lists
    06:22:42 Select Purlin Type from 2 dropdown
    06:22:44 The -- Purlin Framing -- Menu lists
    06:22:46 Select Purlin Spacing from 2 dropdown
    06:22:47 The -- Purlin Framing -- Menu lists
    06:22:49 Select Purlin Start from 2 dropdown
    06:22:51 The -- Purlin Framing -- Menu lists
    06:22:52 Select Eave Purlin from 2 dropdown
    06:22:54 The -- Purlin Framing -- Menu lists
    06:22:55 Select Flush Purlin Ledger from 2 dropdown
    06:22:57 The -- Purlin Framing -- Menu lists
    06:22:59 Select Purlin Block Material from 2 dropdown
    06:23:00 The -- Purlin Framing -- Menu lists
    06:23:02 Select Outrigger Material from 2 dropdown
    06:23:04 The -- Purlin Framing -- Menu lists
    06:23:05 Select Gable Outrigger Material from 2 dropdown
    06:23:07 The -- Purlin Framing -- Menu lists
    06:23:08 Select Gable Blocking Material from 2 dropdown
    06:23:10 The -- Purlin Framing -- Menu lists
    06:23:12 Select Purlin Block Style from 2 dropdown
    06:23:41 The -- Rafter Framing -- Menu lists
    06:23:43 Select Rafter Material from 2 dropdown
    06:23:45 The -- Rafter Framing -- Menu lists
    06:23:46 Select End Rafter Material from 2 dropdown
    06:23:48 The -- Rafter Framing -- Menu lists
    06:23:49 Select Rafter Spacing from 2 dropdown
    06:23:51 The -- Rafter Framing -- Menu lists
    06:23:53 Select Rafter Placement from 2 dropdown
    06:23:54 The -- Rafter Framing -- Menu lists
    06:23:56 Select Seat Cut Type from 2 dropdown
    06:23:58 The -- Rafter Framing -- Menu lists
    06:23:59 Select Hip Rafter from 2 dropdown
    06:24:01 The -- Rafter Framing -- Menu lists
    06:24:04 Select Hip Rafter Plies from 2 dropdown
    06:24:06 The -- Rafter Framing -- Menu lists
    06:24:07 Select Ridge Board from 2 dropdown
    06:24:09 The -- Rafter Framing -- Menu lists
    06:24:10 Select Ridge Board Plies from 2 dropdown
    06:24:12 The -- Rafter Framing -- Menu lists
    06:24:14 Select Roof Ledger Material from 2 dropdown
    06:24:15 The -- Rafter Framing -- Menu lists
    06:24:17 Select Rafter Bond Plate Material from 2 dropdown
    06:24:46 The -- Ceiling Framing -- Menu lists
    06:24:47 Select Ceiling Joist Material from 2 dropdown
    06:24:49 The -- Ceiling Framing -- Menu lists
    06:24:50 Select Ceiling Joist Spacing from 2 dropdown
    06:24:52 The -- Ceiling Framing -- Menu lists
    06:24:54 Select Ceiling Joist Placement from 2 dropdown
    06:24:55 The -- Ceiling Framing -- Menu lists
    06:24:57 Select Ceiling Ledger Material from 2 dropdown
    06:24:59 The -- Ceiling Framing -- Menu lists
    06:25:00 Select Interior Purlin Material from 2 dropdown
    06:25:02 The -- Ceiling Framing -- Menu lists
    06:25:03 Select Interior Purlin Type from 2 dropdown
    06:25:05 The -- Ceiling Framing -- Menu lists
    06:25:07 Select Interior Purlin Spacing from 2 dropdown
    06:25:08 The -- Ceiling Framing -- Menu lists
    06:25:10 Select Interior Purlin Start from 2 dropdown
    06:25:44 The -- Floor Framing -- Menu lists
    06:25:46 Select Joist Material from 2 dropdown
    06:25:48 The -- Floor Framing -- Menu lists
    06:25:49 Select Joist Spacing from 2 dropdown
    06:25:51 The -- Floor Framing -- Menu lists
    06:25:52 Select Perpendicular Rim Joist Material from 2 dropdown
    06:25:54 The -- Floor Framing -- Menu lists
    06:25:56 Select Parallel Rim Joist Material from 2 dropdown
    06:25:57 The -- Floor Framing -- Menu lists
    06:25:59 Select Skid Material from 2 dropdown
    06:26:01 The -- Floor Framing -- Menu lists
    06:26:04 Select Skid Spacing from 2 dropdown
    06:26:28 The -- Interior Girt Framing -- Menu lists
    06:26:29 Select Interior Girt Style from 2 dropdown
    06:26:31 The -- Interior Girt Framing -- Menu lists
    06:26:32 Select Interior Top Girt Material from 2 dropdown
    06:26:34 The -- Interior Girt Framing -- Menu lists
    06:26:35 Select Interior Girt Material from 2 dropdown
    06:26:37 The -- Interior Girt Framing -- Menu lists
    06:26:39 Select Interior Girt Spacing from 2 dropdown
    06:26:40 The -- Interior Girt Framing -- Menu lists
    06:26:42 Select Interior Wainscot Girt from 2 dropdown
    06:26:44 The -- Interior Girt Framing -- Menu lists
    06:26:45 Select Interior Wainscot Girt Backer from 2 dropdown
    06:26:47 The -- Interior Girt Framing -- Menu lists
    06:26:48 Select Interior Skirt Board Material from 2 dropdown
    06:26:50 The -- Interior Girt Framing -- Menu lists
    06:26:52 Select Interior Skirt Board Alignment from 2 dropdown
    06:26:53 The -- Interior Girt Framing -- Menu lists
    06:26:55 Select Cut Int Skirt Board at Walk Doors from 2 dropdown
    06:27:21 The -- Roof Sheathing -- Menu lists
    06:27:22 Select Roof Material from 2 dropdown
    06:27:24 The -- Roof Sheathing -- Menu lists
    06:27:25 Select Roof Start from 2 dropdown
    06:27:48 The -- Wall Sheathing -- Menu lists
    06:27:49 Select Wall Material from 2 dropdown
    06:27:51 The -- Wall Sheathing -- Menu lists
    06:27:53 Select Wainscot from 2 dropdown
    06:27:54 The -- Wall Sheathing -- Menu lists
    06:27:56 Select Upper Sheathing from 2 dropdown
    06:27:58 The -- Wall Sheathing -- Menu lists
    06:27:59 Select Eave Start from 2 dropdown
    06:28:01 The -- Wall Sheathing -- Menu lists
    06:28:04 Select Gable Start from 2 dropdown
    06:28:54 The -- Wall Liner -- Menu lists
    06:28:56 Select Liner Material from 2 dropdown
    06:28:58 The -- Wall Liner -- Menu lists
    06:28:59 Select Wainscot Liner Material from 2 dropdown
    06:29:01 The -- Wall Liner -- Menu lists
    06:29:02 Select Eave Liner Start from 2 dropdown
    06:29:04 The -- Wall Liner -- Menu lists
    06:29:06 Select Gable Liner Start from 2 dropdown
    06:29:39 The -- Interior Walls -- Menu lists
    06:29:40 Select Sheathing Side A from 2 dropdown
    06:29:42 The -- Interior Walls -- Menu lists
    06:29:43 Select Sheathing Side B from 2 dropdown
    06:29:45 The -- Ceiling Liner -- Menu lists
    06:29:47 Select Ceiling Material from 2 dropdown
    06:29:48 The -- Ceiling Liner -- Menu lists
    06:29:50 Select Ceiling Start from 2 dropdown
    06:30:06 The -- Floor Sheathing -- Menu lists
    06:30:07 Select Floor Sheathing from 2 dropdown
    06:30:09 The -- Floor Sheathing -- Menu lists
    06:30:10 Select Floor Sheathing Start from 2 dropdown
    06:30:23 The -- Roof Trim -- Menu lists
    06:30:24 Select Ridge Cap from 2 dropdown
    06:30:26 The -- Roof Trim -- Menu lists
    06:30:27 Select Ridge Cap Color from 2 dropdown
    06:30:29 The -- Roof Trim -- Menu lists
    06:30:31 Select Hip Ridge Cap from 2 dropdown
    06:30:32 The -- Roof Trim -- Menu lists
    06:30:34 Select Hip Ridge Cap Color from 2 dropdown
    06:30:36 The -- Roof Trim -- Menu lists
    06:30:37 Select Valley Trim from 2 dropdown
    06:30:39 The -- Roof Trim -- Menu lists
    06:30:40 Select Valley Trim Color from 2 dropdown
    06:30:42 The -- Roof Trim -- Menu lists
    06:30:43 Select Gambrel Transition Trim from 2 dropdown
    06:30:45 The -- Roof Trim -- Menu lists
    06:30:47 Select Western Transition Trim from 2 dropdown
    06:30:48 The -- Roof Trim -- Menu lists
    06:30:50 Select Gambrel Transition Trim Color from 2 dropdown
    06:30:52 The -- Roof Trim -- Menu lists
    06:30:53 Select Western Transition Trim Color from 2 dropdown
    06:30:55 The -- Roof Trim -- Menu lists
    06:30:56 Select Eave Edge Trim from 2 dropdown
    06:30:58 The -- Roof Trim -- Menu lists
    06:31:00 Select Eave Edge Trim Color from 2 dropdown
    06:31:01 The -- Roof Trim -- Menu lists
    06:31:03 Select Gable Edge Trim from 2 dropdown
    06:31:05 The -- Roof Trim -- Menu lists
    06:31:06 Select Gable Edge Trim Color from 2 dropdown
    06:31:08 The -- Roof Trim -- Menu lists
    06:31:09 Select Angled Edge Trim from 2 dropdown
    06:31:11 The -- Roof Trim -- Menu lists
    06:31:13 Select Angled Edge Trim Color from 2 dropdown
    06:31:14 The -- Roof Trim -- Menu lists
    06:31:16 Select High Side Trim from 2 dropdown
    06:31:18 The -- Roof Trim -- Menu lists
    06:31:19 Select High Side Trim Color from 2 dropdown
    06:31:21 The -- Roof Trim -- Menu lists
    06:31:22 Select Gable Flashing from 2 dropdown
    06:31:24 The -- Roof Trim -- Menu lists
    06:31:26 Select Gable Flashing Color from 2 dropdown
    06:31:27 The -- Roof Trim -- Menu lists
    06:31:29 Select Shed Flashing from 2 dropdown
    06:31:31 The -- Roof Trim -- Menu lists
    06:31:32 Select Shed Flashing Color from 2 dropdown
    06:32:14 The -- Fascia and Soffit -- Menu lists
    06:32:15 Select Eave Fascia Material from 2 dropdown
    06:32:17 The -- Fascia and Soffit -- Menu lists
    06:32:19 Select Gable Fascia Material from 2 dropdown
    06:32:20 The -- Fascia and Soffit -- Menu lists
    06:32:22 Select Eave Fascia Color from 2 dropdown
    06:32:24 The -- Fascia and Soffit -- Menu lists
    06:32:25 Select Gable Fascia Color from 2 dropdown
    06:32:27 The -- Fascia and Soffit -- Menu lists
    06:32:28 Select Soffit Style from 2 dropdown
    06:32:30 The -- Fascia and Soffit -- Menu lists
    06:32:32 Select Eave Soffit Color from 2 dropdown
    06:32:33 The -- Fascia and Soffit -- Menu lists
    06:32:35 Select Gable Soffit Color from 2 dropdown
    06:32:36 The -- Fascia and Soffit -- Menu lists
    06:32:38 Select Eave Soffit Box from 2 dropdown
    06:32:40 The -- Fascia and Soffit -- Menu lists
    06:32:41 Select Gable Soffit Box from 2 dropdown
    06:32:43 The -- Fascia and Soffit -- Menu lists
    06:32:44 Select Eave Soffit Material from 2 dropdown
    06:32:46 The -- Fascia and Soffit -- Menu lists
    06:32:48 Select Gable Soffit Material from 2 dropdown
    06:33:03 The -- Wall Trim -- Menu lists
    06:33:05 Select Base Trim from 2 dropdown
    06:33:07 The -- Wall Trim -- Menu lists
    06:33:08 Select Base Trim Color from 2 dropdown
    06:33:10 The -- Wall Trim -- Menu lists
    06:33:12 Select Top of Wall Trim from 2 dropdown
    06:33:13 The -- Wall Trim -- Menu lists
    06:33:15 Select Top of Wall Trim Color from 2 dropdown
    06:33:16 The -- Wall Trim -- Menu lists
    06:33:18 Select Wainscot Trim from 2 dropdown
    06:33:20 The -- Wall Trim -- Menu lists
    06:33:21 Select Wainscot Trim Color from 2 dropdown
    06:33:34 The -- Exterior Corner Trim -- Menu lists
    06:33:35 Select Outside Corner from 2 dropdown
    06:33:37 The -- Exterior Corner Trim -- Menu lists
    06:33:39 Select Outside Corner Color from 2 dropdown
    06:33:40 The -- Exterior Corner Trim -- Menu lists
    06:33:42 Select Inside Corner from 2 dropdown
    06:33:44 The -- Exterior Corner Trim -- Menu lists
    06:33:45 Select Inside Corner Color from 2 dropdown
    06:33:47 The -- Exterior Corner Trim -- Menu lists
    06:33:48 Select Wainscot Outside Corner from 2 dropdown
    06:33:50 The -- Exterior Corner Trim -- Menu lists
    06:33:52 Select Wainscot Outside Corner Color from 2 dropdown
    06:33:53 The -- Exterior Corner Trim -- Menu lists
    06:33:55 Select Wainscot Inside Corner from 2 dropdown
    06:33:57 The -- Exterior Corner Trim -- Menu lists
    06:33:58 Select Wainscot Inside Corner Color from 2 dropdown
    06:34:16 The -- Open Wall Trim -- Menu lists
    06:34:18 Select Open Wall Measured From from 2 dropdown
    06:34:20 The -- Open Wall Trim -- Menu lists
    06:34:21 Select Open Wall Base Trim from 2 dropdown
    06:34:23 The -- Open Wall Trim -- Menu lists
    06:34:24 Select Open Wall Base Trim Color from 2 dropdown
    06:34:26 The -- Open Wall Trim -- Menu lists
    06:34:28 Select Open Top of Wall Trim from 2 dropdown
    06:34:29 The -- Open Wall Trim -- Menu lists
    06:34:31 Select Open Top of Wall Trim Color from 2 dropdown
    06:34:33 The -- Open Wall Trim -- Menu lists
    06:34:34 Select Interior Open Wall Base Trim from 2 dropdown
    06:34:36 The -- Open Wall Trim -- Menu lists
    06:34:37 Select Interior Open Base Trim Color from 2 dropdown
    06:34:56 The -- Liner Trim -- Menu lists
    06:34:57 Select Interior Base Trim from 2 dropdown
    06:34:59 The -- Liner Trim -- Menu lists
    06:35:00 Select Interior Base Trim Color from 2 dropdown
    06:35:02 The -- Liner Trim -- Menu lists
    06:35:04 Select Interior Wainscot Trim from 2 dropdown
    06:35:05 The -- Liner Trim -- Menu lists
    06:35:07 Select Interior Wainscot Trim Color from 2 dropdown
    06:35:16 The -- Interior Corner Trim -- Menu lists
    06:35:17 Select Interior Outside Corner from 2 dropdown
    06:35:19 The -- Interior Corner Trim -- Menu lists
    06:35:21 Select Interior Outside Corner Color from 2 dropdown
    06:35:22 The -- Interior Corner Trim -- Menu lists
    06:35:24 Select Interior Inside Corner from 2 dropdown
    06:35:25 The -- Interior Corner Trim -- Menu lists
    06:35:27 Select Interior Inside Corner Color from 2 dropdown
    06:35:29 The -- Interior Corner Trim -- Menu lists
    06:35:30 Select Interior Outside Wainscot Corner from 2 dropdown
    06:35:32 The -- Interior Corner Trim -- Menu lists
    06:35:33 Select Interior Outside Wainscot Corner Color from 2 dropdown
    06:35:35 The -- Interior Corner Trim -- Menu lists
    06:35:37 Select Interior Inside Wainscot Corner from 2 dropdown
    06:35:38 The -- Interior Corner Trim -- Menu lists
    06:35:40 Select Interior Inside Wainscot Corner Color from 2 dropdown
    06:35:58 The -- Ceiling Trim -- Menu lists
    06:36:00 Select Ceiling Pitch Break from 2 dropdown
    06:36:02 The -- Ceiling Trim -- Menu lists
    06:36:05 Select Ceiling Pitch Break Color from 2 dropdown
    06:36:06 The -- Ceiling Trim -- Menu lists
    06:36:08 Select Eave Ceiling/Wall from 2 dropdown
    06:36:10 The -- Ceiling Trim -- Menu lists
    06:36:11 Select Eave Ceiling/Wall Color from 2 dropdown
    06:36:13 The -- Ceiling Trim -- Menu lists
    06:36:14 Select Gable Ceiling/Wall from 2 dropdown
    06:36:16 The -- Ceiling Trim -- Menu lists
    06:36:18 Select Gable Ceiling/Wall Color from 2 dropdown
    06:39:27 Test Pass
  • Door And Window

    0h:11m:14s+475ms

    06:41:19 AM
    Door And Window
    2024-12-20 06:41:19 2024-12-20 06:52:33 0h:11m:14s+475ms
    Status Timestamp Details
    06:41:19 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    06:41:20 Click on th setting button
    06:41:23 Navigate to the framing rules
    06:41:25 Click on the AUTOTEST_PHTEST framing rules edit button
    06:41:32 Click on the Door And Window tab
    06:41:32 The -- Walkdoor Trim -- Menu lists
    06:41:33 Select Header from 2 dropdown
    06:41:35 The -- Walkdoor Trim -- Menu lists
    06:41:37 Select Header Color from 2 dropdown
    06:41:38 The -- Walkdoor Trim -- Menu lists
    06:41:40 Select Trimmer from 2 dropdown
    06:41:42 The -- Walkdoor Trim -- Menu lists
    06:41:43 Select Trimmer Color from 2 dropdown
    06:41:45 The -- Walkdoor Trim -- Menu lists
    06:41:46 Select Top Jamb from 2 dropdown
    06:41:48 The -- Walkdoor Trim -- Menu lists
    06:41:50 Select Top Jamb Color from 2 dropdown
    06:41:51 The -- Walkdoor Trim -- Menu lists
    06:41:53 Select Side Jamb from 2 dropdown
    06:41:55 The -- Walkdoor Trim -- Menu lists
    06:41:56 Select Side Jamb Color from 2 dropdown
    06:41:58 The -- Walkdoor Trim -- Menu lists
    06:41:59 Select Interior Header from 2 dropdown
    06:42:01 The -- Walkdoor Trim -- Menu lists
    06:42:04 Select Interior Header Color from 2 dropdown
    06:42:06 The -- Walkdoor Trim -- Menu lists
    06:42:07 Select Interior Trimmer from 2 dropdown
    06:42:09 The -- Walkdoor Trim -- Menu lists
    06:42:10 Select Interior Trimmer Color from 2 dropdown
    06:42:33 The -- Walkdoor Post Framing -- Menu lists
    06:52:33 Test FailOpenQA.Selenium.WebDriverTimeoutException : Timed out after 300 seconds ----> OpenQA.Selenium.NoSuchElementException : no such element: Unable to locate element: {"method":"xpath","selector":"(//div[text()='-- Walkdoor Post Framing --'])[1]//following::div[text()='Jamb Type'][1]//following::td[@col='1'][1]"} (Session info: chrome=131.0.6778.140); For documentation on this error, please visit: https://www.selenium.dev/documentation/webdriver/troubleshooting/errors#no-such-element-exception
    06:52:33 base64-img
  • Fix issues with hidden materials

    0h:1m:51s+878ms

    06:54:24 AM
    Fix issues with hidden materials
    2024-12-20 06:54:24 2024-12-20 06:56:16 0h:1m:51s+878ms
    Status Timestamp Details
    06:54:24 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    06:54:40 Click on the start from scratch
    06:54:54 Click on the 'job button' tab
    06:54:55 Enter OutputsFile in the job name field
    06:55:28 Click on the save button
    06:55:29 Click on the 'Drawing' tab
    06:55:31 Click on the ''Assembly Drawing ROOF_1''
    06:55:33 Click on the ''Assembly Drawing ROOF_2''
    06:55:36 Click on the ''Assembly Drawing EXT_1''
    06:55:39 Click on the ''Assembly Drawing EXT_2''
    06:55:42 Click on the ''Assembly Drawing EXT_3''
    06:55:45 Click on the ''Assembly Drawing EXT_4''
    06:55:50 Click on the outputs button
    06:55:51 Check the Assembly Drawings checkbox
    06:56:11 Click on the download button
    06:56:16 Test Pass
  • Smoke test on the Main Building Sub-Menu Functionality

    0h:0m:36s+157ms

    06:56:25 AM
    Smoke test on the Main Building Sub-Menu Functionality
    2024-12-20 06:56:25 2024-12-20 06:57:01 0h:0m:36s+157ms
    Status Timestamp Details
    06:56:25 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    06:56:26 Click on th setting button
    06:56:29 Navigate to the framing rules
    06:56:31 Click on the AUTOTEST_PHTEST framing rules edit button
    06:57:01 Click on the start from scratch
  • Smoke test on the Building Size Functionality

    0h:2m:9s+277ms

    06:57:15 AM
    Smoke test on the Building Size Functionality
    2024-12-20 06:57:15 2024-12-20 06:59:25 0h:2m:9s+277ms
    Status Timestamp Details
    06:57:17 Click on the 'Building Size' tab
    06:57:23 Set 20' x 20' to the 'Building Size' dropdown
    06:57:39 After selecting 20' x 20', the length and width fields are disabled
    06:57:45 Set 30' x 60' to the 'Building Size' dropdown
    06:58:03 After selecting 30' x 60', the length and width fields are disabled
    06:58:09 Set 40' x 40' to the 'Building Size' dropdown
    06:58:26 After selecting 40' x 40', the length and width fields are disabled
    06:58:32 Set 50' x 100' to the 'Building Size' dropdown
    06:58:49 After selecting 50' x 100', the length and width fields are disabled
    06:58:55 Set Custom Size to the 'Building Size' dropdown
    06:59:15 After selecting Custom Size, the length and width fields are enabled
    06:59:15 Enter 40 in the length field
    06:59:16 Enter 30 in the width field
    06:59:25 After selecting Custom Size, the length and width fields are editable.
  • Measure From

    0h:2m:2s+587ms

    06:59:25 AM
    Measure From
    2024-12-20 06:59:25 2024-12-20 07:01:28 0h:2m:2s+587ms
    Status Timestamp Details
    06:59:29 Set Outside Of Girt to the 'Measure From' dropdown
    06:59:31 Click on the 'job button' tab
    06:59:32 Enter CheckMeasureFrom in the job name field
    07:00:01 Click on the save button
    07:00:04 Click on the outputs button
    07:00:05 Check the Post Layout Overall & Diag OoF checkbox
    07:00:22 Click on the download button
    07:00:22 Verify PDF File is downloaded for CheckMeasureFrom
    07:00:25 Outside Of Girt material 50' length is shown in the PDF file
    07:00:25 Outside Of Girt material 40' length is shown in the PDF file
    07:00:25 Outside Of Girt material 30' length is shown in the PDF file
    07:00:27 Click on the 'Main Building Tab'
    07:00:31 Set Outside of Post to the 'Measure From' dropdown
    07:01:04 Click on the save button
    07:01:07 Click on the outputs button
    07:01:08 Check the Post Layout Overall & Diag OoF checkbox
    07:01:25 Click on the download button
    07:01:25 Verify PDF File is downloaded for CheckMeasureFrom
    07:01:28 Outside of Post material 50' 4 3/16" length is shown in the PDF file
    07:01:28 Outside of Post material 40' 3" length is shown in the PDF file
    07:01:28 Outside of Post material 30' 3" length is shown in the PDF file
  • Roof Height Style

    0h:1m:39s+324ms

    07:01:28 AM
    Roof Height Style
    2024-12-20 07:01:28 2024-12-20 07:03:07 0h:1m:39s+324ms
    Status Timestamp Details
    07:01:30 Set Top Of Wall Material to the 'Roof Height Style' dropdown
    07:01:39 If the user sets 'Top Of Wall Material' to 'Roof Height Style' dropdown, the ceiling height field is disabled
    07:01:41 Click on the ''Wainscot' tab'
    07:01:41 Uncheck the 'Has Wainscot' checkbox
    07:01:42 Click on the 'Building Size' tab
    07:01:43 Enter 12' in the exterior metal height field
    07:01:54 Click on the 'Drawing' tab
    07:01:55 Click on the 'Sheathing Drawing EXT_1' tab'
    07:01:57 Exterior Wall Length is update after changing the exterior metal height
    07:01:58 Click on the ''Canvas 3D View'' tab
    07:02:01 Set Ceiling Height to the 'Roof Height Style' dropdown
    07:02:10 If the user sets 'Ceiling Height' to 'Roof Height Style' dropdown, the Exterior Metal Height field is disabled
    07:02:10 Enter 17' in the ceiling height field
    07:02:11 Enter 3 in the roof pitch field
    07:02:41 Click on the save button
    07:02:44 Click on the outputs button
    07:02:45 Check the Cross Sections checkbox
    07:03:03 Click on the download button
    07:03:03 Verify PDF File is downloaded for CheckMeasureFrom
    07:03:05 Ceiling height is shown in the cross section pdf file
    07:03:05 Roof pitch is shown in the cross section pdf file
    07:03:06 Enter 16' in the ceiling height field
    07:03:07 Enter 4 in the roof pitch field
  • Roof Style

    0h:5m:20s+248ms

    07:03:07 AM
    Roof Style
    2024-12-20 07:03:07 2024-12-20 07:08:27 0h:5m:20s+248ms
    Status Timestamp Details
    07:03:10 Set Shed to the 'Roof Style' dropdown
    07:03:11 Click on the change view button
    07:03:12 Click on the Front Right
    07:03:23 Set Gable to the 'Roof Style' dropdown
    07:03:25 Click on the change view button
    07:03:25 Click on the Back Right
    07:03:36 Set Gambrel to the 'Roof Style' dropdown
    07:03:38 Click on the change view button
    07:03:38 Click on the Front Elevation
    07:03:50 Set Advanced... to the 'Roof Style' dropdown
    07:03:51 Enter Offset Gable in the roof style field
    07:03:53 Enter 5 in the slope field
    07:03:54 Enter 20 in the Offset To Peak field
    07:03:55 Enter 7 in the slope field
    07:03:55 Enter 15 in the Offset To Peak field
    07:03:56 Enter 9 in the slope field
    07:03:57 Enter 10 in the Offset To Peak field
    07:03:58 Click on the 'apply button'
    07:04:11 Roof pitch value updated after changing the slope value of Offset Gable.
    07:04:20 Set Advanced... to the 'Roof Style' dropdown
    07:04:21 Enter Asymetric Gable in the roof style field
    07:04:23 Enter 5 in the right slope field
    07:04:24 Enter 20 in the left slope field
    07:04:25 Enter 7 in the right slope field
    07:04:25 Enter 15 in the left slope field
    07:04:26 Enter 9 in the right slope field
    07:04:27 Enter 10 in the left slope field
    07:04:29 Click on the 'apply button'
    07:04:34 Roof pitch value updated after changing the left slope value of Asymetric Gable.
    07:04:44 Set Advanced... to the 'Roof Style' dropdown
    07:04:46 Enter Western in the roof style field
    07:04:48 Enter 6 in the upper slope field
    07:04:48 Enter 4 in the lower slope field
    07:04:49 Enter 8 in the Offset To Curb field
    07:04:50 Enter 8 in the upper slope field
    07:04:51 Enter 5 in the lower slope field
    07:04:52 Enter 9 in the Offset To Curb field
    07:04:53 Enter 9 in the upper slope field
    07:04:53 Enter 6 in the lower slope field
    07:04:54 Enter 10 in the Offset To Curb field
    07:04:56 Click on the 'apply button'
    07:05:02 Roof pitch value updated after changing the upper slope value of Western.
    07:05:08 Set Advanced... to the 'Roof Style' dropdown
    07:05:10 Set Advanced... to the 'Roof Style' dropdown
    07:05:12 Enter Gambrel in the roof style field
    07:05:14 Enter 6 in the upper slope field
    07:05:15 Enter 4 in the lower slope field
    07:05:15 Enter 8 in the Offset To Curb field
    07:05:16 Enter 8 in the upper slope field
    07:05:17 Enter 5 in the lower slope field
    07:05:18 Enter 9 in the Offset To Curb field
    07:05:19 Enter 9 in the upper slope field
    07:05:20 Enter 6 in the lower slope field
    07:05:20 Enter 10 in the Offset To Curb field
    07:05:22 Click on the 'apply button'
    07:05:28 Roof pitch value updated after changing the upper slope value of Gambrel.
    07:05:36 Set Gable to the 'Roof Style' dropdown
    07:05:37 Enter 18 in the length field
    07:05:38 Enter 18 in the width field
    07:05:38 Enter 4 in the roof pitch field
    07:05:46 Set 0' 6" to the 'overhang' dropdown
    07:05:57 Click on the 'job review button' tab
    07:05:58 Click on the 'trusses tab'
    07:05:58 Verify that the Overhang is apply on the canvas building 0' 6"
    07:06:00 Click on the ''Canvas 3D View'' tab
    07:06:08 Set 1' to the 'overhang' dropdown
    07:06:18 Click on the 'job review button' tab
    07:06:20 Click on the 'trusses tab'
    07:06:20 Verify that the Overhang is apply on the canvas building 1'
    07:06:21 Click on the ''Canvas 3D View'' tab
    07:06:29 Set 1' 4" to the 'overhang' dropdown
    07:06:40 Click on the 'job review button' tab
    07:06:41 Click on the 'trusses tab'
    07:06:41 Verify that the Overhang is apply on the canvas building 1' 4"
    07:06:43 Click on the ''Canvas 3D View'' tab
    07:06:51 Set 1' 6" to the 'overhang' dropdown
    07:07:02 Click on the 'job review button' tab
    07:07:03 Click on the 'trusses tab'
    07:07:03 Verify that the Overhang is apply on the canvas building 1' 6"
    07:07:04 Click on the ''Canvas 3D View'' tab
    07:07:12 Set 2' to the 'overhang' dropdown
    07:07:21 Click on the 'job review button' tab
    07:07:23 Click on the 'trusses tab'
    07:07:23 Verify that the Overhang is apply on the canvas building 2'
    07:07:24 Click on the ''Canvas 3D View'' tab
    07:07:32 Set 2' 6" to the 'overhang' dropdown
    07:07:41 Click on the 'job review button' tab
    07:07:42 Click on the 'trusses tab'
    07:07:43 Verify that the Overhang is apply on the canvas building 2' 6"
    07:07:44 Click on the ''Canvas 3D View'' tab
    07:07:52 Set 3' to the 'overhang' dropdown
    07:08:02 Click on the 'job review button' tab
    07:08:03 Click on the 'trusses tab'
    07:08:03 Verify that the Overhang is apply on the canvas building 3'
    07:08:05 Click on the ''Canvas 3D View'' tab
    07:08:27 Click on the save button
    07:08:27 Test Pass
  • Smoke test on the Wainscot Functionality

    0h:0m:55s+142ms

    07:08:38 AM
    Smoke test on the Wainscot Functionality
    2024-12-20 07:08:38 2024-12-20 07:09:33 0h:0m:55s+142ms
    Status Timestamp Details
    07:08:38 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    07:08:42 Click on the job tab
    07:08:53 open CheckMeasureFrom job
    07:09:10 Click on the ''Wainscot' tab'
    07:09:10 Uncheck the 'Has Wainscot' checkbox
    07:09:10 Verify that if the 'Has Wainscot' checkbox is unchecked, the Wainscot Height is disabled
    07:09:10 Check the 'Has Wainscot' checkbox
    07:09:10 Verify that if the 'Has Wainscot' checkbox is checked, the Wainscot Height input field is enabled
    07:09:11 Enter 5 in the wainscot height field
    07:09:15 Set BRIGHT RED to the 'Wainscot Color' dropdown
    07:09:26 Click on the 'Drawing' tab
    07:09:27 Click on the 'Sheathing Drawing EXT_1' tab'
    07:09:28 Wainscot Length is update after changing the wainscot height field
    07:09:30 Click on the 'job review button' tab
    07:09:31 Click on the 'sheathing tab'
    07:09:32 Verify that the wainscot color is apply on the canvas
    07:09:33 Click on the ''Canvas 3D View'' tab
  • Smoke test on the Colors Functionality

    0h:0m:29s+483ms

    07:09:33 AM
    Smoke test on the Colors Functionality
    2024-12-20 07:09:33 2024-12-20 07:10:03 0h:0m:29s+483ms
    Status Timestamp Details
    07:09:35 Click on the 'Colors' tab
    07:09:36 Click on the 'roof color dropdown'
    07:09:38 Set BRIGHT RED on the roof color dropdown
    07:09:40 Click on the 'wall color dropdown'
    07:09:43 Set ROYAL BLUE on the wall color dropdown
    07:09:53 Click on the 'job review button' tab
    07:09:55 Click on the 'sheathing tab'
    07:09:55 Verify that the roof color is apply on the canvas
    07:09:56 Verify that the wall color is apply on the canvas
    07:09:58 Click on the ''details' tab'
    07:10:00 Click on the 'wall trim tab'
    07:10:01 Click on the 'Base Trim Colors Dropdown'
    07:10:02 Test FailOpenQA.Selenium.StaleElementReferenceException : stale element reference: stale element not found in the current frame (Session info: chrome=131.0.6778.140); For documentation on this error, please visit: https://www.selenium.dev/documentation/webdriver/troubleshooting/errors#stale-element-reference-exception
    07:10:03 base64-img
  • Delete Jobs

    0h:0m:32s+516ms

    07:10:13 AM
    Delete Jobs
    2024-12-20 07:10:13 2024-12-20 07:10:45 0h:0m:32s+516ms
    Status Timestamp Details
    07:10:13 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    07:10:14 Click on th setting button
    07:10:17 Navigate to the framing rules
    07:10:19 Click on the AUTOTEST_PHTEST framing rules edit button
    07:10:30 Click on the job tab
    07:10:35 open CheckMeasureFrom job
    07:10:37 Click on the Delete button
    07:10:38 Click on the yes button
    07:10:40 Confirm Deletion
    07:10:45 Test Pass
  • Smoke test on the Main Building Sub-Menu Functionality

    0h:4m:44s+222ms

    07:12:35 AM
    Smoke test on the Main Building Sub-Menu Functionality
    2024-12-20 07:12:35 2024-12-20 07:17:19 0h:4m:44s+222ms
    Status Timestamp Details
    07:12:35 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    07:12:51 Click on the start from scratch
    07:13:05 Click on the ''details' tab'
    07:13:06 Click on the 'wall framing tab'
    07:13:10 Select Stud Frame element from the wall framing dropdown
    07:13:12 Click on the 'exterior stud framing tab'
    07:13:22 Click on the 'job review button' tab
    07:13:23 Click on the 'Framing tab'
    07:13:24 Verify that the stud frame is applied on the canvas building and shown in the framing table's job review.
    07:13:26 Click on the 'Drawing' tab
    07:13:27 Click on the ''Assembly Drawing EXT_1''
    07:13:28 Click on the ''Assembly Drawing EXT_2''
    07:13:30 Click on the ''Assembly Drawing EXT_3''
    07:13:31 Click on the ''Assembly Drawing EXT_4''
    07:13:31 Verify that the stud frame is applied on the canvas building and shown in the exterior wall of sheathing drawing
    07:13:33 Click on the 'wall framing tab'
    07:13:36 Select Post Frame element from the wall framing dropdown
    07:13:43 Click on the ''Assembly Drawing EXT_1''
    07:13:44 Click on the ''Assembly Drawing EXT_2''
    07:13:46 Click on the ''Assembly Drawing EXT_3''
    07:13:47 Click on the ''Assembly Drawing EXT_4''
    07:13:47 Verify that the post frame is applied on the canvas building and shown in the exterior wall of sheathing drawing
    07:13:48 Click on the 'job review button' tab
    07:13:49 Verify that the post frame is applied on the canvas building and shown in the framing table's job review.
    07:13:51 Click on the '2D View' tab
    07:13:52 Click on the 'Interior Wall'
    07:13:53 Click on the 'Add Room' tab
    07:13:54 Enter 30 in the length field
    07:13:55 Enter 40 in the width field
    07:13:59 Click on the Return button
    07:14:01 Click on the yes button
    07:14:19 Click on the 'Drawing' tab
    07:14:20 Click on the ''Assembly Drawing INT_1''
    07:14:20 Verify that the interior wall is attached to the canvas building and the interior wall material as shown in the drawing.
    07:14:21 Click on the 'advanced edit tab'
    07:14:23 Click on the 'INT_1 tab'
    07:14:26 Click on the ''details' tab'
    07:14:28 Click on the 'wall framing tab'
    07:14:31 Select Post Frame element from the interior wall framing dropdown
    07:14:41 Click on the 'Drawing' tab
    07:14:43 Click on the ''Assembly Drawing INT_1''
    07:14:43 Verify that the post is attached to the interior wall of the building after updating the interior wall framing from stud to a post frame in the advanced edit.
    07:14:44 Click on the '2D View' tab
    07:14:46 Click on the 'Interior Wall'
    07:14:48 Click on the INT-1
    07:14:48 Verify that the The wall framing material is not updated After interior wall framing material is change in the advanced edit
    07:14:54 Click on the Return button
    07:14:57 Click on the ''details' tab'
    07:14:58 Click on the 'wall framing tab'
    07:15:03 Select None element from the post material dropdown
    07:15:13 Click on the 'job review button' tab
    07:15:15 Click on the 'Framing tab'
    07:15:15 Verify that the post materials are not shown in the job review of framing table if user select none from post frame
    07:15:16 Click on the 'Drawing' tab
    07:15:18 Click on the ''Assembly Drawing EXT_1''
    07:15:19 Click on the ''Assembly Drawing EXT_2''
    07:15:21 Click on the ''Assembly Drawing EXT_3''
    07:15:22 Click on the ''Assembly Drawing EXT_4''
    07:15:26 Select 5Ply2x8 element from the post material dropdown
    07:15:29 Select 2x4RL element from the post material dropdown
    07:15:36 Click on the ''Assembly Drawing EXT_1''
    07:15:37 Click on the ''Assembly Drawing EXT_2''
    07:15:39 Click on the ''Assembly Drawing EXT_3''
    07:15:40 Click on the ''Assembly Drawing EXT_4''
    07:15:41 Click on the 'job review button' tab
    07:15:42 Verify that the post frame is updated in the job review after changing the post material in the wall framing.
    07:15:44 Click on the 'Drawing' tab
    07:15:47 Select 4x6 Treated Post element from the gable post material dropdown
    07:15:55 Click on the ''Assembly Drawing EXT_2''
    07:15:56 Click on the ''Assembly Drawing EXT_4''
    07:15:57 Verify that the gable post material are updated for the gable wall and shown in the in the drawing table
    07:15:58 Click on the 'job review button' tab
    07:15:59 Verify that the gable post material are updated for the gable wall and shown in the in the job review table
    07:16:00 Click on the ''Canvas 3D View'' tab
    07:16:02 Click on the change view button
    07:16:03 Click on the Front Left
    07:16:06 Click on the ''Open Wall' tab'
    07:16:20 Select 4Ply2x8 element from the open wall post material dropdown
    07:16:31 Click on the 'Drawing' tab
    07:16:33 Click on the ''Assembly Drawing EXT_1''
    07:16:33 Verify that the stud frame is applied on the canvas building and shown in the exterior wall of sheathing drawing
    07:16:34 Click on the ''Canvas 3D View'' tab
    07:16:35 Click on the change view button
    07:16:35 Click on the Front Left
    07:16:39 Click on the ''Open Wall' tab'
    07:16:51 Click on the change view button
    07:16:52 Click on the Front Right
    07:17:02 Uncheck the 'Keep open wall gable posts' checkbox
    07:17:12 Click on the 'Drawing' tab
    07:17:13 Click on the ''Assembly Drawing EXT_2''
    07:17:13 Verify that if the 'Keep Open Wall Gable Posts' checkbox is not checked, the post is not shown in the open gable wall
    07:17:13 Check the 'Keep open wall gable posts' checkbox
    07:17:19 Verify that if the 'Keep Open Wall Gable Posts' checkbox is checked, the post is shown in the open gable wall
    07:17:19 Test Pass
  • If users create blank output categories

    0h:1m:4s+055ms

    07:19:11 AM
    If users create blank output categories
    2024-12-20 07:19:11 2024-12-20 07:20:15 0h:1m:4s+055ms
    Status Timestamp Details
    07:19:11 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    07:19:12 Click on th setting button
    07:19:14 Navigate to the Output Categories page
    07:19:18 Click on the 'save' button
    07:19:19 Click on th setting button
    07:19:21 Navigate to the Output Categories page
    07:19:22 Click on the 'Add' button
    07:19:23 Enter in the last row of output categories table field
    07:19:23 Click on the 'save' button
    07:19:23 Verified that an alert message is shown to the user if any output category name is empty.
    07:19:24 Enter TestOutputCategories in the last row of output categories table field
    07:19:27 Click on the 'save' button
    07:19:43 Click on the start from scratch
    07:19:56 Click on the 'job review button' tab
    07:19:56 Verify that the newly create Output category is shown in the Job Review tab.
    07:19:57 Click on the 'home button'
    07:20:02 Click on the 'No button'
    07:20:03 Click on th setting button
    07:20:05 Navigate to the Output Categories page
    07:20:07 Click on the TestOutputCategories
    07:20:09 Click on the Delete Button
    07:20:11 Click on the 'save' button
    07:20:13 Click on th setting button
    07:20:15 Navigate to the Output Categories page
    07:20:15 Test Pass
  • Disconnect Can Customize permission from EModeler

    0h:0m:50s+562ms

    07:22:05 AM
    Disconnect Can Customize permission from EModeler
    2024-12-20 07:22:05 2024-12-20 07:22:55 0h:0m:50s+562ms
    Status Timestamp Details
    07:22:05 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    07:22:06 Click on th setting button
    07:22:08 Navigate to the distributor page
    07:22:16 Uncheck the Can Customize checkbox
    07:22:16 Uncheck the Using RTO National checkbox
    07:22:21 Click on the save button
    07:22:28 Click on th setting button
    07:22:28 Verify that the Customize disappears from the Settings dropdown list.
    07:22:31 Click on EModeler tab'
    07:22:52 If the Can Customize checkbox is unchecked, Verify that the EModeler job opens successfully.
    07:22:55 Test Pass
  • Changes the distributor checkbox

    0h:0m:15s+837ms

    07:23:05 AM
    Changes the distributor checkbox
    2024-12-20 07:23:05 2024-12-20 07:23:20 0h:0m:15s+837ms
    Status Timestamp Details
    07:23:05 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    07:23:06 Click on th setting button
    07:23:08 Navigate to the distributor page
    07:23:16 Check the Can Customize checkbox
    07:23:20 Click on the save button
    07:23:20 Test Pass
  • HOT PATCH: Custom openings show NaN if the Opening location is switched

    0h:6m:0s+369ms

    07:25:11 AM
    HOT PATCH: Custom openings show NaN if the Opening location is switched
    2024-12-20 07:25:11 2024-12-20 07:31:11 0h:6m:0s+369ms
    Status Timestamp Details
    07:25:11 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    07:25:26 Click on the start from scratch
    07:25:46 Click on the opening
    07:25:47 Click on the overhead door
    07:25:48 Click on the custom style
    07:25:50 Click on the change view button
    07:25:50 Click on the Front Left
    07:26:07 Click on the change view button
    07:26:07 Click on the Front Left
    07:31:11 Test FailOpenQA.Selenium.WebDriverTimeoutException : Timed out after 300 seconds ----> OpenQA.Selenium.NoSuchElementException : no such element: Unable to locate element: {"method":"xpath","selector":"//div[@id='w2ui-popup']//label[text()='Location']//following::input[@name='LocationSel']"} (Session info: chrome=131.0.6778.140); For documentation on this error, please visit: https://www.selenium.dev/documentation/webdriver/troubleshooting/errors#no-such-element-exception
    07:31:11 base64-img
  • HOT PATCH - Output Categories double up doors when moved

    0h:4m:39s+446ms

    07:33:02 AM
    HOT PATCH - Output Categories double up doors when moved
    2024-12-20 07:33:02 2024-12-20 07:37:41 0h:4m:39s+446ms
    Status Timestamp Details
    07:33:02 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    07:33:03 Click on th setting button
    07:33:05 Navigate to the Output Categories page
    07:33:07 Click on the 'Add' button
    07:33:08 Enter TestWalkDoor in the last row of output categories table field
    07:33:10 Click on the 'Add' button
    07:33:10 Enter TestOverhead in the last row of output categories table field
    07:33:12 Click on the 'Add' button
    07:33:13 Enter TestSlider in the last row of output categories table field
    07:33:14 Click on the 'Add' button
    07:33:15 Enter TestWindow in the last row of output categories table field
    07:33:17 Click on the Doors & Windows
    07:33:20 Click on the DWWalkDoor
    07:33:21 Click on the move button
    07:33:22 Click on the TestWalkDoor
    07:33:25 Click on the DWOverhead
    07:33:26 Click on the move button
    07:33:27 Click on the TestOverhead
    07:33:30 Click on the DWSlider
    07:33:31 Click on the move button
    07:33:32 Click on the TestSlider
    07:33:35 Click on the DWWindow
    07:33:36 Click on the move button
    07:33:37 Click on the TestWindow
    07:33:40 Click on the TestWalkDoor
    07:33:42 Click on the DWWalkDoor
    07:33:45 Click on the TestOverhead
    07:33:47 Click on the DWOverhead
    07:33:49 Click on the TestSlider
    07:33:52 Click on the DWSlider
    07:33:54 Click on the TestWindow
    07:33:56 Click on the DWWindow
    07:33:56 Verify that DWWalkDoor, DWOverhead, DWSlider and DWWindow successfully moves to the TestWalkDoor, TestOverhead, TestSlider and TestWindow of the Usage table.
    07:33:59 Click on the 'save' button
    07:34:26 Click on the start from scratch
    07:34:36 Click on the opening
    07:34:37 Click on the walkdoor
    07:34:40 Click on the Solid
    07:34:42 Click on the 3x7 LIS Solid Steel Door
    07:34:46 Click on the opening
    07:34:47 Click on the overhead door
    07:34:49 Click on the Raised Panel
    07:34:51 Click on the 10x10 OHD-no windows
    07:35:04 Click on the change view button
    07:35:04 Click on the Back Right
    07:35:05 Click on the opening
    07:35:06 Click on the Slider
    07:35:12 Click on the opening
    07:35:13 Click on the windows
    07:35:15 Click on the Slider
    07:35:17 Click on the 30x30 Slider
    07:35:31 Click on the 'job review button' tab
    07:35:31 Verify that the TestWalkDoor, TestOverhead, TestSlider and TestWindow are shown in the newly created TestWindow of the Job Review
    07:35:32 Click on the 'test walkDoor button'
    07:35:34 Click on the 'test overhead button'
    07:35:36 Click on the 'test slider button'
    07:35:39 Click on the 'test window button'
    07:35:41 Click on the ''Canvas 3D View'' tab
    07:35:43 Click on the 'job button' tab
    07:35:44 Enter OutputCategoriesTestJob in the job name field
    07:36:12 Click on the save button
    07:36:15 Click on the outputs button
    07:36:16 Check the Job Data PDF checkbox
    07:36:35 Click on the download button
    07:36:35 Verify PDF File is downloaded
    07:37:41 Verify that TestWalkDoor element shown in the pdf file
    07:37:41 Verify that Walk Door 3x7 LIS Solid Steel element shown in the pdf file
    07:37:41 Verify that TestOverhead element shown in the pdf file
    07:37:41 Verify that Overhead 10x10 OHD-no element shown in the pdf file
    07:37:41 Verify that TestSlider element shown in the pdf file
    07:37:41 Verify that Slider 10x10 Slider element shown in the pdf file
    07:37:41 Verify that TestWindow element shown in the pdf file
    07:37:41 Verify that Window 30x30 Slider element shown in the pdf file
    07:37:41 Test Pass
  • Delete data

    0h:1m:24s+945ms

    07:37:51 AM
    Delete data
    2024-12-20 07:37:51 2024-12-20 07:39:16 0h:1m:24s+945ms
    Status Timestamp Details
    07:37:51 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    07:37:52 Click on th setting button
    07:37:54 Navigate to the Output Categories page
    07:37:56 Click on the TestWalkDoor
    07:37:59 Click on the DWWalkDoor
    07:38:00 Click on the move button
    07:38:01 Click on the Doors & Windows
    07:38:04 Click on the TestOverhead
    07:38:06 Click on the DWOverhead
    07:38:07 Click on the move button
    07:38:09 Click on the Doors & Windows
    07:38:11 Click on the TestSlider
    07:38:13 Click on the DWSlider
    07:38:15 Click on the move button
    07:38:16 Click on the Doors & Windows
    07:38:19 Click on the TestWindow
    07:38:21 Click on the DWWindow
    07:38:22 Click on the move button
    07:38:24 Click on the Doors & Windows
    07:38:26 Click on the Doors & Windows
    07:38:28 Click on the DWWalkDoor
    07:38:31 Click on the DWOverhead
    07:38:33 Click on the DWOverhead
    07:38:35 Click on the DWSlider
    07:38:38 Click on the DWWindow
    07:38:40 Click on the TestWalkDoor
    07:38:42 Click on the Delete Button
    07:38:44 Click on the TestOverhead
    07:38:45 Click on the Delete Button
    07:38:48 Click on the TestSlider
    07:38:49 Click on the Delete Button
    07:38:52 Click on the TestWindow
    07:38:53 Click on the Delete Button
    07:38:56 Click on the 'save' button
    07:39:00 Click on the job tab
    07:39:05 open OutputCategoriesTestJob job
    07:39:07 Click on the Delete button
    07:39:08 Click on the yes button
    07:39:11 Confirm Deletion
    07:39:16 Test Pass
  • Header Issue snapping to main post

    0h:2m:45s+381ms

    07:41:06 AM
    Header Issue snapping to main post
    2024-12-20 07:41:06 2024-12-20 07:43:51 0h:2m:45s+381ms
    Status Timestamp Details
    07:41:06 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    07:41:07 Click on th setting button
    07:41:32 Navigate to the setup wizard
    07:41:33 Click on the 'WalkDoors' tab
    07:41:36 Click on the download button and download excel file
    07:41:37 Verify the 3378DimIssue material width value 3.3229166666666665 is correctly shown in the XLSX file Setup Wizard.
    07:41:39 Click on th setting button
    07:42:04 Navigate to the Doors And Windows page
    07:42:10 Open the 3378DimIssue element from the door and window table
    07:42:10 Verify that the newly create walkdoor Width value match with the DoorWindow(Edit) of width field.
    07:42:12 Click on the add back to list button
    07:42:17 Download the excel file
    07:42:19 Click on the upload button
    07:42:22 Upload file and click on the upload button
    07:42:27 Click on the add back to list button
    07:43:09 Click on the opening
    07:43:10 Click on the walkdoor
    07:43:12 Click on the Panel
    07:43:14 Click on the 3378DimIssue
    07:43:28 Click on the 'door and window tab'
    07:43:30 Click on the 'Non-Structural Walkdoor Post Framing Tab'
    07:43:33 Select Post and Jamb from the jamb type dropdown
    07:43:37 Select Next Column from the header boundaries dropdown
    07:43:48 Click on the 'Drawing' tab
    07:43:49 Click on the ''Assembly Drawing EXT_1''
    07:43:49 Verify that the Next column is applied to the canvas building.
    07:43:51 Test Pass
  • HOT PATCH - Job Bid is missing Doors/Windows

    0h:4m:17s+380ms

    07:45:42 AM
    HOT PATCH - Job Bid is missing Doors/Windows
    2024-12-20 07:45:42 2024-12-20 07:49:59 0h:4m:17s+380ms
    Status Timestamp Details
    07:45:42 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    07:45:43 Click on th setting button
    07:45:45 Navigate to the materials page
    07:45:53 Click on the Job Bid element and click on the edit button
    07:45:53 Check the 'Door And Window' checkbox
    07:45:55 Click on the 'Save' button
    07:45:56 Click on the 'Main Save' button
    07:46:15 Click on the start from scratch
    07:46:27 Click on the opening
    07:46:28 Click on the walkdoor
    07:46:31 Click on the Solid
    07:46:33 Click on the 3x7 LIS Solid Steel Door
    07:46:46 Click on the opening
    07:46:47 Click on the walkdoor
    07:46:49 Click on the Solid
    07:46:51 Click on the 3x7 LIS Solid Steel Door
    07:46:52 Click on the Add ons
    07:46:52 Click on the plus(+) icon of default job
    07:46:54 Click on the #8 x 1 1/4 Flathead Phillips
    07:46:56 Click on the plus(+) icon of default job
    07:46:58 Click on the plus(+) icon of default job
    07:47:01 Click on the 12 X 3 WOOD SCREW FLAT PHILLIPS
    07:47:03 Click on the plus(+) icon of default job
    07:47:05 Click on the plus(+) icon of default job
    07:47:08 Click on the 12-24 X 2 MACHINE SCREW FLAT
    07:47:10 Click on the plus(+) icon of default job
    07:47:26 Click on the 'job button' tab
    07:47:27 Enter Job Bid Missing in the job name field
    07:48:09 Click on the save button
    07:48:12 Click on the outputs button
    07:48:13 Check the Job Bid checkbox
    07:48:30 Click on the download button
    07:49:36 Verify that Doors & Windows element shown in the pdf file
    07:49:36 Verify that 3x7 LIS Solid Steel Door element shown in the pdf file
    07:49:36 Verify that 3x7 LIS Solid Steel Door element shown in the pdf file
    07:49:36 Verify that #8 x 1 1/4 Flathead Phillips element shown in the pdf file
    07:49:36 Verify that 12 X 3 WOOD SCREW FLAT PHILLIPS element shown in the pdf file
    07:49:36 Verify that 12-24 X 2 MACHINE SCREW FLAT element shown in the pdf file
    07:49:40 Click on the 'home button'
    07:49:44 Click on the job tab
    07:49:49 open Job Bid Missing job
    07:49:50 Click on the Delete button
    07:49:52 Click on the yes button
    07:49:54 Confirm Deletion
    07:49:59 Test Pass
  • Min and Max settings for Trim(Post Frame)

    0h:6m:37s+290ms

    07:51:49 AM
    Min and Max settings for Trim(Post Frame)
    2024-12-20 07:51:49 2024-12-20 07:58:27 0h:6m:37s+290ms
    Status Timestamp Details
    07:51:49 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    07:51:51 Click on th setting button
    07:52:15 Navigate to the setup wizard
    07:52:16 Click on the 'Trim' tab
    07:52:27 Click on the add button
    07:52:29 Enter Test Trim 1 in the sku input field
    07:52:30 Enter Test Trim 1 in the description input field
    07:52:30 Enter 1 in the width input field
    07:52:31 Enter 0.25 in the width input field
    07:52:32 Enter 36 in the maximum length input field
    07:52:33 Enter 36 in the maximum length input field
    07:52:35 Select All element from usage table
    07:52:37 Select All element from usage table
    07:52:39 Click on the 'Part Length' button
    07:52:39 Click on the save button
    07:52:40 Click on the add button
    07:52:42 Enter Min and Max Trim in the sku input field
    07:52:42 Enter Min and Max Trim in the description input field
    07:52:43 Enter 1 in the width input field
    07:52:43 Enter 0.25 in the width input field
    07:52:45 Enter 24 in the maximum length input field
    07:52:46 Enter 36 in the maximum length input field
    07:52:48 Select All element from usage table
    07:52:50 Select All element from usage table
    07:52:52 Enter the cost in the pricings table
    07:52:56 Enter the price in the pricings table
    07:53:02 Enter value in the Part Length
    07:53:03 Click on the save button
    07:53:11 Click on the download button and download excel file
    07:53:26 Save the Data in the Setup Wizard
    07:58:27 Test FailOpenQA.Selenium.WebDriverTimeoutException : Timed out after 300 seconds ----> OpenQA.Selenium.NoSuchElementException : no such element: Unable to locate element: {"method":"xpath","selector":"//a[normalize-space()='Start from Scratch']"} (Session info: chrome=131.0.6778.140); For documentation on this error, please visit: https://www.selenium.dev/documentation/webdriver/troubleshooting/errors#no-such-element-exception
    07:58:27 base64-img
  • Min and Max settings for Trim(Roofing Passport)

    0h:2m:44s+962ms

    07:58:41 AM
    Min and Max settings for Trim(Roofing Passport)
    2024-12-20 07:58:41 2024-12-20 08:01:26 0h:2m:44s+962ms
    Status Timestamp Details
    07:58:41 Log in to AUTOTEST_EAGLEVIEW BASE Distributor
    07:58:42 Click on th setting button
    07:58:47 Navigate to the setup wizard
    07:58:48 Click on the 'Trim' tab
    07:58:59 Click on the add button
    07:59:01 Enter Test Trim 1 in the sku input field
    07:59:02 Enter Test Trim 1 in the description input field
    07:59:02 Enter 1 in the width input field
    07:59:03 Enter 0.25 in the width input field
    07:59:04 Enter 36 in the maximum length input field
    07:59:06 Enter 36 in the maximum length input field
    07:59:08 Select All element from usage table
    07:59:10 Select All element from usage table
    07:59:11 Click on the 'Part Length' button
    07:59:11 Click on the save button
    07:59:13 Click on the add button
    07:59:14 Enter Min and Max Trim in the sku input field
    07:59:15 Enter Min and Max Trim in the description input field
    07:59:15 Enter 1 in the width input field
    07:59:16 Enter 0.25 in the width input field
    07:59:17 Enter 24 in the maximum length input field
    07:59:19 Enter 36 in the maximum length input field
    07:59:21 Select All element from usage table
    07:59:22 Select All element from usage table
    07:59:25 Enter the cost in the pricings table
    07:59:28 Enter the price in the pricings table
    07:59:34 Enter value in the Part Length
    07:59:35 Click on the save button
    07:59:39 Click on the download button and download excel file
    07:59:50 Save the Data in the Setup Wizard
    07:59:53 Click on the job tab
    08:00:04 open Zombie Parts job
    08:00:11 Click on the ''details' tab'
    08:00:13 Click on the 'Roof trim tab'
    08:00:17 Select Test Trim 1 from the eave edge trim dropdown
    08:00:21 Select Test Trim 1 from the hip ridge cap dropdown
    08:00:29 Click on the 'Drawing' tab
    08:00:30 Click on the 'Cladding Drawing ROOF_3' tab'
    08:00:31 Verify that the EaveEdge Minimum Length value is 3' without part length
    08:00:31 Verify that the HipCap Minimum Length value is 3' without part length
    08:00:34 Select Min and Max Trim from the eave edge trim dropdown
    08:00:38 Select Min and Max Trim from the hip ridge cap dropdown
    08:00:41 Verify that the EaveEdge Maximum Length value is 18' with part length
    08:00:41 Verify that the EaveEdge Minimum Length value is 12' with part length
    08:00:41 Verify that the HipCap Maximum Length value is 12' with part length
    08:00:44 Click on th setting button
    08:00:49 Navigate to the setup wizard
    08:00:50 Click on the 'Trim' tab
    08:01:02 Delete Test Trim 1 data from setup wizard
    08:01:14 Delete Min and Max Trim data from setup wizard
    08:01:26 Save the Data in the Setup Wizard
    08:01:26 Test Pass
  • Angled Roof Cladding Extension Value Not Adding To Panel Length

    0h:2m:39s+826ms

    08:03:19 AM
    Angled Roof Cladding Extension Value Not Adding To Panel Length
    2024-12-20 08:03:19 2024-12-20 08:05:59 0h:2m:39s+826ms
    Status Timestamp Details
    08:03:19 Log in to AUTOTEST_EAGLEVIEW Base Distributor for Test Environment
    08:03:20 Click on the job tab
    08:03:32 open Zombie Parts job
    08:03:39 Click on the 'Drawing' tab
    08:03:40 Click on the 'Cladding Drawing ROOF_6' tab'
    08:03:42 Click on the ''details' tab'
    08:03:43 Click on the ''Cladding' tab'
    08:03:44 Enter 1' in the Angled Roof Cladding Extension field
    08:03:50 Get the length of elements from sheathing drawing roof-6 table
    08:03:50 Exterior roof length is updated after apply angled roof cladding extension
    08:03:50 Get the length of elements from sheathing drawing roof-6 table
    08:03:52 Click on the 'job review button' tab
    08:03:53 Click on the 'Cladding tab'
    08:03:55 Verify that the sheathing drawing of length '4' 1 15/16"' found in the cladding length column.
    08:03:58 Verify that the sheathing drawing of length '7' 3 7/8"' found in the cladding length column.
    08:04:00 Verify that the sheathing drawing of length '10' 5 13/16"' found in the cladding length column.
    08:04:02 Verify that the sheathing drawing of length '13' 7 3/4"' found in the cladding length column.
    08:04:04 Verify that the sheathing drawing of length '16' 9 11/16"' found in the cladding length column.
    08:04:06 Verify that the sheathing drawing of length '18' 2 9/16"' found in the cladding length column.
    08:04:08 Verify that the sheathing drawing of length '16' 5 1/2"' found in the cladding length column.
    08:04:11 Verify that the sheathing drawing of length '13' 3 9/16"' found in the cladding length column.
    08:04:13 Verify that the sheathing drawing of length '10' 1 5/8"' found in the cladding length column.
    08:04:15 Verify that the sheathing drawing of length '6' 11 11/16"' found in the cladding length column.
    08:04:18 Verify that the sheathing drawing of length '3' 9 3/4"' found in the cladding length column.
    08:04:19 Click on the ''Canvas 3D View'' tab
    08:04:43 Click on the save button
    08:04:45 Click on the outputs button
    08:04:46 Check the Cladding Drawings checkbox
    08:04:51 Click on the download button
    08:05:26 Verify PDF File is downloaded
    08:05:26 Verify that the updated length of Roof-6 is shown in the cladding drawing pdf.
    08:05:27 Enter 0 in the Angled Roof Cladding Extension field
    08:05:50 Click on the save button
    08:05:51 Click on the 'Job List' button'
    08:05:59 Test Pass
  • Round Sheathing and Round Angled Sheathing must apply to job drawings, material list and pricing

    0h:2m:49s+984ms

    08:07:49 AM
    Round Sheathing and Round Angled Sheathing must apply to job drawings, material list and pricing
    2024-12-20 08:07:49 2024-12-20 08:10:39 0h:2m:49s+984ms
    Status Timestamp Details
    08:07:49 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    08:07:53 Click on the job tab
    08:08:04 open PFS-4510Test job
    08:08:22 Click on the ''details' tab'
    08:08:24 Click on the 'wall sheathing tab'
    08:08:24 Enter 0' in the round angled sheathing field
    08:08:25 Enter 0' in the round sheathing field
    08:08:37 Click on the 'Drawing' tab
    08:08:39 Click on the ''Sheathing Drawing EXT_4' tab'
    08:08:40 Enter 1' in the round angled sheathing field
    08:08:40 Enter 1' in the round sheathing field
    08:08:44 Get the length of elements from sheathing drawing EXT-4 table
    08:08:44 Exterior Wall length is updated after apply round angled sheathing
    08:08:44 Get the length of elements from sheathing drawing EXT-4 table
    08:08:46 Click on the 'job review button' tab
    08:08:47 Click on the 'sheathing tab'
    08:08:49 Verify that the sheathing drawing of length '15'' found in the Sheathing length column.
    08:08:49 Verify that the sheathing drawing of length '16'' found in the Sheathing length column.
    08:08:49 Verify that the sheathing drawing of length '17'' found in the Sheathing length column.
    08:08:49 Verify that the sheathing drawing of length '18'' found in the Sheathing length column.
    08:08:49 Verify that the sheathing drawing of length '19'' found in the Sheathing length column.
    08:08:49 Verify that the sheathing drawing of length '19'' found in the Sheathing length column.
    08:08:49 Verify that the sheathing drawing of length '18'' found in the Sheathing length column.
    08:08:49 Verify that the sheathing drawing of length '17'' found in the Sheathing length column.
    08:08:49 Verify that the sheathing drawing of length '16'' found in the Sheathing length column.
    08:08:50 Verify that the sheathing drawing of length '15'' found in the Sheathing length column.
    08:08:51 Click on the ''Canvas 3D View'' tab
    08:09:11 Click on the save button
    08:09:13 Click on the outputs button
    08:09:15 Check the Sheathing Drawings checkbox
    08:09:32 Click on the download button
    08:10:08 Verify that the updated length of Sheathing Drawing (EXT-4) is shown in the Sheathing drawing pdf.
    08:10:08 Enter 0' in the round angled sheathing field
    08:10:09 Enter 0' in the round sheathing field
    08:10:39 Click on the save button
    08:10:39 Test Pass
  • HOT PATCH: Job crashes if building is resized and cause lofts to no longer be in building

    0h:2m:54s+279ms

    08:12:30 AM
    HOT PATCH: Job crashes if building is resized and cause lofts to no longer be in building
    2024-12-20 08:12:30 2024-12-20 08:15:24 0h:2m:54s+279ms
    Status Timestamp Details
    08:12:30 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    08:12:46 Click on the start from scratch
    08:12:57 Click on the 'Building Size' tab
    08:13:03 Set 30' x 60' to the 'Building Size' dropdown
    08:13:10 Click on the '2D View' tab
    08:13:12 Click on the 'Lofts'
    08:13:13 Click on the 'Add Button' tab
    08:13:21 Click on the Return button
    08:13:23 Click on the yes button
    08:13:33 Click on the 'Building Size' tab
    08:13:39 Set 20' x 20' to the 'Building Size' dropdown
    08:13:45 Verify that the error messages are not shown after resizing the building size.
    08:13:46 Click on the '2D View' tab
    08:13:47 Click on the 'Lofts'
    08:13:50 Verify that the loft is visible outside the building in the 2D view
    08:13:53 Click on the Return button
    08:13:56 Click on the 'job button' tab
    08:13:57 Enter PFS-4488 in the job name field
    08:14:22 Click on the save button
    08:14:23 Click on the change view button
    08:14:23 Click on the Front Left
    08:14:27 Click on the 'home button'
    08:14:31 Click on the job tab
    08:14:41 open PFS-4488 job
    08:14:56 Verify that the error messages are not shown after re-open the newly created job
    08:14:58 Click on the change view button
    08:14:58 Click on the Front Left
    08:15:00 Verify that the loft has changed when the user re-opens the newly created job
    08:15:04 Click on the 'home button'
    08:15:08 Click on the job tab
    08:15:14 open PFS-4488 job
    08:15:15 Click on the Delete button
    08:15:16 Click on the yes button
    08:15:19 Confirm Deletion
    08:15:24 Test Pass
  • Add new document template {tokens} Accent Colors

    0h:0m:54s+615ms

    08:17:14 AM
    Add new document template {tokens} Accent Colors
    2024-12-20 08:17:14 2024-12-20 08:18:09 0h:0m:54s+615ms
    Status Timestamp Details
    08:17:14 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    08:17:18 Click on the job tab
    08:17:30 open ColorToken job
    08:17:44 Click on the 'Colors' tab
    08:17:45 Get the names of Roof, Wall,Trim, Accent 1, Accent 2, Accent 3, and Accent 4 Colors.
    08:17:47 Click on the outputs button
    08:17:48 Check the Document Template NEW checkbox
    08:18:07 Click on the download button
    08:18:09 verify the document file is successfully downloaded.
    08:18:09 Verify that the names of Roof, Trim, Wall, Accent 1, Accent 2,Accent 3, and Accent 4 Colors match with ColorToken job colors
    08:18:09 Test Pass
  • Open Wall Top of Wall Trim

    0h:2m:19s+441ms

    08:19:59 AM
    Open Wall Top of Wall Trim
    2024-12-20 08:19:59 2024-12-20 08:22:19 0h:2m:19s+441ms
    Status Timestamp Details
    08:19:59 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    08:20:01 Click on th setting button
    08:20:04 Navigate to the framing rules
    08:20:06 Click on the AUTOTEST_PHTEST framing rules edit button
    08:20:13 Click on the details tab
    08:20:15 Verify that OpenTopOfWallTrim, OpenTopOfWallLengthOverrides, OpenTopOfWallTrimColor questions are shown in the open wall trim field
    08:20:18 Navigate to the home page
    08:20:49 Click on the 'Building Size' tab
    08:20:55 Set 2' to the 'overhang' dropdown
    08:20:57 Click on the ''details' tab'
    08:20:58 Click on the 'open wall trim tab'
    08:20:58 Verify that Open Wall of Wall Trim set as a (match Top Of Wall)
    08:21:02 Select 3/4" x 3/4" Angle+ from the open top of wall trim dropdown
    08:21:11 Click on the ''Open Wall' tab'
    08:21:28 Click on the 'job review button' tab
    08:21:29 Click on the 'Trim tab'
    08:21:30 Verify Open Top of Wall trim is on the list and show the 3 / 4” x 3 / 4” Angle material
    08:21:32 Click on the 'Drawing' tab
    08:21:33 Click on the 'Sheathing Drawing EXT_1' tab'
    08:21:33 Verify the Sheathing Drawings for EXT 1 Shows the 3/4” x 3/4” Angle material.
    08:21:34 Click on the ''Canvas 3D View'' tab
    08:21:38 Select None from the open top of wall trim dropdown
    08:21:39 Enter 3 in the Open wall offset field
    08:21:51 Click on the 'Drawing' tab
    08:21:52 Click on the 'Sheathing Drawing EXT_1' tab'
    08:21:52 Verify that Open Top of Wall Trim Set to None does not input any trim part to the top of walls with soffits.
    08:21:53 Click on the ''Canvas 3D View'' tab
    08:21:57 Select (match Top Of Wall) from the open top of wall trim dropdown
    08:21:59 Click on the 'wall trim tab'
    08:21:59 Select Ceiling Double J from open top of wall trim
    08:22:09 Click on the 'Drawing' tab
    08:22:10 Click on the 'Sheathing Drawing EXT_1' tab'
    08:22:10 Verify that Open Wall Top of Wall trim shown as the Ceiling Double J in the Sheathing Drawings EXT 1 table
    08:22:12 Click on the 'open wall trim tab'
    08:22:13 Enter 12,14 in the Open top of wall field
    08:22:19 Verify the OpenTopofWall material is only using 14' and 12' pieces on a 20x20
    08:22:19 Test Pass
  • Adding an inch sign " to the Package question doesn't seed the default answer

    0h:1m:49s+811ms

    08:24:10 AM
    Adding an inch sign " to the Package question doesn't seed the default answer
    2024-12-20 08:24:10 2024-12-20 08:26:00 0h:1m:49s+811ms
    Status Timestamp Details
    08:24:10 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    08:24:12 Click on th setting button
    08:24:15 Navigate to the job page
    08:24:16 Click on the add new button
    08:24:16 Click on the blank button
    08:24:18 Enter Driveway in the package name field
    08:24:20 Click on the 'add catalog button' tab
    08:24:24 Select Accessories from the output category dropdown
    08:24:29 Select Foundation from the catalog category dropdown
    08:24:33 Select 1 m cube gravel from the catalog item dropdown
    08:24:35 Enter (({?DEPTH 1"? (Inches):4}/12){?Width(Feet):10}{?Length (Feet):10})/27 in the calculation field
    08:24:36 Enter DoubleQuotation in the usage field
    08:24:39 Click on the add misc button
    08:24:50 Click on the save button
    08:25:06 Click on the start from scratch
    08:25:17 Click on the 'package' tab
    08:25:22 Verify that the default value shown in the DEPTH 1”? (Inches)
    08:25:23 Click on the OK button
    08:25:38 Click on the 'job review button' tab
    08:25:39 Click on the 'Accessories tab'
    08:25:40 Verify that the newly created package is shown in the Accessories table
    08:25:44 Click on th setting button
    08:25:46 Navigate to the job page
    08:25:49 Delete Driveway package
    08:26:00 Click on the save button
    08:26:00 Test Pass
  • HOT PATCH - Open wall gets filled with post

    0h:1m:24s+018ms

    08:27:50 AM
    HOT PATCH - Open wall gets filled with post
    2024-12-20 08:27:50 2024-12-20 08:29:14 0h:1m:24s+018ms
    Status Timestamp Details
    08:27:50 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    08:28:07 Click on the start from scratch
    08:28:18 Click on the 'Building Size' tab
    08:28:22 Set Outside of Post to the 'Measure From' dropdown
    08:28:23 Enter 30 in the width field
    08:28:24 Enter 30 in the length field
    08:28:26 Click on the ''details' tab'
    08:28:27 Click on the ''bays' tab'
    08:28:27 Check the 'Use Bays Spacing' checkbox
    08:28:31 Set 10' to the 'Bays Spacing' dropdown
    08:28:35 Set Front to the 'Bays Placement' dropdown
    08:28:44 Click on the 'Attached Building' tab
    08:28:45 Enter 0 in the start field
    08:28:46 Enter 30 in the length field
    08:28:52 Set Offset Down to the 'Height' dropdown
    08:28:52 Check the 'Advanced' checkbox
    08:28:52 Check the 'Use Bay Spacing Checkbox For Opening' checkbox
    08:28:56 Set Custom... to the 'bay placement' dropdown
    08:28:57 Enter 12.125 in the Bay Lengths field
    08:28:59 Click on the apply button
    08:29:00 Click on the change view button
    08:29:00 Click on the Front Right
    08:29:12 Click on the 'Drawing' tab
    08:29:13 Click on the ''Assembly Drawing EXT_1''
    08:29:14 Click on the ''Assembly Drawing EXT_3''
    08:29:14 Verify that the attached building's portion of the wall does not contain any mid-span posts
    08:29:14 Test Pass
  • Truss Carrier Override lengths not honored in Advanced Edit

    0h:1m:31s+078ms

    08:31:05 AM
    Truss Carrier Override lengths not honored in Advanced Edit
    2024-12-20 08:31:05 2024-12-20 08:32:36 0h:1m:31s+078ms
    Status Timestamp Details
    08:31:05 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    08:31:22 Click on the start from scratch
    08:31:34 Click on the 'Porch' tab
    08:31:35 Click on the 'Left'
    08:31:37 Click on the apply button
    08:31:46 Click on the ''details' tab'
    08:31:48 Click on the 'Truss Carrier tab'
    08:31:52 Select 14 LVL from the truss carrier material dropdown
    08:31:52 Enter 20' in the Truss carrier length overrides field
    08:31:59 Click on the 'job review button' tab
    08:32:00 Click on the 'Framing tab'
    08:32:03 Verify that the truss carrier length overrides are applied on all EXT walls
    08:32:04 Click on the 'Drawing' tab
    08:32:06 Click on the ''Assembly Drawing EXT_6''
    08:32:06 Verify that the same cut length is shown in the Assembly of drawing
    08:32:07 Click on the 'advanced edit tab'
    08:32:09 Click on the 'EXT_6 tab'
    08:32:12 Click on the ''details' tab'
    08:32:14 Click on the 'Truss Carrier tab'
    08:32:18 Select BAR JOIST from the truss carrier material dropdown
    08:32:19 Enter 30' in the Truss carrier length overrides field
    08:32:27 Click on the 'job review button' tab
    08:32:28 Click on the 'Framing tab'
    08:32:33 Verify that the Advanced Edit length overrides are applied to the EXT-6 wall.
    08:32:35 Click on the 'Drawing' tab
    08:32:36 Click on the ''Assembly Drawing EXT_6''
    08:32:36 Verify that the same cut length is shown in the Assembly of drawing
    08:32:36 Test Pass
  • 2 packages that had the same first 20 or so characters pricing mix up

    0h:1m:36s+469ms

    08:34:28 AM
    2 packages that had the same first 20 or so characters pricing mix up
    2024-12-20 08:34:28 2024-12-20 08:36:04 0h:1m:36s+469ms
    Status Timestamp Details
    08:34:28 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    08:34:29 Click on th setting button
    08:34:32 Navigate to the job page
    08:34:34 Click on the add new button
    08:34:34 Click on the blank button
    08:34:36 Enter Interior Concrete in the package name field
    08:34:42 Select Option from the packages type dropdown
    08:34:46 Select Hidden from the default setting dropdown
    08:34:47 Click on the 'add catalog button' tab
    08:34:52 Select Accessories from the output category dropdown
    08:34:57 Select Hardware from the catalog category dropdown
    08:35:01 Select FMW10035 ARCTIC RIDGE VENT from the catalog item dropdown
    08:35:05 Enter RIDGE VENT in the usage field
    08:35:07 Click on the add misc button
    08:35:10 Click on the add new button
    08:35:11 Click on the blank button
    08:35:12 Enter Interior Concrete Insulation in the package name field
    08:35:18 Select Option from the packages type dropdown
    08:35:22 Select Hidden from the default setting dropdown
    08:35:23 Click on the 'add catalog button' tab
    08:35:28 Select Accessories from the output category dropdown
    08:35:33 Select Hardware from the catalog category dropdown
    08:35:37 Select FMW10035 ARCTIC RIDGE VENT from the catalog item dropdown
    08:35:41 Enter RIDGE VENT in the usage field
    08:35:44 Click on the add misc button
    08:35:47 Click on the add new button
    08:35:47 Click on the blank button
    08:35:49 Enter Exterior Concrete in the package name field
    08:35:55 Select Option from the packages type dropdown
    08:35:58 Select Hidden from the default setting dropdown
    08:36:00 Click on the 'add catalog button' tab
    08:36:04 Test Fail Accessories is not shown in the dropdown Expected: False But was: True
    08:36:04 base64-img
  • Delete packages

    0h:0m:11s+770ms

    08:36:13 AM
    Delete packages
    2024-12-20 08:36:13 2024-12-20 08:36:25 0h:0m:11s+770ms
    Status Timestamp Details
    08:36:13 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    08:36:14 Click on th setting button
    08:36:17 Navigate to the job page
    08:36:21 Click on the job tab
    08:36:25 Test FailPackages is not shown in the jobs table
    08:36:25 base64-img
  • Add Cantilever Porch tokens

    0h:1m:8s+373ms

    08:38:15 AM
    Add Cantilever Porch tokens
    2024-12-20 08:38:15 2024-12-20 08:39:24 0h:1m:8s+373ms
    Status Timestamp Details
    08:38:15 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    08:38:31 Click on the start from scratch
    08:38:44 Click on the 'job review button' tab
    08:38:46 Click on the 'Accessories tab'
    08:38:47 Click on the 'add misc button' tab
    08:38:48 Enter TestUsage in the usage field
    08:38:49 Enter TestSKU in the sku field
    08:38:50 Enter 0 in the cost field
    08:38:51 Enter TestMaterial in the material field
    08:38:51 Enter 0 in the price field
    08:38:52 Enter 1000 + in the calculation field
    08:38:54 Click on the 'Curly bracket button'
    08:38:59 Click on the 'Curly bracket button'
    08:39:03 Click on the 'Save button'
    08:39:08 Click on the save button
    08:39:08 Apply cantilever on canvas building without attached porch and calculation is 2200
    08:39:10 Click on the ''Canvas 3D View'' tab
    08:39:11 Click on the 'Cant Porch Tab'
    08:39:12 Apply cant porch on the canvas building and cant porch calculation is 64
    08:39:22 Click on the 'job review button' tab
    08:39:24 Click on the 'Accessories tab'
    08:39:24 Verify that the cantilever calculation 2136 is correct shown in the job review after attached cant porch in canvas building
    08:39:24 Test Pass
  • Clear out "Pencils" on Re-Quoted Jobs Advanced Edit

    0h:3m:52s+337ms

    08:41:14 AM
    Clear out "Pencils" on Re-Quoted Jobs Advanced Edit
    2024-12-20 08:41:14 2024-12-20 08:45:06 0h:3m:52s+337ms
    Status Timestamp Details
    08:41:14 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    08:41:30 Click on the start from scratch
    08:41:43 Click on the 'advanced edit tab'
    08:41:45 Click on the 'EXT_1 tab'
    08:41:48 Click on the ''details' tab'
    08:41:50 Click on the 'wall framing tab'
    08:41:54 Select 2x4RL element from the post material dropdown
    08:42:03 Click on the ''Canvas 3D View'' tab
    08:42:06 Click on the 'job button' tab
    08:42:07 Enter ClearPencil in the job name field
    08:42:39 Click on the save button
    08:42:40 Click on the 'Make Quote' tab
    08:42:57 Click on the 'yes' button
    08:43:01 Click on the job tab
    08:43:01 Click on the ClearPencil Job
    08:43:02 Click on the re-quoted button
    08:43:11 Click on the yes button
    08:43:23 open ClearPencil rev. 3 job
    08:43:40 Click on the 'advanced edit tab'
    08:43:40 Verify that the pencil icon shown only the EXT-1 wall for the re-quoted job.
    08:43:47 Click on the job tab
    08:43:50 Navigate to the 'Jobs' page
    08:43:51 Click on the (---) button
    08:43:52 Click on the Copy button
    08:43:59 Click on the yes button
    08:44:11 open ClearPencil rev. 3 copy 1 job
    08:44:28 Click on the 'advanced edit tab'
    08:44:28 Verify that the pencil icon shown only the EXT-1 wall for the copy job.
    08:44:36 Click on the job tab
    08:44:41 open ClearPencil rev. 3 copy 1 job
    08:44:42 Click on the Delete button
    08:44:44 Click on the yes button
    08:44:46 Confirm Deletion
    08:44:56 open ClearPencil rev. 3 job
    08:44:57 Click on the Delete button
    08:44:59 Click on the yes button
    08:45:01 Confirm Deletion
    08:45:06 Test Pass
  • Case 1: Check for the Loft

    0h:2m:32s+739ms

    08:46:56 AM
    Case 1: Check for the Loft
    2024-12-20 08:46:56 2024-12-20 08:49:29 0h:2m:32s+739ms
    Status Timestamp Details
    08:46:56 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    08:47:13 Click on the start from scratch
    08:47:26 Click on the ''details' tab'
    08:47:27 Click on the Floor Framing tab
    08:47:28 Click on the Floor Sheathing tab
    08:47:28 Get the default value of joist material and floor sheathing
    08:47:30 Click on the '2D View' tab
    08:47:31 Click on the 'Lofts'
    08:47:33 Click on the 'Add Button' tab
    08:47:35 Verify that the Joist Material and Floor Sheathing Material are set to their default values.
    08:47:40 Click on the Return button
    08:47:43 Click on the yes button
    08:47:59 Click on the 'job review button' tab
    08:48:00 Click on the 'Framing tab'
    08:48:03 Verify that Joist material is update in the framing.
    08:48:04 Click on the 'sheathing tab'
    08:48:07 Verify that floor sheathing material is update in the sheathing.
    08:48:08 Click on the '2D View' tab
    08:48:09 Click on the 'Lofts'
    08:48:11 Double click on the attached loft
    08:48:17 Set 4Ply2x8 material to the joist material dropdown
    08:48:22 Set Brick_Tex_48 material to the floor sheathing material dropdown
    08:48:23 Click on the 'Update'
    08:48:26 Click on the Return button
    08:48:28 Click on the yes button
    08:48:40 Click on the 'job review button' tab
    08:48:42 Click on the 'Framing tab'
    08:48:44 Verify that Joist material is update in the framing.
    08:48:46 Click on the 'sheathing tab'
    08:48:48 Verify that floor sheathing material is update in the sheathing.
    08:48:50 Click on the '2D View' tab
    08:48:51 Click on the 'Lofts'
    08:48:53 Double click on the attached loft
    08:48:58 Set 2x8 TREATED PWF material to the joist material dropdown
    08:49:03 Set 3/4" T-G OSB material to the floor sheathing material dropdown
    08:49:05 Click on the 'Update'
    08:49:07 Click on the Return button
    08:49:10 Click on the yes button
    08:49:21 Click on the 'job review button' tab
    08:49:22 Click on the 'Framing tab'
    08:49:25 Verify that Joist material is update in the framing.
    08:49:26 Click on the 'sheathing tab'
    08:49:29 Verify that floor sheathing material is update in the sheathing.
  • Case 2: Check for the Interior Wall

    0h:2m:59s+064ms

    08:49:29 AM
    Case 2: Check for the Interior Wall
    2024-12-20 08:49:29 2024-12-20 08:52:28 0h:2m:59s+064ms
    Status Timestamp Details
    08:49:47 Click on the ''details' tab'
    08:49:48 Click on the Interior Stud Framing tab
    08:49:48 Get the interior stud material from 3D view
    08:50:07 Set (interior stud) to the Interior Top Plate, Interior Very Top Plate, Interior Very Bottom Plate, and Interior Bottom Plate dropdowns
    08:50:14 Click on the '2D View' tab
    08:50:16 Click on the interior walls tab
    08:50:18 Verify that the Interior Stud Framing default material is shown in the interior wall pop
    08:50:21 Place interior wall on the 2D canvas building
    08:50:25 Click on the Return button
    08:50:27 Click on the yes button
    08:50:37 Click on the 'job review button' tab
    08:50:39 Click on the 'Framing tab'
    08:50:56 Verify that Stud, Top plat, Bottom plate, and Very Bottom Plate material are update in the framing.
    08:50:57 Click on the '2D View' tab
    08:51:00 Click on the interior walls tab
    08:51:01 Double click on the attached interior wall
    08:51:09 Set 1.5x3.5Cee Shape material to the Interior Stud Material dropdown
    08:51:11 Click on the 'Update'
    08:51:13 Click on the Return button
    08:51:15 Click on the yes button
    08:51:27 Click on the 'job review button' tab
    08:51:29 Click on the 'Framing tab'
    08:51:40 Click on the '2D View' tab
    08:51:42 Click on the interior walls tab
    08:51:44 Double click on the attached interior wall
    08:51:51 Set 2x4 material to the Interior Stud Material dropdown
    08:51:53 Click on the 'Update'
    08:51:56 Click on the Return button
    08:51:58 Click on the yes button
    08:52:10 Click on the 'job review button' tab
    08:52:11 Click on the 'Framing tab'
    08:52:28 Test Pass
  • Maintain Exterior Wall Height when using sloped overhang soffit panels

    0h:1m:27s+310ms

    08:54:19 AM
    Maintain Exterior Wall Height when using sloped overhang soffit panels
    2024-12-20 08:54:19 2024-12-20 08:55:46 0h:1m:27s+310ms
    Status Timestamp Details
    08:54:19 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    08:54:35 Click on the start from scratch
    08:54:47 Click on the ''Wainscot' tab'
    08:54:47 Uncheck the 'Has Wainscot' checkbox
    08:54:48 Click on the 'Building Size' tab
    08:54:51 Set Top Of Wall Material to the 'Roof Height Style' dropdown
    08:54:52 Enter 12' in the exterior metal height field
    08:55:01 Click on the 'Drawing' tab
    08:55:02 Click on the 'Sheathing Drawing EXT_1' tab'
    08:55:02 Verify that the length of the exterior walls is 12 feet.
    08:55:04 Click on the ''details' tab'
    08:55:06 Click on the 'Fascia And Soffit'
    08:55:09 Select Panels from the soffit style dropdown
    08:55:15 Click on the 'Main Building Tab'
    08:55:16 Click on the 'Building Size' tab
    08:55:22 Set 2' to the 'overhang' dropdown
    08:55:26 Verify that the exterior wall lengths remain constant after adding overhangs to the canvas building.
    08:55:27 Click on the ''Canvas 3D View'' tab
    08:55:29 Click on the change view button
    08:55:29 Click on the Front Left
    08:55:32 Click on the ''details' tab'
    08:55:33 Click on the 'Fascia And Soffit'
    08:55:37 Select Sloped Panels from the soffit style dropdown
    08:55:42 Click on the change view button
    08:55:43 Click on the Front Left
    08:55:45 Click on the 'Drawing' tab
    08:55:46 Click on the 'Sheathing Drawing EXT_1' tab'
    08:55:46 Verify that the exterior wall lengths remain constant after applying Sloped Panels to the canvas building.
    08:55:46 Test Pass
  • Interior Girt override length doesn't work

    0h:1m:46s+027ms

    08:57:37 AM
    Interior Girt override length doesn't work
    2024-12-20 08:57:37 2024-12-20 08:59:23 0h:1m:46s+027ms
    Status Timestamp Details
    08:57:37 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    08:57:55 Click on the start from scratch
    08:58:07 Click on the '2D View' tab
    08:58:08 Click on the 'Interior Wall'
    08:58:09 Click on the 'Add Room' tab
    08:58:12 Place interior wall on the 2D canvas building
    08:58:16 Click on the Return button
    08:58:18 Click on the yes button
    08:58:30 Click on the 'Wall Liner' tab
    08:58:31 Check interior has liner checkbox
    08:58:34 Click on the ''details' tab'
    08:58:35 Click on the Interior Girt Framing tab
    08:58:38 Select Zee Rotated from the interior girt material dropdown
    08:58:50 Click on the 'job review button' tab
    08:58:52 Click on the 'Framing tab'
    08:58:55 Verify that the Interior girt length is shown as the main building length of the interior girt
    08:58:56 Click on the 'advanced edit tab'
    08:59:02 Click on the ''details' tab'
    08:59:06 Select 2x4 from the interior girt material dropdown
    08:59:16 Click on the 'job review button' tab
    08:59:18 Click on the 'Framing tab'
    08:59:23 Verify the interior girt length of the main building and Advanced Edit shown in the job review.
    08:59:23 Verify interior girt overrides is apply on the canvas building
    08:59:23 Test Pass
  • Truss Catalog range of overhangs (minimum and maximum)

    0h:6m:40s+799ms

    09:01:14 AM
    Truss Catalog range of overhangs (minimum and maximum)
    2024-12-20 09:01:14 2024-12-20 09:07:55 0h:6m:40s+799ms
    Status Timestamp Details
    09:01:14 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    09:01:16 Click on th setting button
    09:01:17 Navigate to the trusses page
    09:02:01 Verify that the minimum and maximum values of the C19P4HH12OH1SP4L20-10-10 material are the same.
    09:02:19 Click on the start from scratch
    09:02:31 Click on the 'Building Size' tab
    09:02:32 Enter 19 in the length field
    09:02:33 Enter 19 in the width field
    09:02:39 Set 1' to the 'overhang' dropdown
    09:02:41 Click on the ''details' tab'
    09:02:42 Click on the 'Roof Framing' tab'
    09:02:43 Enter 1 in the truss heel height field
    09:02:52 Click on the 'job review button' tab
    09:02:53 Click on the 'trusses tab'
    09:07:55 Test FailOpenQA.Selenium.WebDriverTimeoutException : Timed out after 300 seconds ----> OpenQA.Selenium.NoSuchElementException : no such element: Unable to locate element: {"method":"xpath","selector":"(//tr[contains(@id,'grid_MaterialsGrid_rec_')]//div[text()='C19P4HH12OH1SP4L20-10-10GB'])[1]"} (Session info: chrome=131.0.6778.140); For documentation on this error, please visit: https://www.selenium.dev/documentation/webdriver/troubleshooting/errors#no-such-element-exception
    09:07:55 base64-img
  • Delete Material

    0h:0m:25s+370ms

    09:08:05 AM
    Delete Material
    2024-12-20 09:08:05 2024-12-20 09:08:31 0h:0m:25s+370ms
    Status Timestamp Details
    09:08:05 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    09:08:06 Click on th setting button
    09:08:08 Navigate to the trusses page
    09:08:31 Test Pass
  • Add 'Eave Edge' as a Trim Margin option

    0h:1m:3s+796ms

    09:10:21 AM
    Add 'Eave Edge' as a Trim Margin option
    2024-12-20 09:10:21 2024-12-20 09:11:25 0h:1m:3s+796ms
    Status Timestamp Details
    09:10:21 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    09:10:45 Click on the start from scratch
    09:11:03 Click on the ''details' tab'
    09:11:04 Click on the 'Roof trim tab'
    09:11:08 Select Part Length Trim from the eave edge trim dropdown
    09:11:17 Click on the 'Trim Margins tab'
    09:11:18 Click on the 'job review button' tab
    09:11:19 Click on the 'Trim tab'
    09:11:21 Enter 5' in the Eave Edge field
    09:11:25 Verify that after applying the Eave Edge material, the cut length for the Eave Edge has increased by at least 5.
    09:11:25 Test Pass
  • Excel workbook does not support ' in output category names

    0h:0m:45s+766ms

    09:13:15 AM
    Excel workbook does not support ' in output category names
    2024-12-20 09:13:15 2024-12-20 09:14:01 0h:0m:45s+766ms
    Status Timestamp Details
    09:13:15 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    09:13:17 Click on th setting button
    09:13:18 Navigate to the Output Categories page
    09:13:20 Click on the 'Add' button
    09:13:20 Enter Test ' in the last row of output categories table field
    09:13:21 Verified that the "use '(apostrophe) as its first or last character" error message appears when the user enters ' in the input field.
    09:13:22 Click on the 'Ok' button
    09:13:24 Enter Test ; in the last row of output categories table field
    09:13:25 Verified that the "use '(apostrophe) as its first or last character" error message appears when the user enters ; in the input field.
    09:13:26 Click on the 'Ok' button
    09:13:28 Enter Test = in the last row of output categories table field
    09:13:28 Verified that the "use '(apostrophe) as its first or last character" error message appears when the user enters = in the input field.
    09:13:30 Click on the 'Ok' button
    09:13:32 Enter Test : in the last row of output categories table field
    09:13:32 Verified that the "use '(apostrophe) as its first or last character" error message appears when the user enters : in the input field.
    09:13:34 Click on the 'Ok' button
    09:13:35 Enter Test [ ] in the last row of output categories table field
    09:13:36 Verified that the "use '(apostrophe) as its first or last character" error message appears when the user enters [ ] in the input field.
    09:13:37 Click on the 'Ok' button
    09:13:39 Enter Test * in the last row of output categories table field
    09:13:40 Verified that the "use '(apostrophe) as its first or last character" error message appears when the user enters * in the input field.
    09:13:41 Click on the 'Ok' button
    09:13:43 Enter Test ? in the last row of output categories table field
    09:13:43 Verified that the "use '(apostrophe) as its first or last character" error message appears when the user enters ? in the input field.
    09:13:45 Click on the 'Ok' button
    09:13:46 Enter Test / in the last row of output categories table field
    09:13:47 Verified that the "use '(apostrophe) as its first or last character" error message appears when the user enters / in the input field.
    09:13:48 Click on the 'Ok' button
    09:13:50 Enter Trim in the last row of output categories table field
    09:13:51 Verified that the "Duplicate Value" error message appears when the user enters Trim in the input field.
    09:13:52 Click on the 'Ok' button
    09:13:54 Enter TRIM in the last row of output categories table field
    09:13:54 Verified that the "Duplicate Value" error message appears when the user enters TRIM in the input field.
    09:13:56 Click on the 'Ok' button
    09:13:58 Enter trim in the last row of output categories table field
    09:13:58 Verified that the "Duplicate Value" error message appears when the user enters trim in the input field.
    09:14:00 Click on the 'Ok' button
    09:14:01 Click on the 'save' button
    09:14:01 Verified that an alert message is shown to the user if any output category name is empty.
    09:14:01 Test Pass
  • Fix issues with hidden materials

    0h:0m:7s+531ms

    09:15:51 AM
    Fix issues with hidden materials
    2024-12-20 09:15:51 2024-12-20 09:15:59 0h:0m:7s+531ms
    Status Timestamp Details
    09:15:51 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    09:15:53 Click on th setting button
    09:15:54 Navigate to the builder page
    09:15:56 Click on the 'Add New Builder button'
    09:15:56 Click on the 'Normal'
    09:15:57 Enter data in the Name Field
    09:15:59 Click on the Create button
  • Create a new framing material

    0h:6m:34s+437ms

    09:15:59 AM
    Create a new framing material
    2024-12-20 09:15:59 2024-12-20 09:22:33 0h:6m:34s+437ms
    Status Timestamp Details
    09:16:00 Click on th setting button
    09:16:27 Navigate to the setup wizard
    09:16:29 Click on the 'Framing' tab
    09:16:40 Delete TestHiddenMaterial data from setup wizard
    09:16:55 Save the Data in the Setup Wizard
    09:16:56 Click on th setting button
    09:17:23 Navigate to the setup wizard
    09:17:24 Click on the 'Framing' tab
    09:17:26 Click on the add button
    09:17:27 Enter TestHiddenMaterial in the sku input field
    09:17:28 Enter TestHiddenMaterial in the description input field
    09:17:28 Enter 10 in the width input field
    09:17:29 Enter 12 in the depth input field
    09:17:31 Select Truss Carrier Material - Truss Carrier element from usage table
    09:17:31 Click on the save button
    09:22:33 Test FailOpenQA.Selenium.WebDriverTimeoutException : Timed out after 300 seconds ----> OpenQA.Selenium.NoSuchElementException : no such element: Unable to locate element: {"method":"xpath","selector":"//input[@id='pushUsages']"} (Session info: chrome=131.0.6778.140); For documentation on this error, please visit: https://www.selenium.dev/documentation/webdriver/troubleshooting/errors#no-such-element-exception
    09:22:33 base64-img
  • Delete Data From Setup Wizard and job page

    0h:1m:40s+367ms

    09:22:43 AM
    Delete Data From Setup Wizard and job page
    2024-12-20 09:22:43 2024-12-20 09:24:24 0h:1m:40s+367ms
    Status Timestamp Details
    09:22:43 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    09:22:45 Click on th setting button
    09:22:46 Navigate to the builder page
    09:22:50 Click on the Delete button
    09:23:19 Click on the Yes button
    09:23:22 Click on th setting button
    09:23:49 Navigate to the setup wizard
    09:23:51 Click on the 'Framing' tab
    09:24:02 Delete TestHiddenMaterial data from setup wizard
    09:24:16 Save the data in the setup wizard using 'Push Usage Changes to Builders'.
    09:24:20 Click on the job tab
    09:24:23 Test FailCheckHiddenMaterial is not shown in the jobs table
    09:24:24 base64-img
  • Check opening tags

    0h:3m:50s+611ms

    09:26:14 AM
    Check opening tags
    2024-12-20 09:26:14 2024-12-20 09:30:05 0h:3m:50s+611ms
    Status Timestamp Details
    09:26:14 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    09:26:30 Click on the start from scratch
    09:26:50 Click on the opening
    09:26:51 Click on the walkdoor
    09:26:57 Click on the Custom
    09:26:59 Click on the opening
    09:27:00 Click on the overhead door
    09:27:05 Click on the Custom
    09:27:09 Click on the change view button
    09:27:09 Click on the Back Right
    09:27:09 Click on the opening
    09:27:10 Click on the windows
    09:27:16 Click on the Custom
    09:27:18 Click on the opening
    09:27:19 Click on the Slider
    09:27:24 Click on the Select A Style
    09:27:27 Click on the Select Standard Slider
    09:27:29 Place the custom Slider on the canvas building
    09:27:40 Click on the 'job review button' tab
    09:27:42 Click on the 'Door and Window tab'
    09:27:44 Verify the opening text displayed after the custom door and window materials in the job review section.
    09:27:46 Click on the ''Canvas 3D View'' tab
    09:27:48 Click on the 'job button' tab
    09:27:49 Enter PA-275 in the job name field
    09:28:23 Click on the save button
    09:28:25 Click on the outputs button
    09:28:26 Check the Job Bid checkbox
    09:28:44 Click on the download button
    09:28:51 Verify PDF File is downloaded
    09:28:53 Click on the outputs button
    09:28:55 Check the Excel Workbook checkbox
    09:29:16 Click on the download button
    09:29:17 Verify the opening text displayed after the custom door and window materials in the excel workbook.
    09:29:21 Click on the outputs button
    09:29:22 Check the Job Data CSV checkbox
    09:29:40 Click on the download button
    09:29:41 Verify the opening text displayed after the custom door and window materials in the csv file
    09:29:49 Click on the job tab
    09:29:54 open PA-275 job
    09:29:56 Click on the Delete button
    09:29:57 Click on the yes button
    09:30:00 Confirm Deletion
    09:30:05 Test Pass
  • Test Statuses of Jobs.

    0h:5m:46s+374ms

    09:31:55 AM
    Test Statuses of Jobs.
    2024-12-20 09:31:55 2024-12-20 09:37:41 0h:5m:46s+374ms
    Status Timestamp Details
    09:31:55 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    09:32:15 Click on the start from scratch
    09:32:27 Click on the 'job button' tab
    09:32:27 Enter CheckJobStatus in the job name field
    09:32:52 Click on the save button
    09:32:59 Click on the job tab
    09:33:00 Click on the filter icon
    09:33:01 Select Kritika Dhillon from user list
    09:33:05 Click on the filter icon
    09:33:08 All is unchecked from the filter list
    09:33:10 New is checked from the filter list
    09:33:15 Click on the Element (id = f.C2279EBF252AF71121379E929EC81888.d.AE8A1AF4562BAAAD6C30D9EC2FFE03A2.e.7672) button
    09:33:29 Click on the yes button
    09:33:35 Click on the filter icon
    09:33:35 Select Kritika Dhillon from user list
    09:33:39 Click on the filter icon
    09:33:41 All is unchecked from the filter list
    09:33:43 Quoted is checked from the filter list
    09:33:48 Click on the Element (id = f.C2279EBF252AF71121379E929EC81888.d.F588A36BEF56D13A7FC469DD7B9FA47B.e.7859) button
    09:33:50 Click on the RE-QUOTED button
    09:33:58 Click on the yes button
    09:34:03 Click on the filter icon
    09:34:03 Select Kritika Dhillon from user list
    09:34:07 Click on the filter icon
    09:34:09 All is unchecked from the filter list
    09:34:11 Requoted is checked from the filter list
    09:34:15 Verify that the re-quoted job is create in the job table
    09:34:17 Click on the Element (id = f.C2279EBF252AF71121379E929EC81888.d.93453C1B554677CED66B125B8CF0E195.e.8051) button
    09:34:20 Click on the yes button
    09:34:26 Click on the filter icon
    09:34:26 Select Kritika Dhillon from user list
    09:34:29 Click on the filter icon
    09:34:32 All is unchecked from the filter list
    09:34:33 Contracted is checked from the filter list
    09:34:36 Verify that the Contracted job status shown in the job table
    09:34:38 Click on the Element (id = f.C2279EBF252AF71121379E929EC81888.d.495ABF76BB694B6E6D4422975FA52AA3.e.8237) button
    09:34:41 Click on the yes button
    09:34:47 Click on the filter icon
    09:34:47 Select Kritika Dhillon from user list
    09:34:51 Click on the filter icon
    09:34:53 All is unchecked from the filter list
    09:34:54 OrderPrep is checked from the filter list
    09:34:58 Verify that the OrderPrep job status shown in the job table
    09:34:59 Click on the Element (id = f.C2279EBF252AF71121379E929EC81888.d.B6C99695161D015E382176535481D8A8.e.8419) button
    09:35:03 Click on the yes button
    09:35:09 Click on the filter icon
    09:35:09 Select Kritika Dhillon from user list
    09:35:14 Click on the filter icon
    09:35:16 All is unchecked from the filter list
    09:35:17 Ordered is checked from the filter list
    09:35:22 Verify that the Ordered job status shown in the job table
    09:35:23 Click on the Element (id = f.C2279EBF252AF71121379E929EC81888.d.14F242F91B7A1FFDD58802E83F123D02.e.8606) button
    09:35:34 Click on the yes button
    09:35:39 Click on the filter icon
    09:35:39 Select Kritika Dhillon from user list
    09:35:43 Click on the filter icon
    09:35:45 All is unchecked from the filter list
    09:35:47 Ammended is checked from the filter list
    09:35:50 Verify that the Ammended job status shown in the job table
    09:35:54 Click on the job tab
    09:35:55 Click On the Show Active button
    09:35:57 Verify that the Close job status shown in the job table
    09:35:58 Click on th setting button
    09:36:01 Navigate to the EModeler page
    09:36:17 Open a new tab with the job link copied from eModeler
    09:36:24 Click on the Submit For Quote
    09:36:28 Enter data in name field
    09:36:30 Enter data in email field
    09:36:33 Click on the Submit For Quote
    09:37:07 Click on the Ok button
    09:37:16 Click on the job tab
    09:37:29 open EModelerTakenJob job
    09:37:40 Click On the Show Active button
    09:37:41 Verify that the Taken job status shown in the job table
    09:37:41 Test Pass
  • Trusses and post are not aligned correctly for porch if bay spacing is applied

    0h:1m:18s+063ms

    09:39:32 AM
    Trusses and post are not aligned correctly for porch if bay spacing is applied
    2024-12-20 09:39:32 2024-12-20 09:40:50 0h:1m:18s+063ms
    Status Timestamp Details
    09:39:32 Log in to AUTOTEST_PHTEST Distributor for Test Environment
    09:39:51 Click on the start from scratch
    09:40:04 Click on the ''details' tab'
    09:40:05 Click on the ''bays' tab'
    09:40:05 Check the 'Use Bays Spacing' checkbox
    09:40:09 Set 12' to the 'Bays Spacing' dropdown
    09:40:18 Click on the 'Porch' tab
    09:40:20 Click on the 'Left'
    09:40:26 Set Offset Down to the 'Height' dropdown
    09:40:30 Set 1' 6" to the 'overhang' dropdown
    09:40:30 Check the 'Advanced' checkbox
    09:40:30 Check the 'Use Bay Spacing Checkbox For Opening' checkbox
    09:40:30 Uncheck the 'Don't combine walls Checkbox For Opening' checkbox
    09:40:34 Set Yes to the 'Include back wall' dropdown
    09:40:36 Click on the apply button
    09:40:46 Click on the change view button
    09:40:47 Click on the plan view
    09:40:49 Click on the 'Drawing' tab
    09:40:50 Click on the ''Assembly Drawing EXT_8''
    09:40:50 Verify that the Truss Block material appears when the user applies a porch with a double truss porch.
  • Case 2

    0h:0m:51s+595ms

    09:41:08 AM
    Case 2
    2024-12-20 09:41:08 2024-12-20 09:42:00 0h:0m:51s+595ms
    Status Timestamp Details
    09:41:08 Open Default job
    09:41:10 Click on the ''details' tab'
    09:41:12 Click on the ''bays' tab'
    09:41:12 Check the 'Use Bays Spacing' checkbox
    09:41:16 Set 12' to the 'Bays Spacing' dropdown
    09:41:25 Click on the 'Porch' tab
    09:41:27 Click on the 'Left'
    09:41:33 Set Offset Down to the 'Height' dropdown
    09:41:37 Set 1' 6" to the 'overhang' dropdown
    09:41:37 Check the 'Advanced' checkbox
    09:41:37 Check the 'Use Bay Spacing Checkbox For Opening' checkbox
    09:41:37 Uncheck the 'Don't combine walls Checkbox For Opening' checkbox
    09:41:41 Set Yes to the 'Include back wall' dropdown
    09:41:41 Check the 'Double Truss Checkbox For Opening' checkbox
    09:41:43 Click on the apply button
    09:41:55 Click on the change view button
    09:41:56 Click on the plan view
    09:41:58 Click on the 'Drawing' tab
    09:41:59 Click on the ''Assembly Drawing EXT_8''
    09:42:00 Verify that the Truss Block material disappears when the user applies a porch without a double truss porch.
    09:42:00 Test Pass
Tests
Tests

166

67.47%
Start
2024-12-19 23:23:04
Duration
10:18:55.4242155

Duration

10:18:55.5917182